ALBERT

Description: Fusarium species are known to establish manifold interactions with wild and crop plants ranging from pathogenicity to endophytism. One of the key factors involved in the regulation of such relationships is represented by the production of secondary metabolites. These include several mycotoxins, which can accumulate in foodstuffs causing severe health problems to humans and animals. In the present study, an endophytic isolate (A1021B), preliminarily ascribed to the Fusarium incarnatum-equiseti species complex (FIESC), was subjected to biochemical and molecular characterization. The metabolomic analysis of axenic cultures of A1021B detected up to 206 compounds, whose production was significantly affected by the medium composition. Among the most representative products, fusaric acid (FA), its derivatives fusarinol and 9,10-dehydro-FA, culmorin and bikaverin were detected. These results were in contrast with previous assessments reporting FIESC members as trichothecene rather than FA producers. However, molecular analysis provided a conclusive indication that A1021B actually belongs to the species Fusarium babinda. These findings highlight the importance of phylogenetic analyses of Fusarium species to avoid misleading identifications, and the opportunity to extend databases with the outcome of metabolomic investigations of strains from natural contexts. The possible contribution of endophytic strains in the differentiation of lineages with an uneven mycotoxin assortment is discussed in view of its ensuing impact on crop productions.

Description: Organic and low-input food systems are emerging worldwide in answer to the sustainability crisis of the conventional agri-food sector. “Alternative” systems are based on local, decentralized approaches to production and processing, regarding quality and health, and short supply-chains for products with strong local identities. Diversity is deeply embedded in these food systems, from the agrobiodiversity grown in farmers’ fields, which improves resilience and adaptation, to diverse approaches, contexts and actors in food manufacturing and marketing. Diversity thus becomes a cross-sectoral issue which acknowledges consumers’ demand for healthy products. In the framework of the European project “CERERE, CEreal REnaissance in Rural Europe: embedding diversity in organic and low-input food systems”, the paper aims at reviewing recent research on alternative and sustainable food systems by adopting an innovative and participatory multi-actor approach; this has involved ten practitioners and twenty-two researchers from across Europe and a variety of technical backgrounds in the paper and analysis stages. The participatory approach is the main innovation and distinctive feature of this literature review. Partners selected indeed what they perceived as most relevant in order to facilitate a transition towards more sustainable and diversity based cereal systems and food chains. This includes issues related to alternative food networks, formal and informal institutional settings, grass root initiatives, consumer involvement and, finally, knowledge exchange and sustainability. The review provides an overview of recent research that is relevant to CERERE partners as well as to anyone interested in alternative and sustainable food systems. The main objective of this paper was indeed to present a narrative of studies, which can form the foundation for future applied research to promote alternative methods of cereal production in Europe.

Description: Aluminum alloys are key materials in additive manufacturing (AM) technologies thanks to their low density that, coupled with the possibility to create complex geometries of these innovative processes, can be exploited for several applications in aerospace and automotive fields. The AM process of these alloys had to face many challenges because, due to their low laser absorption, high thermal conductivity and reduced powder flowability, they are characterized by poor processability. Nowadays mainly Al-Si alloys are processed, however, in recent years many efforts have been carried out in developing new compositions specifically designed for laser based powder bed AM processes. This paper reviews the state of the art of the aluminum alloys used in the laser powder bed fusion process, together with the microstructural and mechanical characterizations.

Description: The use of pesticides in agriculture is a significant problem at a global level, not only from an environmental perspective but also from the farmers’ health and safety point of view. In the literature, several studies have discussed the safe behavior and risk perception of farmers. However, human errors when dealing with pesticides and the related work equipment are rarely considered. To reduce this research gap, a study of the human safety errors in pesticide use based on hierarchical task analysis is proposed. In particular, such a bottom-up approach was applied to vineyard cultivation and considered all the activities that operators carry out when using pesticides. The results of this study showed that most of the identified human errors were action errors, i.e., potential failures of the operator in completing the activity successfully. In addition, retrieval and checking errors resulted in being rather common. These outputs shed light on the gap between the information received and the practical need for operators to reduce their failure to perform specific activities. Therefore, while the present study augments current knowledge on the safe use of pesticides, further research is needed to address human errors in agricultural activities, thus extending these results to a larger sample size as well as to other cultivation types.

Description: Livestock site use intensity can vary widely across a grazing area due to several factors such as topography and distance from sheds and water sources. However, an accurate approximation of animal site use should be assessed for each part of the grazing area to apply effective management strategies. In the Alps, shepherds manage sheep through lenient supervision during the day and confining the animals in temporary night penning areas (TNPA) at night. In our case study, we assessed sheep site use over the grazing area with global positioning system (GPS) collars and calculated the sums of inverse distances from all TNPA (unweighted and weighted on the number of penning nights) and from all water sources, as well as the slope, on 118 sample points. We assessed the relative importance of these variables in affecting site use intensity by animals using different sets of models. Both the unweighted and weighted distances from TNPA were found to be the most important factors. The best fitting model accounted for the weighted distance from TNPA and the distance from water, but the latter showed a lower relative importance. Our study suggests that using the distance from TNPA, preferably weighted on the number of penning nights, is an effective proxy to estimate the spatial variability of sheep stocking rate during grazing in the Alps.

Description: Background: Macro- and micro-geometry are among the factors influencing implant stability and potentially determining loading protocol. The purpose of this study was to test a protocol for early loading by controlling implant stability with the selection of fixtures with different thread depth according to the bone density of the implant site. Materials and Methods: Patients needing implant therapy for fixed prosthetic rehabilitation were treated by inserting fixtures with four different thread diameters, selected based on clinical assessment of bone quality at placement (D1, D2, D3, and D4, according to Misch classification). Final insertion torque (IT) and implant stability quotient (ISQ) were recorded at baseline and ISQ measurements repeated after one, two, three, and four weeks. At the three-week measurement (four weeks after implant replacement), implants with ISQ 〉 70 Ncm were functionally loaded with provisional restorations. Marginal bone level was radiographically measured 12 months after implant insertion. Results: Fourteen patients were treated with the insertion of forty implants: Among them, 39 implants showing ISQ 〉 70 after 3 weeks of healing were loaded with provisional restoration. Mean IT value was 82.3 ± 33.2 Ncm and varied between the four different types of bone (107.2 ± 35.6 Ncm, 74.7 ± 14.0 Ncm, 76.5 ± 31.1 Ncm, and 55.2 ± 22.6 Ncm in D1, D2, D3, and D4 bone, respectively). Results showed significant differences except between D2 and D3 bone types. Mean ISQ at baseline was 79.3 ± 4.3 and values in D1, D2, D3, and D4 bone were 81.9 ± 2.0, 81.1 ± 1.0, 78.3 ± 3.7, and 73.2 ± 4.9, respectively. Results showed significant differences except between D1 and D2 bone types. IT and ISQ showed a significant positive correlation when analyzing the entire sample (p = 0.0002) and D4 bone type (p = 0.0008). The correlation between IT and ISQ was not significant when considering D1, D2, and D3 types (p = 0.28; p = 0.31; p = 0.16, respectively). ISQ values showed a slight drop at three weeks for D1, D2, and D3 bone while remaining almost unchanged in D4 bone. At 12-month follow-up, all implants (39 early loading, 1 conventional loading) had satisfactory function, showing an average marginal bone loss of 0.12 ± 0.12 mm, when compared to baseline levels. Conclusion: Matching implant macro-geometry to bone density can lead to adequate implant stability both in hard and soft bone. High primary stability and limited implant stability loss during the first month of healing could allow the application of early loading protocols with predictable clinical outcomes.

Description: «You take delight not in a city’s seven or seventy wonders, but in the answer it gives to a question of yours». Those are the words used by Italo Calvino in his book “Invisible Cities” to give us a key aspect of a city, and it is from this consideration that this research work starts. In particular, the aim is to study and develop innovative solutions that guarantee value for the territory and for the cultural and landscape assets that insist on it. At the same time, such innovative solutions should be able to make the answers, connected to these resources, “tailored” to the user who requested it. For this reason, an architecture will be described, which allows content generating actors and users to operate by means of a broker-platform. Through this platform, it is possible to search a content within a Knowledge Base and, through the automatic orchestration of services, to activate in a controlled way the access and fruition of the information contained in it.

Description: Hastelloy X (HX) is a Ni-based superalloy which is employed to produce gas turbine and gas-cooled reactor sectors due to its outstanding oxidation resistance and high tensile strength at high temperatures. This alloy can be processed by laser powder bed fusion (LPBF) fabricating complex geometries in a single step. However, post-processing thermal treatments must be applied to generate a suitable microstructure for high-temperature applications. The investigation reports the microstructure evolution of LPBF HX samples under specific post-processing treatments. A hot isostatic pressing (HIP) treatment can close the internal cracks and reduce the residual porosity (less than 0.1%). Moreover, the HIP-triggered recrystallization generated equiaxed grains, while the slow cooling rate generated a film of intergranular carbides (Mo-rich M6C and Cr-rich M23C6) and intragranular carbides (Mo-rich M6C carbides). Therefore, a solution annealing was performed to dissolve the film of carbides which may reduce the ductility. The post solution annealed material consisted of equiaxed grains with ASTM grain size number mainly 4.5-5.5 and inter/intragranular Mo-rich M6C carbides. The microstructure is highly comparable with solution annealed wrought HX alloy. Finally, after simulating short thermal exposure at 745 °C for 6 h, a significant formation of Cr-rich M23C6 carbides was observed strengthening the LPBF HX alloy.

Description: The attention paid to the use of pesticides has increased notably in recent years as demonstrated by the issue of laws and regulations requiring their safe and environmentally-conscious use (e.g. Directive 2009/128/EC and Regulation (EC) no. 1272/2008). Despite the benefits that can be achieved by pursuing the targets of stricter legislative framework, the difficulties for farmers in complying with it are remarkable, especially for small-sized companies. In fact, in contrast to other occupational health and safety (OHS) contexts, in the case of pesticides even a preliminary analysis on the relationship between pesticide use and the consequent exposure risks for the workers is a complex task. In order to reduce the above-mentioned gap, the present study is focused on the development of an easy-to-use tool for carrying out occupational risk assessment of agricultural activities related to the use of pesticides. The procedure was developed by starting from the Agricultural Health Study (AHS) approach and its improvements, and continuing to the thorough development of a tool for preliminary risk assessment, providing a simplified model for its practical application by farmers. A case study concerning olive cultivation was used for its first verification. The results achieved should be considered as an initial step for the promotion of safer practices when using pesticides, providing a consistent base for their further validation.

Description: Integrated Information Theory (IIT) intends to provide a principled theoretical approach able to characterize consciousness both quantitatively and qualitatively. By starting off identifying the fundamental properties of experience itself, IIT develops a formal framework that relates those properties to the physical substratum of consciousness. One of the central features of ITT is the role that information plays in the theory. On the one hand, one of the self-evident truths about consciousness is that it is informative. On the other hand, mechanisms and systems of mechanics can contribute to consciousness only if they specify systems’ intrinsic information. In this paper, we will conceptually analyze the notion of information underlying ITT. Following previous work on the matter, we will particularly argue that information within ITT should be understood in the light of a causal-manipulabilist view of information (López and Lombardi 2018), conforming to which information is an entity that must be involved in causal links in order to be precisely defined. Those causal links are brought to light by means of interventionist procedures following Woodward’s and Pearl’s version of the manipulability theories of causation.