ALBERT

Description: The Antarctic Centennial Oscillation (ACO) is a paleoclimate temperature cycle that originates in the Southern Hemisphere, is the presumptive evolutionary precursor of the contemporary Antarctic Oscillation (AAO), and teleconnects to the Northern Hemisphere to influence global temperature. In this study we investigate the internal climate dynamics of the ACO over the last 21 millennia using stable water isotopes frozen in ice cores from 11 Antarctic drill sites as temperature proxies. Spectral and time series analyses reveal that ACOs occurred at all 11 sites over all time periods evaluated, suggesting that the ACO encompasses all of Antarctica. From the Last Glacial Maximum through the Last Glacial Termination (LGT), ACO cycles propagated on a multicentennial time scale from the East Antarctic coastline clockwise around Antarctica in the streamline of the Antarctic Circumpolar Current (ACC). The velocity of teleconnection (VT) is correlated with the geophysical characteristics of drill sites, including distance from the ocean and temperature. During the LGT, the VT to coastal sites doubled while the VT to inland sites decreased fourfold, correlated with increasing solar insolation at 65°N. These results implicate two interdependent mechanisms of teleconnection, oceanic and atmospheric, and suggest possible physical mechanisms for each. During the warmer Holocene, ACOs arrived synchronously at all drill sites examined, suggesting that the VT increased with temperature. Backward extrapolation of ACO propagation direction and velocity places its estimated geographic origin in the Southern Ocean east of Antarctica, in the region of the strongest sustained surface wind stress over any body of ocean water on Earth. ACO period is correlated with all major cycle parameters except cycle symmetry, consistent with a forced, undamped oscillation in which the driving energy affects all major cycle metrics. Cycle period and symmetry are not discernibly different for the ACO and AAO over the same time periods, suggesting that they are the same climate cycle. We postulate that the ACO/AAO is generated by relaxation oscillation of Westerly Wind velocity forced by the equator-to-pole temperature gradient and propagated regionally by identified air-sea-ice interactions.

Description: Subirrigation (SI), where water is provided to container seedlings from below and rises through the growing media via capillary action, is regarded as an environmentally-responsible method of delivering water and fertilizer to nursery-grown plants, resulting in more uniform crops and improved production efficiency. While a concern around adopting this method is that a potential higher salt concentration in the upper layers of growing media under SI may inhibit root growth and result in decreased plant quality, few studies have focused on how root morphology is altered by SI. Therefore, a balanced two-factor factorial design with three rates of fertilization (50, 100, and 150 mg N seedling−1) and two irrigation methods (SI or overhead irrigation (OI)) was used to examine the growth response of Prince Rupprecht’s larch (Larix principis-rupprechtii Mayr) seedlings for one nursery season. Associated changes between rhizosphere electrical conductivity (EC) and root morphology of different root size classes were analyzed. Results show that (1) height, root-collar diameter, and root volume were similar between seedlings grown under SI and OI. However, (2) compared to seedlings receiving OI, SI-seedlings had less root mass, length, and surface area but greater average root diameter (ARD). (3) Morphological differences were evident primarily in root diameter size classes I–III (D ≤ 1.0 mm). (4) Fertilizer rate influenced root length and surface area up to 130 days after sowing but affected ARD throughout the growing season such that seedlings treated with 50 mg N had smaller ARD than seedlings treated with 100 mg N. (5) As the growing season progressed, SI-media had significantly higher EC compared to OI-media and EC increased with increasing fertilizer rate under SI but not under OI. These results indicate that SI can produce larch seedlings of similar height and root collar diameter (RCD) compared to OI, but root systems are smaller overall with fewer small-diameter roots, which may be related to high EC levels in SI-media, which is exacerbated by the use of high rates of fertilizer. Therefore, the EC in the media should be monitored and adjusted by reducing fertilizer rates under SI.

Description: Circadian rhythms allow an organism to synchronize internal physiological responses to the external environment. Perception of external signals such as light and temperature are critical in the entrainment of the oscillator. However, sugar can also act as an entraining signal. In this work, we have confirmed that sucrose accelerates the circadian period, but this observed effect is dependent on the reporter gene used. This observed response was dependent on sucrose being available during free-running conditions. If sucrose was applied during entrainment, the circadian period was only temporally accelerated, if any effect was observed at all. We also found that sucrose acts to stabilize the robustness of the circadian period under red light or blue light, in addition to its previously described role in stabilizing the robustness of rhythms in the dark. Finally, we also found that CCA1 is required for both a short- and long-term response of the circadian oscillator to sucrose, while LHY acts to attenuate the effects of sucrose on circadian period. Together, this work highlights new pathways for how sucrose could be signaling to the oscillator and reveals further functional separation of CCA1 and LHY.

Description: Epidemiological studies consistently show an association between wildfire-related smoke exposure and adverse respiratory health. We conducted a systematic review of evidence in published literature pertaining to heterogeneity of respiratory effects from this exposure in North America. We calculated the within-study ratio of relative risks (RRR) and 95% confidence intervals (CI) to examine heterogeneity of effect by population subgroup, and then summarized the RRRs using meta-analysis. We found evidence of a greater effect of wildfire smoke on respiratory health among females relative to males for asthma (RRR: 1.035, 95% CI: 1.013, 1.057) and chronic obstructive pulmonary disease (RRR: 1.018, 95% CI: 1.003, 1.032). There was evidence of a lower relative risk for all respiratory outcomes among youth compared to adults (RRR: 0.976, 95% CI: 0.963, 0.989). We also found wildfire smoke effects stratified by income, race, education, health behaviors, access to care, housing occupancy, geographic region, and urban/rural status. However, data were insufficient to quantitatively evaluate effect modification by these characteristics. While we found evidence that certain demographic subgroups of the population are more susceptible to respiratory health outcomes from wildfire smoke, it is unclear whether this information can be used to inform policy aimed to reduce health impact of wildfires.

Description: Historically, high carbon steels have been used in mechanical applications because their high surface hardness contributes to excellent wear performance. However, in aggressive environments, current bearing steels exhibit insufficient corrosion resistance. Martensitic stainless steels are attractive for bearing applications due to their high corrosion resistance and ability to be surface hardened via carburizing heat treatments. Here three different carburizing heat treatments were applied to UNS S42670: a high-temperature temper (HTT), a low-temperature temper (LTT), and carbo-nitriding (CN). Magnetic force microscopy showed differences in magnetic domains between the matrix and carbides, while scanning Kelvin probe force microscopy (SKPFM) revealed a 90–200 mV Volta potential difference between the two phases. Corrosion progression was monitored on the nanoscale via SKPFM and in situ atomic force microscopy (AFM), revealing different corrosion modes among heat treatments that predicted bulk corrosion behavior in electrochemical testing. HTT outperforms LTT and CN in wear testing and thus is recommended for non-corrosive aerospace applications, whereas CN is recommended for corrosion-prone applications as it exhibits exceptional corrosion resistance. The results reported here support the use of scanning probe microscopy for predicting bulk corrosion behavior by measuring nanoscale surface differences in properties between carbides and the surrounding matrix.

Description: The ecology of complex microhabitats remains poorly characterized in most tropical and subtropical biomes, and holds potential to help understand the structure and dynamics of different biodiversity components in these ecosystems. We assessed nutritional and metabolic parameters of two bromeliad species (Aechmea gamosepala and Vriesea platynema) at an Atlantic Forest site and used 16S rDNA metabarcoding to survey the microbial communities inhabiting their tanks. We observed that levels of some nutrients (e.g., nitrogen) varied across seasons consistently in both species, while others (e.g., phenolic compounds) presented considerable differences between the two bromeliads. In contrast, patterns of tank microbial diversity did not follow a similar temporal trend. There was extensive variation in microbial composition among samples, which included intra-specific differences but also some consistent differences between the two bromeliads. For example, Citrobacter, Klebsiella and Pantoea presented significantly different abundances in the two species. Interestingly, the dominant bacterial genera in both species included Pseudomonas and Enterobacter, which have been reported to include plant-beneficial species. Overall, our data contribute to the characterization of the nutritional status of Atlantic Forest bromeliads and the composition of their prokaryotic communities, laying the foundation for detailed investigations targeting the ecological interactions between these plants and their associated microbes.

Description: Although fibre Bragg gratings (FBGs) offer obvious potential for use in high-density, high-strain sensing applications, the adoption of this technology in the historically conservative aerospace industry has been slow. There are several contributing factors, one of which is variability in the reported performance of these sensors in harsh and fatigue prone environments. This paper reports on a comparative evaluation of the fatigue performance of FBG sensors written according to the same specifications using three different grating manufacturing processes: sensors written in stripped and re-coated fibres, sensors written during the fibre draw process and sensors written through fibre coating. Fatigue cycling of the fibres is provided by a customized electro-dynamically actuated loading assembly designed to provide high frequency and amplitude loading. Pre- and post-fatigue microscopic analysis and high-resolution transmission and reflection spectra scanning are conducted to investigate the fatigue performance of FBGs, the failure regions of fibres as well as any fatigue-related effects on the spectral profiles. It was found that because of the unique fabrication method, the sensors written through the fibre coating, also known as trans-jacket FBGs, show better fatigue performance than stripped and re-coated FBGs with greater control possible to tailor the optical reflection properties compared to gratings written in the draw tower. This emerging method for inscription of Type I gratings opens up the potential for mass production of higher reflectivity, apodised sensors with dense or complex array architectures which can be adopted as sensors for harsh environments such as in defence and aerospace industries.

Description: Research on Land Use and Land Cover (LULC) dynamics, and an understanding of the drivers responsible for these changes, are very crucial for modelling future LULC changes and the formulation of sustainable and robust land-management strategies and policy decisions. This study adopted a mixed method consisting of remote sensing and Geographic Information System (GIS)-based analysis, focus-group discussions, key informant interviews, and semi-structured interviews covering 586 households to assess LULC dynamics and associated LULC change drivers across the Dedza district, a central region of Malawi. GIS-based analysis of remotely sensed data revealed that barren land and built-up areas extensively increased at the expense of agricultural and forest land between 1991 and 2015. Analysis of the household-survey results revealed that the perceptions of respondents tended to validate the observed patterns during the remotely sensed data-analysis phase of the research, with 57.3% (n = 586) of the respondents reporting a decline in agricultural land use, and 87.4% (n = 586) observing a decline in forest areas in the district. Furthermore, firewood collection, charcoal production, population growth, and poverty were identified as the key drivers of these observed LULC changes in the study area. Undoubtedly, education has emerged as a significant factor influencing respondents’ perceptions of these drivers of LULC changes. However, unsustainable LULC changes observed in this study have negative implications on rural livelihoods and natural-resource management. Owing to the critical role that LULC dynamics play to rural livelihoods and the ecosystem, this study recommends further research to establish the consequences of these changes. The present study and future research will support decision makers and planners in the design of tenable and coherent land-management strategies.

Description: Few longitudinal studies have examined occupational injury as a predictor of employment termination, particularly during the earliest stages of employment when the risk of occupational injury may be greatest. Human resources (HR) records were used to establish a cohort of 3752 hourly employees newly hired by a large manufacturing facility from 2 January 2012, through 25 November 2016. The HR records were linked with records of employee visits to an on-site occupational health center (OHC) for reasons consistent with occupational injury. Cox regression methods were then used to estimate the risk of employment termination following a first-time visit to the OHC, with time to termination as the dependent variable. Analyses were restricted to the time period ending 60 calendar days from the date of hire. Of the 3752 employees, 1172 (31.2%) terminated employment prior to 60 days from date of hire. Of these, 345 terminated voluntarily and 793 were terminated involuntarily. The risk of termination for any reason was greater among those who visited the OHC during the first 60 days of employment than among those who did not visit the OHC during the first 60 days of employment (adjusted hazard ratio = 2.58, 95% CI = 2.12–3.15). The magnitude of effect was similar regardless of the nature of the injury or the body area affected, and the risk of involuntary termination was generally greater than the risk of voluntary termination. The results support activities to manage workplace safety and health hazards in an effort to reduce employee turnover rates.

Description: This study estimates the non-market value of horse farms of Central Kentucky’s equine economic cluster using a contingent valuation approach. Utilizing a payment card, respondents are asked to indicate how much they would be willing to pay in additional taxes for a hypothetical “horse farm preservation program.” Results from the study showed that, on average, a Central Kentucky household was willing to pay an additional $55.14–$67.78 in taxes annually to maintain the equine industry at its current levels. The additional taxes generated would compensate for lost tax revenue from development of the land.