ALBERT

Description: Phytoplankton productivity and community structure in the East China Sea (ECS) play an important role in marine ecology and carbon cycle, but both have been changing rapidly in response to recent oceanic and atmospheric circulation changes. However, the lack of long-term records of phytoplankton productivity and community structure variability in the region hinders our understanding of natural forcing mechanisms. Here, we use the phytoplankton biomarker (brassicasterol, dinosterol and alkenones) contents as well as the ratios between these biomarkers in three sediment cores from the ECS shelf to reconstruct the spatiotemporal variations of productivity and community of diatoms, dinoflagellates and coccolithophores during the Holocene, respectively. During 9–7 ka, the ECS shelf was characterized by low phytoplankton productivity with low coccolithophore contribution, caused by the oligotrophic condition mainly owing to the restricted Kuroshio Current (KC) intrusion under low sea-level conditions, thus the lack of nutrient input. Phytoplankton productivity generally increased during 7–4.6 ka, in response to the initial intrusion of the Yellow Sea Warm Current (YSWC, a branch of the KC), bringing nutrient from the subsurface KC to the upper layer of the ECS for phytoplankton growth. Phytoplankton productivity continuously increased during 4.6–1 ka, due to an enhanced circulation system (YSWC and Yellow Sea Coastal Current (YSCC)) driven by strong East Asia Winter Monsoon (EAWM). Significantly, high alkenone contents and coccolithophore contribution in the eastern core F11A was associated with its location closer to the warm and saline YSWC, which was suitable for coccolithophore growth. Beyond diagenetic processes which could partly account for higher biomarker contents near core tops, elevated phytoplankton productivity during the last 1 ka might be induced by more nutrient supply from the intensified circulation system driven by enhanced KC and anthropogenic activities. The latter also resulted in high dinoflagellate proportions in all three cores. These temporal and spatial changes of phytoplankton productivity and community structure in the ECS during the Holocene corresponded to different mechanisms by the air-sea interaction, providing insights into distinguishing natural forcing and anthropogenic influences on marine ecology.

Description: In this study, organic geochemical analyses of two sediment cores (BL16 and LV63–23) recovered from the western Bering Sea were carried out to examine the sea-ice variability and its relationship to phytoplankton community evolution over the past century. Bulk stable organic carbon isotopic composition (δ13CTOC) showed pronounced depletion on the northern shelf since the late 1970s, indicating greater terrigenous organic matter (OM) under warming during recent decades. Variation in sedimentary OM in the southward core was closely associated with marine primary productivity and regional deposition processes. Arctic sea-ice proxy IP25 throughout the two cores with different temporal profile patterns demonstrated sea-ice presence with the spatiotemporal variability across the study area over the past century. The phytoplankton marker-IP25 index (PIP25), a proxy for estimating semi-quantitatively sea-ice concentrations, reflected a decreased sea-ice cover with more distinct interannual fluctuations between 0.7 and 0.2 (especially in core BL16) after the late 1970s, coinciding with the recent warming scenario. Increased concentrations of phytoplankton biomarkers (brassicasterol and dinosterol) and their ratios as well as the PIP25 record in core BL16 indicated a synchronous variability of reduced sea-ice cover with the enhancement of phytoplankton productivity since the late 1970s. These results suggested a coupled interaction of the sea-ice condition and planktonic ecosystem in the north Bering shelf. Our results also revealed recent (since the 2000s) spatial heterogeneity in sea-ice coverage between the northern and southern parts of the Bering Sea.

Description: Millennial scale variations of terrigenous provenance in marine realm are closely related to regional environment and climate changes. Therefore, a wealth of information of past environment and climate can be constrained via fingerprinting sediment provenance. The Sea of Japan is a unique marginal sea in the North Pacific due to its high sill and distinct thermohaline circulation. The modern hydrography in the Sea of Japan is mainly affected by the East Asian Monsoon and Tsushima Warm Current, one branch of the Kuroshio Current. The Sea of Japan communicates with neighboring seas through four shallow and narrow straits, indicating great effects of global eustatic sea level change on its environment over glacial-interglacial cycles. Here we examine the terrigenous provenance in fine-grained fraction (〈63 μm) of core KCES1, located near one end of the Tsushima Strait of the Sea of Japan over the last 48 ka, using radiogenic isotopes of strontium (Sr) and neodymium (Nd). Our data suggest that the terrigenous provenance in core KCES1 was mainly derived from the Yangtze River after 7 ka and a mixture of Yangtze and Yellow Rivers during the last glacial and deglacial periods. Notably, pronounced negative excursions of εNd values at HS1 were attributed to minor additions of unradiogenic Nd contribution from China-Korea cratonic hinterland. A binary mixing model further reveals that 〉85% terrigenous material is derived from the Yangtze and Yellow Rivers over the last 48 ka. Moreover, abrupt variations in sediment provenance occurred at ~18 ka and ~ 7 ka, which coincide with variations in oceanic surface circulation and deep ventilation recorded in the Sea of Japan. We suggest that paleo-Tsushima Warm Current invaded into the Sea of Japan with reopening of the Tsushima Strait at HS1 and the Tsushima Warm Current substantially entered the Sea of Japan after 7 ka due to intensified Kuroshio Current and rising eustatic sea level. The inflow of Tsushima Warm Current gives rise to a range of changes in surface hydrography, deep ventilation, ecological communities and productivity and sediment texture. The combination of fluxes of paleo-rivers and the intensity of Kuroshio Current, which are closely tied to the eustatic sea level and the East Asian Monsoon, plays a key role in controlling the variations in sediment provenance in the Ulleung Basin. Our study provides unique insight into the tight coupling between changes in sediment provenance and oceanic environment over the last 48 ka in the Sea of Japan.

Description: The Kuroshio Current (KC) is the northward branch of the North Pacific subtropical gyre (NPG) and exerts influence on the exchange of physical, chemical, and biological properties of downstream regions in the Pacific Ocean. Resolving long-term changes in the flow of the KC water masses is, therefore, crucial for advancing our understanding of the Pacific's role in global ocean and climate variability. Here, we reconstruct changes in KC dynamics over the past 20 ka based on grain-size spectra, clay mineral, and Sr–Nd isotope constraints of sediments from the northern Okinawa Trough. Combined with published sediment records surrounding the NPG, we suggest that the KC remained in the Okinawa Trough throughout the Last Glacial Maximum. Together with Earth-System-Model simulations, our results additionally indicate that KC intensified considerably during the early Holocene (EH). The synchronous establishment of the KC “water barrier” and the modern circulation pattern during the EH highstand shaped the sediment transport patterns. This is ascribed to the precession-induced increase in the occurrence of La Niña-like state and the strength of the East Asian summer monsoon. The synchronicity of the shifts in the intensity of the KC, Kuroshio extension, and El Niño/La Niña-Southern Oscillation (ENSO) variability may further indicate that the western branch of the NPG has been subject to basin-scale changes in wind stress curl over the North Pacific in response to low-latitude insolation. Superimposed on this long-term trend are high-amplitude, large century, and millennial-scale variations during last 5 ka, which are ascribed to the advent of modern ENSO when the equatorial oceans experienced stronger insolation during the boreal winter.

Description: Major shifts in ocean circulation are thought to be responsible for abrupt changes in temperature and atmospheric CO2 during the last deglaciation, linked to variability in meridional heat transport and deep ocean carbon storage. There is also widespread evidence for shifts in biological production during these times of deglacial CO2 rise, including enhanced diatom production in regions such as the tropical Atlantic. However, it remains unclear as to whether this diatom production was driven by enhanced wind-driven upwelling or density-driven vertical mixing, or by elevated thermocline concentrations of silicic acid supplied to the surface at a constant rate. Here, we demonstrate that silicic acid supply at depth in the NE Atlantic was enhanced during the abrupt climate events of the deglaciation. We use marine sediment archives to show that an increase in diatom production during abrupt climate shifts could only occur in regions of the NE Atlantic where the deep supply of silicic acid could reach the surface. The associated changes are indicative of enhanced regional wind-driven upwelling and/or weakened stratification due to circulation changes during phases of weakened Atlantic meridional overturning. Globally near-synchronous pulses of diatom production and enhanced thermocline concentrations of silicic acid suggest that widespread deglacial surface-driven breakdown of stratification, linked to changes in atmospheric circulation, had major consequences for biological productivity and carbon cycling.

Description: We explored an adaptive maintenance model of the process environment to diagnose progressive faults in manufacturing systems. Progressive faults are usually caused by deterioration of the operating environment or aging and show stochastic properties. Many researchers have reported how to detect faults on the machine body in manufacturing systems. However, little research has been conducted on the process environment which causes progressive faults. To tackle this problem, we explored an adaptive maintenance model to detect progressive faults and repair the process environment on the E-repair location. When a difference of the environmental factor state is detected, it will combine the transcription factor and the state enzyme to locate fault source. Then the comprehensive maintenance program is derived to repair the operating environment while eliminating progressive faults. For the purpose of validation, this model was implemented on the process environment of the air separation plant. And the simulation experiments validated the feasibility and effectiveness of this method.

Description: To solve the problem of separation and recovery of photocatalyst in water, the modification of TiO2 was studied as well as its immobilization and photocatalytic properties. To improve surface properties, TiO2 nanotubes were synthesized by a hydrothermal method and silylated by silane coupling agents to introduce a certain functional group. Supported on polyurethane (PU) membrane, TiO2 nanotubes were prepared to produce immobilized PU/TiO2. Catalysts were characterized and identified by means of Fourier-transform infrared spectroscopy (FTIR), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), and scanning electron microscopy (SEM). Results showed that silylated TiO2 nanotubes were well grafted on the surface of the activated PU membrane. With a 300 W high pressure mercury lamp as light source, the photocatalytic activity and stability of immobilized PU/TiO2 were investigated with degrading methyl orange. It was showed that the target is degraded by immobilized PU/TiO2 with high activation and the catalytic performance is stable for a long time if catalyst is washed with ethanol.

Description: This study established a LabVIEW-based virtual instrument system to measure optical activity through the communication of conventional optical instrument with computer via RS232 port. This system realized the functions for automatic acquisition, real-time display, data processing, results playback, and so forth. Therefore, it improved accuracy of the measurement results by avoiding the artificial operation, cumbersome data processing, and the artificial error in optical activity measurement. The system was applied to the analysis of the batch inspection on the sugar degree of honey. The results obtained were satisfying. Moreover, it showed advantages such as friendly man-machine dialogue, simple operation, and easily expanded functions.