ALBERT

Description: This data set includes digital image correlation data from thirteen analogue earthquakes generated by means of an analogue seismotectonic scale model approach. The data consists of grids of 3D static coseismic surface displacements. The data have been derived using a stereo camera setup and processed with LaVision Davis 8 software. Detailed descriptions of the experiments and results regarding the control of geodetic coverage on the slip inversion problem can be found in Kosari et al. (in review) to which this data set is supplementary material. We use an analogue seismotectonic scale model approach (Rosenau et al., 2017) to generate a catalogue of analogue megathrust earthquakes (Table 1). The presented experimental setup is modified from the 3D setup used in Rosenau et al. (2019). To monitor surface deformation of the wedge analogue model a stereoscopic set of two CCD cameras (LaVision Imager pro X 11MPx, 14 bit) monitors images the wedge surface continuously at 2.5 Hz. To derive observational data similar to those from geodetic techniques, i.e. velocities at the location on the surface, we use digital image correlation (DIC, Adam et al., 2005) to derive the 3D incremental surface displacement (or velocity) at high spatial resolution (〈 0.1 mm). The time series of incremental surface displacement data was calculated using LaVision Davis 8 software. The result is an evenly spaced grid of vectors per time step, oriented parallel with respect to the principal dimensions of the box.

Description: This dataset is supplementary material to the article of Ritter et al. (2017). In this article, the similarity of fault propagation work in analogue sandbox experiments to natural fault networks is investigated through measurements in a strike-slip sandbox and in a ring-shear-tester. The transient shear strength of the samples is measured for different fault lengths and from this the work is determined. For a detailed description of the procedure and the set-up please see Ritter et al. (2017). The data available in this supplementary publication are: • For the strike-slip experiments three video sequences of the deformation together with the evolution of boundary force for fault lengths of 20 cm, 30 cm and 40 cm. The videos show the curl of the deformation field, determined by Digital Image Correlation of top-view video images. These files are in AVI-format and included in the zip folder 2017-005-Ritter-movies.zip. • A folder containing force vs. displacement measurements for each experiment (2017-005-Ritter-forces.zip). These are 25 ASCII-files that contain two columns of numerical data: the first column is the displacement in meter; the second column is the corresponding force in newton. The files are named according to the following pattern: 〈fault length in meter〉_〈experiment number〉.asc • A Matlab script to load the force files and calculate the work. This file is called “plotwork.m” and calls the Matlab function “work.m”, which does the actual calculations. These files have been tested in Matlab version 2012b. The surface deformation data are available upon request.

Description: The presented datasets and scripts have been obtained for testing the performance of a trigger algorithm for use in combination with a ringshear tester ‘RST-01.pc’. Glass beads (fused quartz microbeads, 300-400 µm diameter) and thai rice are sheared at varying velocity, stiffness and normal load. The data is provided as preprocessed mat-files ('*.mat') to be opened with Matlab R2015a and later. Several scripts are provided to reproduce the figures found in (Rudolf et al., submitted). A detailed list of files together with the respective software needed to view and execute them is available in 'List_of_Files_Rudolf-et-al-2018.pdf' (also available in MS Excel Format). More information on the datasets and a small documentation of the scripts is given in 'Explanations_Rudolf-et-al-2018.pdf'. The complete data publication, including all descriptions, datasets, and evaluation scripts is available as 'Dataset_Rudolf-et-al-2018.zip'.

Description: The present dataset is a high-resolution earthquake catalog for the region of the 2014 M8.1 Iquique earthquake sequence, in the Northern Chile subduction zone. Events in the catalog were obtained processing seismic waveforms from 〉100 permanent and temporary seismic stations. The list of waveform data sources used, the multistage automatic earthquake detection and location procedure implemented to build the catalog, as well as the patterns outlined by the seismicity are described in Soto et al. (2019).

Description: The 208 km long profile 3B/MVE (West) was recorded in 1990 as part of the joint seismic reflection venture DEKORP 1990-3/MVE (Muenchberg-Vogtland-Erzgebirge) between the two former German Republics shortly before their unification. The aim of DEKORP 1990-3/MVE was to explore the structure of the crust from the Rhenish Shield through the Bohemian Massif to the Ore Mountains. The entire profile consists of DEKORP 3A, DEKORP 3B/MVE (West) and its prolongation to the east DEKORP 3B/MVE (East). Its total length amounts to about 600 km. 24 short seismic cross lines and associated 3D blocks with single fold coverage were also recorded. The seismic survey of 3B/MVE (West) was performed to investigate the deep crustal structure and the transition zone between the Rhenohercynian and Saxothuringian units with high-fold near-vertical incidence vibroseis acquisition. The results were compared with the results from the surveys DEKORP 1 and DEKORP 2, running nearly parallel to the line 3B/MVE (West). Details of the 3B/MVE (West) experiment, its preliminary results and interpretations may be obtained from DEKORP Research Group (A) et al. (1994) and DEKORP Research Group (C) et al. (1994). The Technical Report of line 3B/MVE (West) gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The mainly NW-SE running DEKORP 3B/MVE (West) runs perpendicular to the Variscan strike direction and traverses the southern part of the Rhenohercynian unit with the Northern Phyllite Zone and the northern part of the Saxothuringian unit including the Mid-German Crystalline High. Starting in the Kellerwald the profile crosses the Hessian Depression, the Tertiary volcanic Rhoen Mountains and the Mesozoic of the Franconian Basin (DEKORP Research Group (C) et al., 1994). East of Staffelstein the profile turns to the east and ends on the Franconian Line, the southwestern boundary fault zone of the Bohemian Massif. The line 3B/MVE (West) is intersected by ten cross lines along the profile and by DEKORP 3A at its northwestern end. To the east the profile is extended by DEKORP 3B/MVE (East).

Description: The profile 1C was recorded in 1988 as part of the joint reflection venture DEKORP 1 of DEKORP (German Deep Seismic Reflection Program) and BELCORP (Belgian Continental Reflection Seismic Program) groups. The seismic survey of the ca. 75-km long line 1C was conducted to investigate the deep crustal structure of the western Rhenish Massif with high-fold near-vertical incidence vibroseis acquisition. The objectives of the experiment were to analyse deep Variscan and post-Variscan crustal structures in the region and to compare them with the results from the eastern Rhenish Massif gathered from the survey DEKORP 2N. The first results were presented by DEKORP Research Group (1991) and supplemented by many other researches. The Technical Report of line 1C gives detailed information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The Rhenohercynian Zone is a foreland fold-and-thrust belt cropping out in the Rhenish Massif which extends from the Ardennes to the Harz Mountains. This geological unit consists predominantly of Devonian and Lower Carboniferous rocks affected by very low-grade metamorphism (DEKORP Research Group, 1991). The survey 1C was carried out in the western part of the Rhenish Massif and intersects the Variscan main structures almost perpendicular. It stretches from the Mosel Syncline to the Saar-Nahe Basin (WNW-ESE) crossing the Devonian metamorphic rocks of the Hunsrueck Mountains, the Northern Phyllite Zone and the Hunsrueck Boundary Fault separating the Rhenohercynian and Saxothuringian Zones. In the northwest 1C joins line 1B which runs through the Hocheifel area. In the southeast the line continues with 9N running across the northern part of the Upper Rhine Graben.

Description: The 50 km long profile 1B was recorded in 1987 as part of the joint reflection venture DEKORP 1 of DEKORP (German Deep Seismic Reflection Program) and BELCORP (Belgian Continental Reflection Seismic Program) groups. It was surveyed to investigate the deep crustal structure of the western Rhenish Massif with high-fold near-vertical incidence vibroseis acquisition. The objectives of the experiment were to analyse deep Variscan and post-Variscan crustal structures in the region and to compare them with the results from the eastern Rhenish Massif gathered from the survey DEKORP 2N. The first results were presented by DEKORP Research Group (1990, 1991) and supplemented by many other researches. The Technical Report of line 1B gives detailed information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The Rhenohercynian Zone is a foreland fold-and-thrust belt cropping out in the Rhenish Massif which extends from the Ardennes to the Harz Mountains. This geological unit consists predominantly of Devonian and Lower Carboniferous rocks affected by very low-grade metamorphism (DEKORP Research Group, 1991). The survey 1B was carried out in the western part of the Rhenish Massif and trends nearly N-S starting in the western volcanic zone of the Eifel, the Tertiary Hoch Eifel Volcanic Field represented by alkali basalts and fractionated volcanics. The line also runs over a positiv magnetic anomaly, the Kelberg Magnetic High which is located on the southern flank of the East Eifel Main Anticline. Afterwards, 1B crosses the SE-dipping Siegen Main Thrust and ends in the Mosel Syncline, the northern border of the Hunsrueck Mountains (DEKORP Research Group, 1991). The profile joins line 1A in the north and continues to the southeast with line 1C.