ISSN:
1460-2695
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract— Metal and glass-bead peening treatments, widely used throughout the aircraft industry to enhance the fatigue performance of many steels and titanium alloys, are now being routinely applied to high-strength aluminium-alloy components. This paper describes the effects of peening on the fatigue life of 7050 aluminium alloy material, which is representative of alloys used for many components in modern military aircraft. Using simulated service loading, two proposed peening/re-peening procedures were evaluated and compared with both the original peened surface and a simple hand-polished surface. The results show that optimisation of peening parameters to reduce surface damage can provide a substantial improvement in fatigue life over both the original peening treatment and the polished surface treatment, however, poor control of peening procedures, or unnecessary “overpeening” can lead to a relatively poor fatigue life. For re-peened surfaces, a procedure incorporating a polishing step, designed to repair any damage from the severe peening applied initially, gave the best fatigue performance. Results are discussed in relation to the stability of the residual surface stresses under fatigue loading, the surface roughness, and the number and types of defects introduced by the peening treatments.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1460-2695.1994.tb00226.x
Permalink
