ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    Publication Date: 2016-08-31
    Description: A new gamma ray imager (GRI) is developed to probe the electron distribution function with 2D spatial resolution during runaway electron (RE) experiments at the DIII-D tokamak. The diagnostic is sensitive to 0.5–100 MeV gamma rays, allowing characterization of the RE distribution function evolution during RE growth and dissipation. The GRI consists of a lead “pinhole camera” mounted on the DIII-D midplane with 123 honeycombed tangential chords 20 cm wide that span the vessel interior. Up to 30 bismuth germanate (BGO) scintillation detectors capture RE bremsstrahlung radiation for Pulse Height Analysis (PHA) capable of discriminating up to 20 000 pulses per second. Digital signal processing routines combining shaping filters are performed during PHA to reject noise and record gamma ray energy. The GRI setup and PHA algorithms will be described and initial data from experiments will be presented. A synthetic diagnostic is developed to generate the gamma ray spectrum of a GRI channel given the plasma information and a prescribed distribution function. Magnetic reconstructions of the plasma are used to calculate the angle between every GRI sightline and orient and discriminate gamma rays emitted by a field-aligned RE distribution function.
    Print ISSN: 0034-6748
    Electronic ISSN: 1089-7623
    Topics: Electrical Engineering, Measurement and Control Technology , Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Publication Date: 2016-02-05
    Description: A chaotic hybrid dynamical system is introduced and its analytic solution is derived. The system is described as an unstable first order filter subject to occasional switching of a set point according to a feedback rule. The system qualitatively differs from other recently studied solvable chaotic hybrid systems in that the timing of the switching is regulated by an external clock. The chaotic analytic solution is an optimal waveform for communications in noise when a resistor-capacitor-integrate-and-dump filter is used as a receiver. As such, these results provide evidence in support of a recent conjecture that the optimal communication waveform for any stable infinite-impulse response filter is chaotic.
    Print ISSN: 1054-1500
    Electronic ISSN: 1089-7682
    Topics: Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Publication Date: 2014-08-15
    Description: Many current turbulence model simulations follow the accuracy-on-demand paradigm to partially resolve the flow field for achieving optimal compromise between accuracy and computational effort. In many such approaches, the sub-grid viscosity is modeled using kinetic energy and dissipation of unresolved scales. It is of scientific value and practical utility to characterize the resolved velocity fluctuations of such flow fields to: (i) establish if the computed fields exhibit the self-similarity and scaling properties consistent with physical turbulence and (ii) demonstrate if the flow field tends to the limit of fully-resolved turbulence in a prescribed and controlled manner. Toward this end, we begin by characterizing partially-resolved flow computations as direct numerical simulations of non-Newtonian fluids. This paradigm permits the extension of the Kolmogorov and finite Reynolds number scaling to the computed fields. The statistical behavior of the intermediate and smallest computed scales is then postulated as a function of the degree of resolution. Then it is demonstrated that the flow field in partially-averaged Navier-Stokes simulations behaves in accordance with the adapted Kolmogorov hypotheses in isotropic turbulence computations. Further, the statistics of sub-Kolmogorov fluctuations are demonstrated to be self-similar over a range of resolutions.
    Print ISSN: 1070-6631
    Electronic ISSN: 1089-7666
    Topics: Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Publication Date: 2016-04-14
    Description: A gamma ray camera is built for the DIII-D tokamak [J. Luxon, Nucl. Fusion 42 , 614 (2002)] that provides spatial localization and energy resolution of gamma flux by combining a lead pinhole camera with custom-built detectors and optimized viewing geometry. This diagnostic system is installed on the outer midplane of the tokamak such that its 123 collimated sightlines extend across the tokamak radius while also covering most of the vertical extent of the plasma volume. A set of 30 bismuth germanate detectors can be secured in any of the available sightlines, allowing for customizable coverage in experiments with runaway electrons in the energy range of 1–60 MeV. Commissioning of the gamma ray imager includes the quantification of electromagnetic noise sources in the tokamak machine hall and a measurement of the energy spectrum of background gamma radiation. First measurements of gamma rays coming from the plasma provide a suitable testbed for implementing pulse height analysis that provides the energy of detected gamma photons.
    Print ISSN: 0034-6748
    Electronic ISSN: 1089-7623
    Topics: Electrical Engineering, Measurement and Control Technology , Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Publication Date: 2016-10-18
    Description: The loss width of plasma in the WiPAL multi-dipole magnetic ring cusp [Cooper et al ., Phys. Plasmas 21 , 13505 (2014); Forest et al ., J. Plasma Phys. 81 , 345810501 (2015)] has been directly measured using a novel array of probes embedded in the insulating plasma limiters. The large plasma volume ( ∼ 10 m 3 ), small loss area associated with strong rare earth permanent magnets ( B o ∼ 2.23 kG at face), and large heating power ( ≤ 200 kW) produces a broad range of electron temperatures ( 2 〈 T e 〈 15  eV), ion temperatures ( 0.03 〈 T i 〈 2  eV), plasma densities ( 3 × 10 10 〈 n e 〈 2 × 10 12 cm −3 ), and ionization fractions ( 0.05 〈 n e / ( n e + n n ) 〈 1 ), in both argon and helium, all of which were accurately measured. This plasma regime, accessible with high magnetic fields, differs from previous devices: the cusp loss width is much larger than the Debye length and electron gyroradius and comparable to the collision length. Plasma parameters measured at the surface of ceramic limiter tiles covering the magnets and along radial chords in the cusp magnetic field indicate that electron density and temperature are nearly constant on magnetic field lines and that the mirror forces play little role in confining the plasma other than to constrict the loss area. Particle balance modeling is used to determine the cross field diffusion coefficient base on the measured losses to the limiters. The experimentally determined cross field diffusion coefficient (which determines the cusp loss width) is consistent with ambipolar diffusion across five orders of magnitude. The ambipolar diffusion across a given field line is set primarily by the electron-neutral collisions in the region where the magnetic field is the weakest, even though these plasmas can have ionization fractions near 1.
    Print ISSN: 1070-664X
    Electronic ISSN: 1089-7674
    Topics: Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Publication Date: 2014-07-25
    Description: We report the use of annular nano-voids in a metallic thin-film as programmable molecular sensors for surface-enhanced Raman spectroscopy (SERS). To date, research into these structures has focused on the exploration of their extraordinary optical transmission attributes. We now show that by using advanced lithography and simulation tools, we can generate a porous SERS material for molecular interrogation. Using ultra-thin annular structures, rather than simple circular holes, allows us to reduce both the volume and cross-sectional area of the void, maximizing the electric-field confinement, while, importantly for SERS, producing resonant conditions in the visible region of the spectrum. By comparing our annular films with conventional circular films with the same resonant frequency, we show a significant improvement in the efficiency of Raman scatter, creating stronger signals that also contain more spectral information.
    Print ISSN: 0003-6951
    Electronic ISSN: 1077-3118
    Topics: Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Publication Date: 2016-12-03
    Description: In this work, we analyze the use of optoelectronic tweezers (OETs) to manipulate 45  μ m diameter Sn 62 Pb 36 Ag 2 solder beads with light-induced dielectrophoresis force and we demonstrate high positioning accuracy. It was found that the positional deviation of the solder beads increases with the increase of the trap size. To clarify the underlying mechanism, simulations based on the integration of the Maxwell stress tensor were used to study the force profiles of OET traps with different sizes. It was found that the solder beads felt a 0.1 nN static friction or stiction force due to electrical forces pulling them towards the surface and that this force is not dependent on the size of the trap. The stiction limits the positioning accuracy; however, we show that by choosing a trap that is just larger than the solder bead sub-micron positional accuracy can be achieved.
    Print ISSN: 0003-6951
    Electronic ISSN: 1077-3118
    Topics: Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    ISSN: 1089-7623
    Source: AIP Digital Archive
    Topics: Physics , Electrical Engineering, Measurement and Control Technology
    Notes: In this paper, the options for the optical design for the UK-CRG beamline that is to be built at the ESRF are described here. This paper discusses how the options were narrowed to just two configurations and results are presented from ray-tracing simulations that were used to provide comparative flux outputs in order to assist in making the final choice. In conclusion, a discussion is presented of how a novel mirror concept, derived for one of the configurations, might have wider application. © 1995 American Institute of Physics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Publication Date: 2015-04-30
    Description: The magnetized liner inertial fusion concept [S. A. Slutz et al ., Phys. Plasmas 17 , 056303 (2010)] utilizes a magnetic field and laser heating to relax the pressure requirements of inertial confinement fusion. The first experiments to test the concept [M. R. Gomez et al ., Phys. Rev. Lett. 113 , 155003 (2014)] were conducted utilizing the 19 MA, 100 ns Z machine, the 2.5 kJ, 1 TW Z Beamlet laser, and the 10 T Applied B-field on Z system. Despite an estimated implosion velocity of only 70 km/s in these experiments, electron and ion temperatures at stagnation were as high as 3 keV, and thermonuclear deuterium-deuterium neutron yields up to 2 × 10 12 have been produced. X-ray emission from the fuel at stagnation had widths ranging from 50 to 110 μ m over a roughly 80% of the axial extent of the target (6–8 mm) and lasted approximately 2 ns. X-ray yields from these experiments are consistent with a stagnation density of the hot fuel equal to 0.2–0.4 g/cm 3 . In these experiments, up to 5 × 10 10 secondary deuterium-tritium neutrons were produced. Given that the areal density of the plasma was approximately 1–2 mg/cm 2 , this indicates the stagnation plasma was significantly magnetized, which is consistent with the anisotropy observed in the deuterium-tritium neutron spectra. Control experiments where the laser and/or magnetic field were not utilized failed to produce stagnation temperatures greater than 1 keV and primary deuterium-deuterium yields greater than 10 10 . An additional control experiment where the fuel contained a sufficient dopant fraction to substantially increase radiative losses also failed to produce a relevant stagnation temperature. The results of these experiments are consistent with a thermonuclear neutron source.
    Print ISSN: 1070-664X
    Electronic ISSN: 1089-7674
    Topics: Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Publication Date: 2015-05-15
    Description: By magnetizing the fusion fuel in inertial confinement fusion (ICF) systems, the required stagnation pressure and density can be relaxed dramatically. This happens because the magnetic field insulates the hot fuel from the cold pusher and traps the charged fusion burn products. This trapping allows the burn products to deposit their energy in the fuel, facilitating plasma self-heating. Here, we report on a comprehensive theory of this trapping in a cylindrical DD plasma magnetized with a purely axial magnetic field. Using this theory, we are able to show that the secondary fusion reactions can be used to infer the magnetic field-radius product, BR , during fusion burn. This parameter, not ρR , is the primary confinement parameter in magnetized ICF. Using this method, we analyze data from recent Magnetized Liner Inertial Fusion experiments conducted on the Z machine at Sandia National Laboratories. We show that in these experiments BR ≈ 0.34(+0.14/−0.06) MG cm, a ∼ 14× increase in BR from the initial value, and confirming that the DD-fusion tritons are magnetized at stagnation. This is the first experimental verification of charged burn product magnetization facilitated by compression of an initial seed magnetic flux.
    Print ISSN: 1070-664X
    Electronic ISSN: 1089-7674
    Topics: Physics
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...