ALBERT

Description: Petroleum systems located at passive continental margins received increasing attention in the last decade mainly because of deep- and ultra‐deep-water hydrocarbon exploration and production. The high risks associated with these settings originate mainly from the poor understanding of inherent geodynamic processes. The new priority program SAMPLE (South Atlantic Margin Processes and Links with onshore Evolution), established by the German Science Foundation in 2009 for a total duration of 6 years, addresses a number of open questions related to continental breakup and post‐breakup evolution of passive continental margins. 27 sub‐projects take advantage of the exceptional conditions of the South Atlantic as a prime “Geo‐archive.” The regional focus is set on the conjugate margins located east of Brazil and Argentina on one side and west of Angola, Namibia and South Africa on the other (Figure 1) as well as on the Walvis Ridge and the present‐day hotspot of Tristan da Cunha. The economic relevance of the program is demonstrated by support from several petroleum companies, but the main goal is research on fundamental processes behind the evolution of passive continental margins.

Description: New biostratigraphic zonations, core descriptions, sandstone petrography, facies analysis, and seismic information are compared with published detrital and bedrock geo- and thermochronology to build a Cenozoic paleogeographic reconstruction of the Andean retroarc region of Colombia, encompassing the ancestral Central Cordillera, Middle Magdalena Valley, Eastern Cordillera, and Llanos basin. We identify uplifted sediment source areas, provenance domains, depositional environments, and thickness changes to propose a refined paleogeographic evolution of eastern Colombia. We conclude that Cenozoic evolution of the northernmost Andes includes (1) a period of contractional deformation focused in the Central Cordillera and Middle Magdalena Valley that may have started by the Late Cretaceous, although thermochronological data points to maximum shortening and exhumation during the late Paleocene; (2) a period of slower deformation rates or even tectonic quiescence during the middle Eocene; and (3) a renewed phase of contractional deformation from the late Eocene to the Pleistocene/Holocene expressed in provenance, bedrock thermochronology, and increased subsidence rates in the Llanos foreland. The sedimentary response in the Llanos foreland basin is controlled by source area proximity, exhumation and shortening rates, relationships between accommodation and sediment supply, as well as potential paleoclimate forcing. This new reconstruction changes the picture of Cenozoic basin evolution offered by previous reconstructions, providing an updated chronology of deformation, which is tied to a more precise understanding of basin evolution.

Description: Quartz is the principal framework mineral in clastic sediment reservoirs. In a frontier basin with sparse wells, the source of quartz in sandstones may be a predictor of the availability of medium- to coarse-grained quartz sand from plutonic sources, likely to provide good reservoirs. The Scotian Basin, offshore eastern Canada, was used to test this hypothesis because of its well-understood provenance history and geographic variability in known medium- to coarse-grained reservoir sandstones. The sources of detrital quartz in fine-grained sandstones were determined using hot-cathode cathodoluminescence (CL), supplemented by other petrographic techniques. The CL color shift for different quartz types was calibrated against the CL properties of representative source rocks in the hinterland, because generalizations in the literature do not precisely match our basin-specific observations. Grain size of sandstone exerts a strong control over quartz type, with plutonic-hypabyssal quartz and high-grade metamorphic quartz more abundant in coarse-grained sandstones and low-grade metamorphic quartz more abundant in fine-grained sandstones. Nevertheless, the analysis of fine-grained sandstones shows that plutonic-hypabyssal quartz is more abundant in fine-grained sandstones of the Sable subbasin than in those of the Abenaki subbasin. The abundance of plutonic-hypabyssal quartz correlates with the abundance of medium- to coarse-grained sandstone reservoirs in the Sable subbasin. This study suggests that, in frontier basins, the abundance of plutonic-hypabyssal quartz in fine-grained sandstones can be used as an indicator of available medium- to coarse-grained sandstone reservoir.

Description: 〈span〉〈div〉ABSTRACT〈/div〉Shale gas in the Sichuan Basin and its periphery potentially plays an important role in the world shale gas industry. An understanding of remigration and leakage from continuous shale reservoirs is very important for shale gas exploration, especially in the Sichuan Basin and its periphery. The shale gas accumulation models that relate to remigration and leakage were developed within the Wufeng and Longmaxi black shales in the Jiaoshiba and the Youyang blocks. First, a tectono-sedimentary history of the Wufeng and Longmaxi black shales in the Sichuan Basin and its periphery was developed based on the published literature. The history exhibits a continuous distribution of high-quality Wufeng and Longmaxi black shale, which is the foundation of the shale gas formation. Second, the shale gas remigration–accumulation model in the anticlines was clarified by using data collected from the shale gas fields in Jiaoshiba block. The shale gas model for the Jiaoshiba block was developed on the basis of a continuous shale reservoir distribution, differentiated structural deformation, and a gas self-sealed system. Third, the shale gas fault failure leakage model in the fault blocks and the erosion model in the residual areas were revealed based on the shale reservoir and shale gas content heterogeneity in the Youyang block. These two models were validated by available data including 13 two-dimensional seismic lines and 2 shale gas exploration vertical wells in the Youyang block. Shale gas areas with high gas resource and gas production rates in the anticlines were defined by the remigration–accumulation model. The fault failure leakage model was used to find shale gas with limited commercial potential, whereas commercial shale gas was largely lacking according to the erosion residual model. The study on remigration and leakage from continuous shale reservoirs in the Sichuan Basin and its periphery can be used to better understand and improve the exploration efforts based on resource preservation.〈/span〉

Description: A reliable rock classification in a carbonate reservoir should take into account petrophysical, compositional, and elastic properties of the formation. However, depth-by-depth assessment of these properties is challenging because of the complex pore geometries and significant heterogeneity caused by diagenesis. Common rock-classification methods in carbonate formations do not incorporate the impact of both depositional and diagenetic modifications on rock properties. Furthermore, elastic properties, which control fracture propagation and the conductivity of fracture under closure stress, commonly are not accounted for in conventional rock-classification techniques. We apply an integrated rock-classification technique, based on both depositional and diagenetic effects that can ultimately enhance (1) assessment of petrophysical properties, (2) selection of candidates for fracture treatment, and (3) production in carbonate reservoirs. We apply the conductive and the elastic self-consistent approximation theories to estimate depth-by-depth volumetric concentration of interparticle (e.g., interconnected pore space) and intraparticle (e.g., vugs) pores, as well as elastic bulk and shear moduli, in the formation. This process takes into account the impact of shape and volumetric concentrations of rock components on electrical conductivity and elastic properties. We document a successful application of the introduced technique in two wells in the upper Leonardian carbonate interval of Veterans field in west Texas. The identified rock types were verified using thin-section images and core samples. We estimate elastic moduli as well as interparticle porosity with average relative errors of approximately 8% and 10% compared to the core measurements, respectively. Furthermore, the well-log-based estimates of permeability and water saturation are improved by approximately 50% and 20%, respectively, after considering rock classification. Finally, we explain that the fracture propagation failure in the second well (i.e., well B) could be the result of relatively lower Young’s modulus in the rock class corresponding to fracture locations.

Description: The northern Flinders Ranges and eastern Willouran Ranges, South Australia, expose Neoproterozoic salt diapirs, salt sheets, and associated growth strata that provide a natural laboratory for testing and refining models of allochthonous salt initiation and emplacement. The diapiric Callanna Group (~850–800 Ma) comprises a lithologically diverse assemblage of brecciated rocks that were originally interbedded with evaporites that are now absent. Using stereonet analysis to derive three-dimensional information from two-dimensional outcrops of stratal geometries flanking salt diapirs and beneath salt sheets, we evaluate 10 examples of the transition from steep diapirs to salt sheets, 3 of ramp-to-flat geometries, and 2 of flat-to-ramp transitions. Stratal geometries adjacent to feeder diapirs range from a minibasin-scale megaflap to halokinetic drape folds to high-angle truncations and appear to have no relationship to subsequent allochthonous salt development. In all cases, the transition from steep diapirs to salt sheets is abrupt and involved piston-like breakthrough of thin roof strata, which permitted salt to flow laterally. We suggest two models to explain the transition from steep diapirs to subhorizontal salt: (1) salt-top breakout, where salt rise occurs inboard of the salt flank, thereby preserving part of the roof strata beneath the sheet; and (2) salt-edge breakout, where rise occurs at the edge of the diapir with no roof preservation. Lateral emplacement of salt sheets is dependent on the interplay between the rate of salt supply to the front of the sheet and the sediment-accumulation rate. When the ratio of salt-supply rate to sediment-accumulation rate is high to moderate, thrust advance produces base-salt flats and truncation ramps, respectively. Halokinetic folds are absent because the thrust emerges at the base of the sea-floor scarp and mass-transport complexes are rare as a result of relatively low scarp relief. If the ratio is low, pinned inflation leads to drape folding of the top salt and cover into a fold ramp, with occasional slumping of the sheet and its roof and further breakout on thrust or reverse faults. In the shallow-water depositional environments of South Australia, lateral emplacement of salt sheets occurred through some combination of thrust advance, extrusive advance, and open-toed advance, with no evidence for subsalt thrust imbricates, shear zones, or continuous rubble zones. In deep-water environments, such as the northern Gulf of Mexico, thrust imbricates and rubble zones, which represent slumped carapace, are more common. The presence of slumped carapace is caused primarily by higher topographic relief related to thicker hemipelagic roofs, a lack of dissolution, and gravity-driven transport of overburden strata to the toes of large canopies.

Description: The exploitation of hydrocarbon reserves in naturally fractured reservoirs composed of different types of rocks has drawn considerable attention from the fracture characterization research community because of the importance of fractures to the prediction of fluid flow. One of the most common methods for rapidly analyzing fracture features is the scanline technique, which provides an estimate of fracture density and frequency. Despite the confidence provided by the systematic use of this method, errors and uncertainties caused by sampling biases exist. The problems caused by these uncertainties can detrimentally affect the construction of a computational model due to misleading trends. This study evaluated the uncertainty caused by sampling biases in the scanline data of opening-mode fractures in outcrops of naturally fractured Aptian laminated limestone from the Crato Formation, Araripe Basin, northeastern Brazil. The Monte Carlo method was chosen to introduce random values into the sampled values, which enabled us to verify the importance of errors in the accuracy of the method of representing the fracture network. In this study, errors and uncertainties were grouped into one parameter, termed the coefficient of uncertainty, which was defined as the ratio between the uncertainties, created by the errors and artifacts introduced artificially, and the original scanline data. The propagation of errors and uncertainties in the scanline data to the coefficients of the corresponding power law were determined. This evaluation can be applied in the construction of more reliable geomechanical models using analog geological models for naturally fractured reservoirs.

Description: With increasing exploration maturity, reserve growth is becoming an increasingly important component of petroleum resources worldwide. The U.S. Geological Survey has studied reserve-growth models for United States and foreign petroliferous basins for nearly two decades and has developed several reserve-growth forecast methodologies. However, no reserve-growth research has been carried out on Chinese basins, and it is not clear how much reserve growth contributes to the total petroleum resources of China. This paper uses the Bohai Bay basin, the largest petroleum basin in China, as a case study of reserve growth for Chinese basins. Of the 278 oil fields in the basin, 168 fields are chosen to develop the model using the modified Arrington method, and 121 fields are selected to build the model using the group-growth method. The results show that the cumulative growth factors (CGFs) calculated by these two methods are 2.41 and 2.44, respectively, in the 37-yr period after the first significant reserve-reporting year in the Bohai Bay basin. Reserve growth for global basins could be classified into four models, that is, the lowest growth (CGF 〈 1.5), low-growth (CGF 1.5–2.5), medium-growth (CGF 2.5–4.5) and high-growth (CGF 〉 4.5) models in light of their CGFs. The low-growth model fits for the oil fields in the Bohai Bay basin.

Description: Some recent publications promote one-run, open-system pyrolysis experiments using a single heating rate (ramp) and fixed frequency factor to determine the petroleum generation kinetics of source-rock samples because, compared to multiple-ramp experiments, the method is faster, less expensive, and presumably yields similar results. Some one-ramp pyrolysis experiments yield kinetic results similar to those from multiple-ramp experiments. However, our data for 52 worldwide source rocks containing types I, II, IIS, II/III, and III kerogen illustrate that one-ramp kinetics introduce the potential for significant error that can be avoided by using high-quality kinetic measurements and multiple-ramp experiments in which the frequency factor is optimized by the kinetic software rather than fixed at some universal value. The data show that kinetic modeling based on a discrete activation energy distribution and three different pyrolysis temperature ramps closely approximates that determined from additional runs, provided the three ramps span an appropriate range of heating rates. For some source rocks containing well-preserved kerogen and having narrow activation energy distributions, both single- and multiple-ramp discrete models are insufficient, and nucleation-growth models are necessary. Instrument design, thermocouple size or orientation, and sample weight likely influence the acceptable upper limit of pyrolysis heating rate. Caution is needed for ramps of 30–50°C/min, which can cause temperature errors due to impaired heat transfer between the oven, sample, and thermocouple. Compound volatility may inhibit pyrolyzate yield at the lowest heating rates, depending on the effectiveness of the gas sweep. We recommend at least three pyrolysis ramps that span at least a 20-fold variation of comparatively lower rates, such as 1, 5, and 25°C/min. The product of heating rate and sample size should not exceed ~100 mg °C/min. Our results do not address the more fundamental questions of whether kinetic models based on multiple-ramp open-system pyrolysis are mechanistically appropriate for use in basin simulators or whether petroleum migration through the kerogen network, rather than cracking of organic matter, represents the rate-limiting step in expulsion.

Description: This study estimates reservoir quality and free-gas storage capacity of the Barnett Shale in the main natural-gas producing area of the Fort Worth basin by mapping log-derived thickness, porosity, and porosity-feet. In the Barnett Shale, the density porosity (DPHI) log curve is a very useful tool to quantitatively assess shale gas resources, and gamma-ray (GR) and neutron porosity log curves are important factors in identifying the shale gas reservoir. The key data were digital logs from 146 wells selected based on the availability of GR and density log curves, log quality, and good spatial distribution. The Barnett Shale pay zone was determined on the basis of (1) DPHI 〉5%, (2) high GR values (commonly 〉~90 API units), (3) no significant intercalated carbonate-rich beds, and (4) individual pay zones being thick enough to be commercially successful for the current design of horizontal wells. In the study area, the Barnett Shale pay zone varies from about 165 ft (50 m) to 420 ft (128 m) in thickness (H). Average DPHI values of individual wells for the pay zone vary from 8.5 to 14.0%. Porosity-feet maps of the pay zone show that areas of high DPHI-H values coincide with areas of high natural gas production, indicating that log-derived porosity-feet maps are a good method for evaluating reservoir quality and assessing natural gas resource in the Barnett Shale play. A limitation to this method is shown in the northwestern corner of the study area, which is located in the liquids-rich window with lower thermal maturity.