ALBERT

Description: The 86 fields and discoveries in the central Mississippi Canyon, Atwater Valley, western DeSoto Canyon, and Lloyd Ridge protraction areas are summarized with production characteristics and representative seismic profiles and wire-line logs. Three trap styles are recognized: four-way closure, three-way closure, and stratigraphic. The reservoirs in nearly all of the fields are Neogene deep-water sandstones; four are in Upper Jurassic eolian sandstones. Development facilities include a variety of floating platforms and production units and subsea tiebacks.

Description: A megaflap, or an overturned, folded, sedimentary-basin edge, is a classic feature of salt-controlled basins, formed during the inception of salt allochthony. To illustrate the relative importance of the balance between salt and sediment inputs, basin rheology, and tectonism resulting from basin interactions in the development of megaflaps, a set of analog experiments were performed in a computed tomography scanner. Sediments are modeled using both granular material and a mix of granular and viscous material and salt as purely viscous material. Uneven sedimentary loading and associated salt flow localize primary minibasins, which then migrate and expand laterally until sufficient thickness is reached to pin the downbuilding phase. The encasement of minibasins into the mother-salt layer is followed by secondary minibasin development above the canopy, the inception and localization of which appear to be more locally controlled by the primary salt feeders, salt glaciers, and canopies. Enhanced salt extrusion along basin edges is responsible for (1) classic halokinetic sequences, (2) major wedging and basin-edge erosion, and (3) basin-edge backfolding onto the basin centers, forming megaflaps. Basin interactions during differential subsidence and secondary minibasin development above the allochthonous salt canopy result in the formation of salt welds and tectonic deformation at basin boundaries, including broken and transported basin edges. The major controlling factor in megaflap development is salt allochthony, which allows the local salt extrusion rate to be higher than the sedimentation rate. Enhanced allochthony is the result of enhanced pressure related to local salt stock squeezing, regional shortening, or basin tilting.

Description: Analysis of fracture systems in subsurface structures is limited by the amount and uncertainty of available data. With the aim of analyzing the distribution of fracture systems, we studied surface structures as analogs for oil fields in the fractured reservoirs of the Llanos foothills of Colombia. Here, we document the presence of four widespread fracture systems whose distribution is related to fold geometry and folding mechanism. At surface, in the Tierranegra and Silbadero anticlines, the principal fracture systems are symmetrical with respect to northeast- and northwest-trending fold axes, showing higher fracture intensities in the forelimbs of the structures. In the Guavio anticline, higher fracture intensities are located in the backlimb, with principal east–west and northwest–southeast directions. In contrast, we document northeast–southwest fractures near the hinge zones in the adjacent synclines. This distribution suggests that in the Guavio anticline, fractures respond to movement of the hanging-wall above a ramp, consistent with a fault-bend-fold model. Whereas, in the Tierranegra and Silbadero anticlines, fractures respond to limb rotation and hinge migration consistent with detachment fold models. Comparing these with subsurface structures, we identified that El Morro anticline has fracture distributions like those in the Tierranegra and Silbadero anticlines, but have higher fracture intensities. In the case of the Cusiana Structure, fracture intensities are higher in the crest but not in the limbs, and intensities differ from the ones found in the Guavio anticline, showing that these structures are not appropriate analogs. The results show how fracture distribution depends on structural position and fold evolution, and is controlled in part by folding mechanism. This suggests that models based on Holocene fold geometry cannot accurately predict the observed fracture distributions and should not be used to construct discrete fracture network models. Instead, the patterns we describe can be used as a guide for similar structures. Our work illustrates the possibility of having different fracture patterns and fracture abundances in adjacent folds in the same fold-thrust belt.

Description: Characterization of oil shale kerogen and organic residues remaining in postpyrolysis spent shale is critical to the understanding of the oil generation process and approaches to dealing with issues related to spent shale. The chemical structure of organic matter in raw oil shale and spent shale samples was examined in this study using advanced solid-state 13 C nuclear magnetic resonance (NMR) spectroscopy. Oil shale was collected from Mahogany zone outcrops in the Piceance Basin. Five samples were analyzed: (1) raw oil shale, (2) isolated kerogen, (3) oil shale extracted with chloroform, (4) oil shale retorted in an open system at 500°C to mimic surface retorting, and (5) oil shale retorted in a closed system at 360°C to simulate in-situ retorting. The NMR methods applied included quantitative direct polarization with magic-angle spinning at 13 kHz, cross polarization with total sideband suppression, dipolar dephasing, CH n selection, 13 C chemical shift anisotropy filtering, and 1 H- 13 C long-range recoupled dipolar dephasing. The NMR results showed that, relative to the raw oil shale, (1) bitumen extraction and kerogen isolation by demineralization removed some oxygen-containing and alkyl moieties; (2) unpyrolyzed samples had low aromatic condensation; (3) oil shale pyrolysis removed aliphatic moieties, leaving behind residues enriched in aromatic carbon; and (4) oil shale retorted in an open system at 500°C contained larger aromatic clusters and more protonated aromatic moieties than oil shale retorted in a closed system at 360°C, which contained more total aromatic carbon with a wide range of cluster sizes.

Description: A normal-fault network from Milne Point, Alaska, is investigated focusing on characterizing geometry, displacement, strain, and different fault interactions. The network, constrained from three-dimensional seismic reflection data, comprises two generations of faults: Cenozoic north-northeast–trending faults and Jurassic west-northwest–trending faults, which highly compartmentalize Upper Triassic to Lower Cretaceous reservoirs. The west-northwest–trending faults are influenced by a similarly oriented underlying structural grain. This influence is characterized by increases in throw on several faults, strain localization, reorientation of faults and an increase in linkage maturity. Reconstructing fault plane geometries and mapping spatial variations in throw identified key characteristic features in their interactions and reactivation of pre-existing structures. Faults are divided into isolated, abutting, and splaying faults. Isolated faults exhibit a range of displacement profiles depending on the degree of restriction at fault tips. Fault splays accommodate step-like decreases in throw along larger main faults with a throw maximum at the intersection with the main fault. Throw profiles of abutting faults are divided into two groups: early stage abutting faults with throw minima at both the isolated and abutting tips, and developed abutting faults with throw maxima near the abutting tip. Developed abutting faults accumulate throw after initial abutment, locally reactivating and transferring throw onto the pre-existing fault. Two abutting faults can link kinematically by reactivating a segment of the pre-existing fault forming a trailing fault. The motion sense of the trailing fault can be synthetic or antithetic to the reactivated pre-existing fault, producing increases or decreases in the throw of the pre-existing fault, respectively.

Description: Petroleum systems located at passive continental margins received increasing attention in the last decade mainly because of deep- and ultra‐deep-water hydrocarbon exploration and production. The high risks associated with these settings originate mainly from the poor understanding of inherent geodynamic processes. The new priority program SAMPLE (South Atlantic Margin Processes and Links with onshore Evolution), established by the German Science Foundation in 2009 for a total duration of 6 years, addresses a number of open questions related to continental breakup and post‐breakup evolution of passive continental margins. 27 sub‐projects take advantage of the exceptional conditions of the South Atlantic as a prime “Geo‐archive.” The regional focus is set on the conjugate margins located east of Brazil and Argentina on one side and west of Angola, Namibia and South Africa on the other (Figure 1) as well as on the Walvis Ridge and the present‐day hotspot of Tristan da Cunha. The economic relevance of the program is demonstrated by support from several petroleum companies, but the main goal is research on fundamental processes behind the evolution of passive continental margins.

Description: The three-dimensional (3-D) geometry of fractures and fault-related dolomite is difficult to access with classical subsurface prospection tools. Therefore, we have investigated an outcrop to improve the subsurface prediction for complex dolomite bodies. This outcrop is located in the Etoile massif (southeastern France) within a fault-bend anticline. The sedimentary units are of Upper Triassic to lower Barremian age. The fold results from the Pyreneo-Provençal shortening during the Late Cretaceous to the Eocene. The anticline hosts three types of dolomite bodies: (1a) massive dolomite of middle to late Oxfordian age, (1b) syndepositional stratabound dolomite of Tithonian age, and (2) isolated dolomite bodies associated with fractures and faults. Large-scale geometries of fault-related dolomite bodies have been modeled in 3-D. The 3-D geometries of these bodies show diapir-, finger- and wall-like structures. These bodies are located close to the main thrusts, in strata of middle Oxfordian to early Barremian age and are linked to the compressive fold-bending phase during the Late Cretaceous. Fault-related dolomitization occurred because of magnesium removal from the hydraulic brecciation and the pressure solution of type 1 dolomite with overpressured fluids. These fluids flushed upward along the main thrust and laterally by following the reservoir property contrasts in the host rocks. Fault-related dolomite bodies are either spread far apart from faults in grainy limestones with good initial reservoir properties or are restricted to fault vicinity in muddy limestones with poor initial reservoir properties. The study of the structural and stratigraphic framework was essential in the understanding of the dolomitization process.

Description: Accurate definition of structural style in subsurface interpretation is critically important for understanding the deformation history of fold-and-thrust belts, as well as assessing the petroleum prospectivity of structural traps. Using two- and three-dimensional seismic reflection surveys, well data, field mapping, forward models, and balanced cross sections, we describe the structural styles across the actively deforming southern Junggar fold-and-thrust belt in northwestern China, a basin undergoing petroleum exploration and development operations. Subsurface interpretations indicate several folds in the basin overlie Jurassic normal faults that were tectonically inverted in the Late Jurassic to Early Cretaceous. Following inversion, multiple detachment levels propagated northward from the Tian Shan and formed a series of imbricated fault-related folds. The most prominent fold trend in southern Junggar consists of the Tugulu, Manas, and Huoerguosi anticlines, which trap hydrocarbons in clastic Eocene reservoirs. These structures exhibit complex internal geometries, with coeval forethrusts and backthrusts forming imbricated structural wedges. In the latest stages of deformation, and continuing at present, the uppermost thrust sheet, the Southern Junggar Thrust (SJT), truncated the backlimbs of these structural traps, implying the SJT is a tectonically active, out-of-sequence thrust. From these interpretations, we present a model for how the southern Junggar fold-and-thrust belt developed from Jurassic to present. Moreover, we detail how fold growth, fault activity, and structural style affected charge histories, trap formation, and reservoir compartmentalization. Our results have direct implications for assessment of the southern Junggar petroleum system as well as other complex fold-and-thrust belts.

Description: The exploitation of hydrocarbon reserves in naturally fractured reservoirs composed of different types of rocks has drawn considerable attention from the fracture characterization research community because of the importance of fractures to the prediction of fluid flow. One of the most common methods for rapidly analyzing fracture features is the scanline technique, which provides an estimate of fracture density and frequency. Despite the confidence provided by the systematic use of this method, errors and uncertainties caused by sampling biases exist. The problems caused by these uncertainties can detrimentally affect the construction of a computational model due to misleading trends. This study evaluated the uncertainty caused by sampling biases in the scanline data of opening-mode fractures in outcrops of naturally fractured Aptian laminated limestone from the Crato Formation, Araripe Basin, northeastern Brazil. The Monte Carlo method was chosen to introduce random values into the sampled values, which enabled us to verify the importance of errors in the accuracy of the method of representing the fracture network. In this study, errors and uncertainties were grouped into one parameter, termed the coefficient of uncertainty, which was defined as the ratio between the uncertainties, created by the errors and artifacts introduced artificially, and the original scanline data. The propagation of errors and uncertainties in the scanline data to the coefficients of the corresponding power law were determined. This evaluation can be applied in the construction of more reliable geomechanical models using analog geological models for naturally fractured reservoirs.

Description: The petroleum trap for the Athabasca oil sands has remained elusive because it was destroyed by flexural loading of the Western Canada Sedimentary Basin during the Late Cretaceous and Paleocene. The original trap extent is preserved because the oil was biodegraded to immobile bitumen as the trap was being charged during the Late Cretaceous. Using well and outcrop data, it is possible to reconstruct the Cretaceous overburden horizons beyond the limit of present-day erosion. Sequential restoration of the reconstructed horizons reveals a megatrap at the top of the Wabiskaw-McMurray reservoir in the Athabasca area at 84 Ma (late Santonian). The megatrap is a four-way anticline with dimensions 285 x 125 km (177 x 78 mi) and maximum amplitude of 60 m (197 ft). The southeastern margin of the anticline shows good conformance to the bitumen edge for 140 km (87 mi). To the northeast of the anticline, bitumen is present in a shallower trap domain in what is interpreted to be an onlap trap onto the Canadian Shield; leakage along the onlap edge is indicated by tarry bitumen outliers preserved in basement rocks farther to the northeast. Peripheral trap domains that lie below the paleospillpoint, in northern, southern, and southwestern Athabasca, and Wabasca, are interpreted to represent a late charge of oil that was trapped by bitumen already emplaced in the anticline and the northeastern onlap trap. This is consistent with kimberlite intrusions containing live bitumen, which indicate that the northern trap domain was charged not before 78 Ma. The trap restoration has been tested using bitumen-water contact well picks. The restored picks fall into groups that are consistent both with the trap domains determined from the top reservoir restoration and the conceptual charge model in which the four-way anticline was filled first, followed by the northeastern onlap trap, and then the peripheral trap domains.