ALBERT

Description: Many blueschists and eclogites are inferred to have formed from oceanic basalts in subducted slabs. Knowledge of their elastic behaviour is essential for reconstructing the internal structure of subduction zones. The Cycladic Blueschist Unit, exposed on Syros Island (Greece), contains rocks belonging to an exhumed Tertiary subduction complex. They were possibly part of a subduction channel, a shear zone above the subducting slab in which exhumation is possible during subduction. Intense plastic deformation, forming crystallographic preferred orientations (CPO), accompanied blueschist and eclogite metamorphism. CPO of the constituent minerals in the collected samples was determined by time-of-flight neutron diffraction. Two samples are foliated fine-grained blueschists with strong CPO, rich in glaucophane, zoisite and phengite. Two coarser-grained eclogite samples rich in omphacite and clinozoisite, or glaucophane, have weaker CPO. Vp and Vs anisotropies were computed from the orientation distribution function and single-crystal elastic constants. All samples show velocity maxima parallel to the mineral lineation, and minima normal to the foliation, providing important constraints on orientations of seismic anisotropy in subduction channels. Vp anisotropies are up to three times higher (6.5-12%) in the blueschists than in the eclogites (3-4%), pointing to a potentially important lithological control of elastic anisotropy in subducted oceanic crust.

Description: Low-angle normal faults play a prominent role in discussions about fault strength, as they require significant weakening to remain active at low angles. The submerged Moresby Seamount detachment (MSD) is arguably the best exposed active low-angle detachment worldwide. We analyzed dredged MSD protoliths, cataclasites and mylonites to investigate deformation mechanisms and fault-weakening processes. Deformation is accompanied by important syntectonic, fluid-induced mass transfer, controlling the rheological behavior of the MSD. While the mafic protolith behaves brittlely at the onset of deformation, the metasomatic mineralogical and chemical changes cause a transition to plastic flow as the rock is progressively exhumed. Immobile elements provide a reference frame for total material gains and losses. Si, Ca and K are syntectonically enriched, while Fe, Ti, Mg, and Al are depleted. Mass increase is about 10% in the cataclasites and about 48% in the mylonites. Main mechanism is syntectonic veining, causing enrichment in calcite and quartz, thus making the mylonites capable to flow plastically. Minimum time-integrated fluid flux is calculated as 3 × 105 m3 m−2, indicating that the MSD is an important fluid conduit. The fluids have a deep crustal source, a bottom water temperature and turbidity anomaly suggests that the hydrothermal system is still active. Syntectonic veining in fault rocks and recent seismic activity both suggest that the MSD is intermittently brittle, implying a brittle-plastic transition at unusually high temperature and low differential stress. We conclude that fault zone metasomatism is crucial in forming weak detachments at passive margins, and may be a prerequisite for successful crustal breakup.

Description: Seafloor seepage of hydrocarbon-bearing fluids has been identified in a number of marine forearcs. However, temporal variations in seep activity and the structural and tectonic parameters that control the seepage often remain poorly constrained. Subduction-zone earthquakes for example, are often discussed to trigger seafloor seepage but causal links that go beyond theoretical considerations have not yet been fully established. This is mainly due to the inaccessibility of offshore epicentral areas, the infrequent occurrence of large earthquakes, and challenges associated with offshore monitoring of seepage over large areas and sufficient time periods. Here, we report visual, geochemical, geophysical, and modelling results and observations from the Concepción Methane Seep Area (offshore Central Chile) located in the rupture area of the 2010 Mw. 8.8 Maule earthquake. High methane concentrations in the oceanic water column and a shallow sub-bottom depth of sulfate penetration indicate active methane seepage. The stable carbon isotope signature of the methane and hydrocarbon composition of the released gas indicate a mixture of shallow-sourced biogenic gas and a deeper sourced thermogenic component. Pristine fissures and fractures observed at the seafloor together with seismically imaged large faults in the marine forearc may represent effective pathways for methane migration. Upper-plate fault activity with hydraulic fracturing and dilation is in line with increased normal Coulomb stress during large plate-boundary earthquakes, as exemplarily modelled for the 2010 earthquake. On a global perspective our results point out the possible role of recurring large subduction-zone earthquakes in driving hydrocarbon seepage from marine forearcs over long timescales.

Description: Nineteen whole-round core samples from the Nankai accretionary prism (IODP Expeditions 315, 316, and 333) from a depth range of 28–128 m below sea floor were experimentally deformed in a triaxial cell under consolidated and undrained conditions at confining pressures of 400–1000 kPa, room temperature, axial displacement rates of 0.01–9.0 mm/min, and up to axially compressive strains of ∼64%. Despite great similarities in composition and grain size distribution of the silty clay samples, two distinct “rheological groups” are distinguished: The first group shows deviatoric peak stress after only a few percent of compressional strain (〈10%) and a continuous stress decrease after peak conditions. Simultaneous to this decrease is a pore pressure increase indicating contractant behavior characteristic of structurally weak material. The second sample group weakens only moderately at a much higher strength level after significantly higher strain (〉10%), or does not weaken at all. This is characteristic of structurally strong material. The strong samples tend to be overconsolidated and are all from the drillsites at the accretionary prism toe, while the weak and normally consolidated samples come from the immediate hanging wall of a megasplay fault further upslope. Sediments from the incoming plate are also structurally weak. The observed differences in mechanical behavior may hold a key for understanding strain localization and brittle faulting within the uniform silty and clayey sedimentary sequence of the Nankai accretionary prism.

Description: Acoustic velocities were measured during triaxial deformation tests of silty clay and clayey silt core samples from the Nankai subduction zone (Integrated Ocean Drilling Program Expeditions 315, 316, and 333). We provide a new data set, continuously measured during pressure increase and subsequent axial deformation. A new data processing method was developed using seismic time series analysis. Compressional wave velocities (V-p) range between about 1450 and 2200 m/s, and shear wave velocities (V-s) range between about 150 and 800 m/s. V-p slightly increases with rising effective confining pressure and effective axial stress. Samples from the accretionary prism toe show the highest Vp, while fore-arc slope sediments show lower Vp. Samples from the incoming plate, slightly richer in clay minerals, have the lowest values for V-p. V-s increases with higher effective confining pressures and effective axial stress, irrespective of composition and tectonic setting. Shear and bulk moduli are between 0.2 and 1.3 GPa, and 3.85 and 8.41 GPa, respectively. Elastic moduli of samples from the accretionary prism toe and the footwall of the megasplay fault (1.50 and 3.98 GPa) are higher than those from the hanging wall and incoming plate (0.59 and 0.88 GPa). This allows differentiation between normal and overconsolidated sediments. The data show that in a tectonosedimentary environment of only subtle compositional differences, acoustic properties can be used to differentiate between stronger (accretionary prism toe) and weaker (fore-arc slope, incoming plate) sediments. Especially V-p/V-s ratios may be instrumental in detecting zones of low effective stress and thus high pore fluid pressure

Description: We present the first comprehensive study of mass wasting processes in the continental slope of a convergent margin of a subduction zone where tectonic processes are dominated by subduction erosion. We have used multibeam bathymetry along ∼1300 km of the Middle America Trench of the Central America Subduction Zone and deep-towed side-scan sonar data. We found abundant evidence of large-scale slope failures that were mostly previously unmapped. The features are classified into a variety of slope failure types, creating an inventory of 147 slope failure structures. Their type distribution and abundance define a segmentation of the continental slope in six sectors. The segmentation in slope stability processes does not appear to be related to slope preconditioning due to changes in physical properties of sediment, presence/absence of gas hydrates, or apparent changes in the hydrogeological system. The segmentation appears to be better explained by changes in slope preconditioning due to variations in tectonic processes. The region is an optimal setting to study how tectonic processes related to variations in intensity of subduction erosion and changes in relief of the underthrusting plate affect mass wasting processes of the continental slope. The largest slope failures occur offshore Costa Rica. There, subducting ridges and seamounts produce failures with up to hundreds of meters high headwalls, with detachment planes that penetrate deep into the continental margin, in some cases reaching the plate boundary. Offshore northern Costa Rica a smooth oceanic seafloor underthrusts the least disturbed continental slope. Offshore Nicaragua, the ocean plate is ornamented with smaller seamounts and horst and graben topography of variable intensity. Here mass wasting structures are numerous and comparatively smaller, but when combined, they affect a large part of the margin segment. Farther north, offshore El Salvador and Guatemala the downgoing plate has no large seamounts but well-defined horst and graben topography. Off El Salvador slope failure is least developed and mainly occurs in the uppermost continental slope at canyon walls. Off Guatemala mass wasting is abundant and possibly related to normal faulting across the slope. Collapse in the wake of subducting ocean plate topography is a likely failure trigger of slumps. Rapid oversteepening above subducting relief may trigger translational slides in the middle Nicaraguan upper Costa Rican slope. Earthquake shaking may be a trigger, but we interpret that slope failure rate is lower than recurrence time of large earthquakes in the region. Generally, our analysis indicates that the importance of mass wasting processes in the evolution of margins dominated by subduction erosion and its role in sediment dynamics may have been previously underestimated.

Description: Key Points: Multibeam bathymetric and seismic reflection data image the structure of the North Chilean marine forearc and the oceanic Nazca plate The structural character and tectonic configuration of the offshore forearc and the oceanic plate change significantly along the margin The derived pattern of permanent deformation may hold information for studying seismicity or other types of short term deformation New multibeam bathymetry allows an unprecedented view of the tectonic regime and its along‐strike heterogeneity of the North Chilean marine forearc and the oceanic Nazca Plate between 19‐22.75°S. Combining bathymetric and backscatter information from the multibeam data with sub‐bottom profiler and published and previously unpublished legacy seismic reflection lines, we derive a tectonic map. The new map reveals a middle and upper‐slope configuration dominated by pervasive extensional faulting, with some faults outlining a 〉500 km long ridge that may represent the remnants of a Jurassic or pre‐Jurassic magmatic arc. Lower slope deformation is more variable and includes slope‐failures, normal faulting, re‐entrant embayments, and NW‐SE trending anticlines and synclines. This complex pattern likely results from the combination of subducting lower‐plate topography, gravitational forearc collapse, and the accumulation of permanent deformation over multiple earthquake cycles. We find little evidence for widespread fluid seepage despite a highly faulted upper‐plate. An explanation could be a lack of fluid sources due to the sediment starved nature of the trench and most of the upper‐plate in vicinity of the hyper‐arid Atacama Desert. Changes in forearc architecture partly correlate to structural variations of the oceanic Nazca Plate, which is dominated by the spreading‐related abyssal hill fabric and is regionally overprinted by the Iquique Ridge. The ridge collides with the forearc around 20‐21°S. South of the ridge‐forearc intersection, bending‐related horst‐and‐grabens result in vertical seafloor offsets of hundreds of meters. To the north, plate‐bending is accommodated by reactivation of the paleo‐spreading fabric and new horst‐and‐grabens do not develop.

Description: Mediterranean tectonics since the Lower Cretaceous has been characterized by a multi‐phase subduction and collision history with temporally and spatially‐variable, small‐scale plate configurations. A new shear‐wave velocity model of the Mediterranean upper mantle (MeRE2020), constrained by a very large set of over 200,000 broadband (8‐350 s), inter‐station, Rayleigh‐wave, phase‐velocity curves, illuminates the complex structure and fragmentation of the subducting slabs. Phase‐velocity maps computed using these measurements were inverted for depth‐dependent, shear‐wave velocities using a stochastic particle‐swarm‐optimization algorithm (PSO). The resulting three‐dimensional (3‐D) model makes possible an inventory of slab segments across the Mediterranean. Fourteen slab segments of 200‐800 km length along‐strike are identified. We distinguish three categories of subducted slabs: attached slabs reaching down to the bottom of the model; shallow slabs of shorter length in down‐dip direction, terminating shallower than 300 km depth; and detached slab segments. The location of slab segments are consistent with and validated by the intermediate‐depth seismicity, where it is present. The new high‐resolution tomography demonstrates the intricate relationships between slab fragmentation and the evolution of the relatively small and highly curved subduction zones and collisional orogens characteristic of the Mediterranean realm.

Description: Crystallographic preferred orientation (CPO) and the associated seismic anisotropy of serpentinites are important factors for the understanding of tectonic settings involving hydrated Earth´s mantle, for example, at slow-spreading mid-ocean ridges. CPO of lizardite and magnetite in low-grade metamorphic serpentinites from the Atlantis Massif oceanic core complex (Mid-Atlantic Ridge, 30°N) were determined using synchrotron high energy X-ray diffraction in combination with Rietveld texture analysis. Serpentinite mesh structures show weak CPO while deformed samples show a single (0001) maximum perpendicular to the foliation. Seismic anisotropies calculated from CPO show up to 〉11% anisotropy for compressional waves (Vp) and shear wave splitting up to 0.38 km/s in the deformed samples. This indicates that deformation in shear zones controls elastic anisotropy and highlights its importance in defining the seismic signature of hydrated upper mantle.