ALBERT

Description / Table of Contents: The supercontinent-cycle hypothesis attributes planetary-scale episodic tectonic events to an intrinsic self-organizing mode of mantle convection, governed by the buoyancy of continental lithosphere that resists subduction during the closure of old ocean basins, and the consequent reorganization of mantle convection cells leading to the opening of new ocean basins. Characteristic timescales of the cycle are typically 500 to 700 million years. Proposed spatial patterns of cyclicity range from hemispheric (introversion) to antipodal (extroversion), to precisely between those end members (orthoversion). Advances in our understanding can arise from theoretical or numerical modelling, primary data acquisition relevant to continental reconstructions, and spatiotemporal correlations between plate kinematics, geodynamic events and palaeoenvironmental history. The palaeogeographic record of supercontinental tectonics on Earth is still under development. The contributions in this Special Publication provide snapshots in time of these investigations and indicate that Earth's palaeogeographic record incorporates elements of all three end-member spatial patterns.

Description / Table of Contents: The rivers of East Asia are some of the largest and most important to human society and the global economy. They drain a variety of terrains from the Tibetan plateau, the hill country of southern China and the steep mountains of Taiwan. The sediment they carry potentially records the long-term evolution of continental environments within the marine stratigraphic record. Sediments reaching the ocean have to traverse the wide continental shelves where they may be reworked and transported by longshore currents, typhoon storm waves, as well as large ocean currents such as the Kuroshio. Deciphering any marine record requires us to understand the dynamics of sediment transport on the continental shelves, and this region acts as a global type example of such processes. Studies in this volume span a wide range of subdisciplines in the marine sciences and provide new insights into how sediment is distributed offshore after leaving the river mouths.

Description / Table of Contents: Constitutive Equation -- Micromechanics -- Variational Energy Formulation -- Anisotropy -- Governing Equation -- Analytical Solution -- Fundamental Solution and Integral Equation -- Poroelastodynamics -- Poroviscoelasticity -- Porothermoelasticity -- Porochemoelasticity -- Appendices -- Index

Description / Table of Contents: This book treats the mechanics of porous materials infiltrated with a fluid (poromechanics), focussing on its linear theory (poroelasticity). Porous materials from inanimate bodies such as sand, soil and rock, living bodies such as plant tissue, animal flesh, or man-made materials can look very different due to their different origins, but as readers will see, the underlying physical principles governing their mechanical behaviors can be the same, making this work relevant not only to engineers but also to scientists across other scientific disciplines. Readers will find discussions of physical phenomena including soil consolidation, land subsidence, slope stability, borehole failure, hydraulic fracturing, water wave and seabed interaction, earthquake aftershock, fluid injection induced seismicity and heat induced pore pressure spalling as well as discussions of seismoelectric and seismoelectromagnetic effects. The work also explores the biomechanics of cartilage, bone and blood vessels. Chapters present theory using an intuitive, phenomenological approach at the bulk continuum level, and a thermodynamics-based variational energy approach at the micromechanical level. The physical mechanisms covered extend from the quasi-static theory of poroelasticity to poroelastodynamics, poroviscoelasticity, porothermoelasticity, and porochemoelasticity. Closed form analytical solutions are derived in details. This book provides an excellent introduction to linear poroelasticity and is especially relevant to those involved in civil engineering, petroleum and reservoir engineering, rock mechanics, hydrology, geophysics, and biomechanics

Description / Table of Contents: As the shale revolution continues in North America, unconventional resource markets are emerging on every continent. In the next eight to ten years, more than 100,000 wells and one- to two-million hydraulic fracturing stages could be executed, resulting in close to one trillion dollars in industry spending. This growth has prompted professionals experienced in conventional oil and gas exploitation and development to acquire practical knowledge of the unconventional realm. Unconventional Oil and Gas Resources: Exploitation and Development provides a comprehensive understanding of the latest advances in the exploitation and development of unconventional resources. With an emphasis on shale, this book: Addresses all aspects of the exploitation and development process, from data mining and accounting to drilling, completion, stimulation, production, and environmental issues. Offers in-depth coverage of sub-surface measurements (geological, geophysical, petrophysical, geochemical, and geomechanical) and their interpretation. Discusses the use of microseismic, fiber optic, and tracer reservoir monitoring technologies and JewelSuite™ reservoir modeling software. Presents the viewpoints of internationally respected experts and researchers from leading exploration and production (E&P) companies and academic institutions

Description / Table of Contents: This book treats the mechanics of porous materials infiltrated with a fluid (poromechanics), focussing on its linear theory (poroelasticity). Porous materials from inanimate bodies such as sand, soil and rock, living bodies such as plant tissue, animal flesh, or man-made materials can look very different due to their different origins, but as readers will see, the underlying physical principles governing their mechanical behaviors can be the same, making this work relevant not only to engineers but also to scientists across other scientific disciplines. Readers will find discussions of physical phenomena including soil consolidation, land subsidence, slope stability, borehole failure, hydraulic fracturing, water wave and seabed interaction, earthquake aftershock, fluid injection induced seismicity and heat induced pore pressure spalling as well as discussions of seismoelectric and seismoelectromagnetic effects. The work also explores the biomechanics of cartilage, bone and blood vessels. Chapters present theory using an intuitive, phenomenological approach at the bulk continuum level, and a thermodynamics-based variational energy approach at the micromechanical level. The physical mechanisms covered extend from the quasi-static theory of poroelasticity to poroelastodynamics, poroviscoelasticity, porothermoelasticity, and porochemoelasticity. Closed form analytical solutions are derived in details. This book provides an excellent introduction to linear poroelasticity and is especially relevant to those involved in civil engineering, petroleum and reservoir engineering, rock mechanics, hydrology, geophysics, and biomechanics.

Description / Table of Contents: In high-temperature geochemistry and cosmochemistry, highly siderophile and strongly chalophile elements can be defined as strongly preferring metal or sulfide, respectively, relative to silicate or oxide phases. The highly siderophile elements (HSE) comprise Re, Os, Ir, Ru, Pt, Rh, Pd, and Au and are defined by their extreme partitioning (〉104) into the metallic phase, but will also strongly partition into sulfide phases, in the absence of metal. The HSE are highly refractory, as indicated by their high melting and condensation temperatures and were therefore concentrated in early accreted nebular materials. Within the HSE are the platinum-group elements (PGE), which include the six elements lying in the d-block of the periodic table (groups 8, 9, and 10, periods 5 and 6), i.e., Os, Ir, Ru, Pt, Rh and Pd. These six elements tend to exist in the metallic state, or bond with chalcogens (S, Se, Te) or pnictogens (P, As, Sb, Bi). Rhenium and Au do not necessarily behave as coherently as the PGE, due to their differing electronegativity and oxidation states. For these reasons, a clear definition between the discussion of the PGE and the HSE (PGE, Re and Au) exists in the literature, especially in economic geology, industrial, or bio-medical studies. The strongly chalcophile elements can be considered to include S, Se, and Te. These three elements are distinguished from other chalcophile elements, such as Cd or Pb, because, like the HSE, they are all in very low abundances in the bulk silicate Earth. By contrast with the HSE, S, Se, and Te all have far lower melting and condensation temperatures, classifying them as highly volatile elements. Moreover, these elements are not equally distributed within chondrite meteorite groups. Since their initial distribution in the Solar nebula, planetary formation and differentiation process have led to large fractionations of the HSE and strongly chalcophile elements, producing a range of absolute and relative inter-element fractionations. The chemical properties of the HSE, that set them apart from any other elements in the periodic table, have made them geochemical tracers par excellence. As tracers of key processes, the HSE have found application in virtually all areas of the physical Earth sciences. These elements have been used to inform on the nucleosynthetic sources and formation of the Solar System, planetary differentiation, late accretion addition of elements to planets, core-formation and possible core-mantle interaction, crust-mantle partitioning, volcanic processes and outgassing, formation of magmatic, hydrothermal and epithermal ore deposits, ocean circulation, climate-related events, weathering, and biogeochemical cycling. More recently, studies of strongly chalcophile elements are finding a similar range of applications. Their utility lies in the fact that these elements will behave as siderophile or strongly chalcophile elements under reducing conditions, but will also behave as lithophile or atmophile elements under oxidizing conditions, as experienced at the present day Earth’s surface. A key aspect of the HSE is that three long-lived, geologically useful decay systems exist with the HSE as parent (107Pd–107Ag), or parent–daughter isotopes (187Re–187Os and 190Pt–186Os). This volume is dedicated to some of the processes that can be investigated at high-temperatures in planets using the HSE and strongly chalcophile elements. While this volume is not dedicated to the practical applications of the HSE and strongly chalcophile elements, it would be remiss not to briefly discuss the importance of these elements in society. All of these elements have found important societal use, from the application of Au as a valued commodity in early societies, through to the present-day; the importance of S and Se in biological processes; the discovery and implementation of Pt, Pd, and subsequently other PGE to catalytic oxidation, and the importance of the anti-cancer drug cisplatin (cis-[Pt(NH3)2Cl2]) to anti-tumour treatments. The use of the PGE, most especially Pt, Pd and Rh, in the automotive industry to generate harmless gases has caused some potential collateral effects; the possible environmental impact and human health-risks from available PGE in the environment. An entire volume can (and should!) equally be written on the utility of the HSE and strongly chalcophile elements during low-temperature geochemistry. In this volume, a number of key areas are reviewed in the use of the HSE and strongly chalcophile elements to investigate fundamental processes in high-temperature geochemistry and cosmochemistry. It is divided into five parts. The first part of the volume concerns measurements and experiments. Chapter 1, by Brenan et al. (2016), provides an comprehensive overview of experimental constraints applied to understanding HSE partitioning under a range of conditions, including: liquid metal–solid metal; metal– silicate; silicate–melt; monosulfide solid solution (MSS)–sulfide melt; sulfide melt–silicate melt; silicate melt–aqueous fluid–vapor. Chapter 2, by Meisel and Horan (2016) provides a summary of analytical methods, issues specifically associated with measurement of the HSE, and a review of important reference materials. The second part of the volume concerns the cosmochemical importance of the HSE and strongly chalcophile elements. In their assessment of nucleosynthetic isotopic variations of siderophile and chalcophile elements in Solar System materials, Yokoyama and Walker (2016, Chapter 3) discuss some of the fundamentals of stellar nucleosynthesis, the evidence for nucleosynthetic anomalies in pre-Solar grains, bulk meteorites and individual components of chondrites, ultimately providing a synthesis on the different information afforded by nucleosynthetic anomalies of Ru, Mo, Os, and other siderophile and chalcophile elements. Chapter 4 concerns the HSE in terrestrial bodies, including the Earth, Moon, Mars and asteroidal bodies for which we have materials as meteorites. Day et al. (2016) provide a summary of HSE abundance and 187Os/188Os variations in the range of materials available and a synthesis of initial Solar System composition, evidence for late accretion, and estimates of current planetary mantle composition. The third part of the volume concerns our understanding of the Earth’s mantle from direct study of mantle materials. In Chapter 5, Aulbach et al. (2016) discuss the importance and challenges associated with understanding HSE in the cratonic mantle, providing new HSE alloy solubility modelling for melt extraction at pressures, temperatures, fO2 and fS2 pertaining to conditions of cratonic mantle lithosphere formation. Luguet and Reisberg (2016) provide similar constraints on non-cratonic mantle in Chapter 6, emphasizing the importance of combined geochemical and petrological approaches to fully understand the histories of mantle peridotites. The information derived from studies of Alpine peridotites, obducted ophiolites and oceanic abyssal peridotites are reviewed in Chapter 7 by Becker and Dale (2016). The fourth part of the volume focusses on important minerals present in the mantle and crust. Chapter 8 provides a broad overview of mantle chalcophiles. In this chapter, Lorand et al. (2016) emphasise that chalcophile and siderophile elements are important tracers that can be strongly affected by host minerals as a function of sulfur-saturation, redox conditions, pressure, temperature, fugacity of sulfur, and silicate melt compositions. Along a similar theme in Chapter 9, O’Driscoll and Gonzalez-Jimenez (2016) provide an overview of platinum-group minerals (PGM), pointing out that, where present PGM dominate the HSE budget of silicate rocks. Finally in this section, Harvey et al. (2016) examine the importance of Re–Os–Pb isotope dating methods of sulfides for improving our understanding of mantle processes (Chapter 10). The fifth and final part of the volume considers the important of the HSE for studying volcanic and magmatic processes. In Chapter 11, Gannoun et al. (2016) provide a synthesis of the most abundant forms of volcanism currently operating on Earth, including mid-ocean ridge basalts, volcanism unassociated with plate boundaries, and subduction zone magmatism. The volume is completed in Chapter 12 by Barnes and Ripley (2016), by an appraisal of the obvious importance of magmatic HSE ore formation in Earth’s crust.

Description / Table of Contents: A major rifting episode began in the Afar region of northern Ethiopia in September 2005. Over a ten-day period, c. 2.5 km3 of magma were intruded along a 60 km-long dyke separating the Arabian and Nubian plates. Over the next five years, a further 13 dyke intrusions caused continued extension, eruptions and seismicity. This activity led to a renewed international focus on the role of magmatism in rifting, with major international collaborative projects working in Afar and Ethiopia to study the ongoing activity and to place it in a broader context. This book brings together articles that explore the role of magmatism in rifting, from the initiation of continental break-up through to full seafloor spreading. We also explore the hazards related to rifting and the associated volcanism. This work has implications for our understanding of how continents break-up and the associated distribution of resources in rift basins and continental margins.