ISSN:
1741-2765
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract In order to develop a moderately tough transparent polymer, a three-component modified epoxy was investigated. The polymer system included an epichlorohydrin/bisphenol A epoxy, a polyoxypropyleneamine curing agent and a curing accelerator. Twelve different compositions were prepared and evaluated in a series of static and dynamic tests to determine the material properties important in photoelastic studies of fracture. Static tests showed that the critical strain-energy release rate could be varied from 1.4 to 4.1 lb/in. by changing the constituents in the blending of the epoxy. These results forG Ic indicate that the modified epoxies are considerably tougher than Homalite 100 (G Ic =0.33 lb/in.) which is commonly employed as a model material in dynamic photoelastic studies. Dynamic photoelastic tests were conducted with half-plane models in order to determine the dilatational- and distortional-wave velocities,c 1 andc 2, as well as dynamic values of the modulus of elasticityE and Poisson's ratio ν at loading times of the order of 10−5 s. These results indicated that the dynamic modulus of some of the modified epoxies was significantly higher than the static modulus indicating that these polymers are rate sensitive. One of the epoxy materials, Blend No. 3 withG Ic =2.65 lb/in. (464J/m2), was calibrated dynamically. The material fringe value changed nearly linearly as a logarithmic function of time with an increase of about 100 percent as the loading time decreased from 104 to 10−4 s. This large variation inf σ implies that the calibration constant must be adjusted when interpreting dynamic fringe patterns. Two of the epoxy compositions were also characterized in a number of fracture experiments involving crack propagation at velocities ranging from arrest conditions to terminal velocity where branching initiates. Dynamic isochromatic-fringe loops were photographed with a Cranz-Schardin multiple-spark camera. The fringe loops were analyzed to give the instantaneous stress-intensity factorK as a function of crack velocity å. The å vs.K curves appear to be invertedL shapes; however, there appears to be a double branch on the vertical part of theL. Also a slightly higherK is required for accelerating cracks and a lowerK for decelerating cracks. Further investigation is required to identify the basic mechanism involved in this fracture behavior.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF02324202
Permalink