ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Influence of surface layers on the sensitivity to stress corrosion of austenitic and high-tensile steelsWith steel alloys, tension crack corrosion is one of the most unpleasant corrosion phenomena. In the case of austenitic chrome nickel steels, this type of corrosion is generally caused by solutions containing halides. The sensitivity of austenitic steels depends on their alloy composition. In general, steels, containing ferrite are less sensitive, as the ferrite is attacked first so that the austenite is cathodically protected. The phenomena encountered in the microrange can also be transferred to the macrorange, in as much as the austenitic materials is connected with a more electronegative metal. For instance, the chromium-plating of austenitic structural members gives rise to a ferritic surface zone rich in chromium which, in certain electrolytes, acts as an anode in respect of the parent material and provides a cathodic protection for the austenite. Tension crack corrosion of high-tensile ferritic steels in acid solutions containing hydrogen sulphide can be ascribed to the penetration, into the steel, of the atomic hydrogen thus formed. The crack sensitivity can be reduced by an anodic current load, as the development of hydrogen will then take place at the cathode. It was found that lead coating is a suitable cathode.
Notes:
Die Spannungsrißkorrosion bei Stahllegierungen ist eine der unangenehmsten Korrosionserscheinungen. Bei den austenitischen Chrom-Nickel-Stählen führen meist halogenhaltige Lösungen zur Auslösung dieser Korrosionsart. Die Empfindlichkeit der austenitischen Stähle ist abhängig von ihrer Legierungszusammensetzung. Im Allgemeinen sind ferrithaltige Stähle unempfindlicher, da der Ferrit bevorzugt angegriffen und damit der Austenit kathodisch geschützt wird. Die Vorgänge im Mikrobereich können auch auf den Makrobereich übertragen werden, indem der austenitische Werkstoff mit einem unedleren Metall leitend verbunden wird. Durch eine Inkromierung austenitischer Bauteile entsteht z. B. auf der Oberfläche eine chromreiche ferritische Zone, die in bestimmten Elektrolyten gegenüber dem Grundwerkstoff anodisch ist und den Austenit kathodisch Schützt.Die Spannungsrißkorrosion hochfester ferritischer Stähle in schwefelwasserstoffhaltigen sauren Lösungen ist auf das Eindringen des sich bildenden atomaren Wasserstoffs in den Stahl zurückzuführen. Durch eine anodische Strombelastung kann die Bruchempfindlichkeit vermindert werden, da die Wasserstoffentwicklung an der Kathode erzwungen wird. Als eine geeignete Methode hat sich die Verbleiung erwiesen.
Additional Material:
14 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19600111204
Permalink