ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
The structure of tetrahedral amorphous carbon (ta-C) films deposited by a filtered cathodic vacuum arc has been studied using micro-Raman spectroscopy in terms of substrate bias, nitrogen gas partial pressure (ta-C:N films) or aluminum content in a mixed aluminum/carbon target (ta-C:Al films) during deposition. The first-order Raman spectra generally show a broad feature overlaid by a disordered (D) peak and a graphitic (G) peak. The contribution of sp3 bonding to the Raman spectrum is not explicit, since the Raman phonon line is more sensitive to the sp2 carbon bonding due to its larger Raman scattering cross section. However by comparing the ratios of the intensities, the full widths at half maximum (FWHM), and the peak areas between the D and G peaks, the sp3 contribution may indirectly be reflected by the complex Raman features. The G peak position for the ta-C and ta-C:N films appears to not change significantly with the change of substrate bias voltage or N2 partial pressure, whereas the shift of the D peak is more appreciable. On the contrary, the G peak position for the ta-C:Al films shows a continuous decrease with increasing Al content. For the undoped ta-C films, the minimum intensity, area, and FWHM ratios between the D peak and the G peak are obtained at a bias around −100 V, which corresponds to the maximum sp3 content in the ta-C films. These ratios for the ta-C:N and ta-C:Al films, however, generally increase with increased N or Al content, which indicates the increase of sp2 bonded clusters. © 1999 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.371657
Permalink