ALBERT

Description: Secondary organic aerosol (SOA) nearly always exists as an internal mixture, and the distribution of this mixture depends on the formation mechanism of SOA. A model is developed to examine the influence of using an internal mixing state based on the mechanism of formation and to estimate the radiative forcing of SOA in the future. For the present day, 66% of SOA is internally mixed with sulfate, while 34% is internally mixed with primary soot. Compared with using an external mixture, the direct effect of SOA is decreased due to the decrease in total aerosol surface area and the increase of absorption efficiency. Aerosol number concentrations are sharply reduced, and this is responsible for a large decrease in the cloud albedo effect. Internal mixing decreases the radiative effect of SOA by a factor of 〉4 compared with treating SOA as an external mixture. The future SOA burden increases by 24% due to CO2 increases and climate change, leading to a total (direct plus cloud albedo) radiative forcing of −0.05 W m−2. When the combined effects of changes in climate, anthropogenic emissions, and land use are included, the SOA forcing is −0.07 W m−2, even though the SOA burden only increases by 6.8%. This is caused by the substantial increase of SOA associated with sulfate in the Aitken mode. The Aitken mode increase contributes to the enhancement of first indirect radiative forcing, which dominates the total radiative forcing.

Description: Combining sample plot and image data has been widely used to map forest carbon density at local, regional, national and global scales. When mapping is conducted using multiple spatial resolution images at different scales, field observations have to be collected at the corresponding resolutions to match image values in pixel sizes. Given a study area, however, to save time and cost, field observations are often collected from sample plots having a fixed size. This will lead to inconsistency of spatial resolutions between sample plots and image pixels and impede the mapping and product quality assessment. In this study, a methodological framework was proposed to conduct mapping and accuracy assessment of forest carbon density at four spatial resolutions by combining remotely sensed data and reference values of sample plots from a systematical, nested and clustering sampling design. This design led to one field observation dataset at a 30 m spatial resolution sample plot level and three other reference datasets by averaging the observations from three, five and seven sample plots within each of 250 m and 500 m sub-blocks and 1000 m blocks, respectively. The datasets matched the pixel values of a Landsat 8 image and three MODIS products. A sequential Gaussian co-simulation (SGCS) and a sequential Gaussian block co-simulation (SGBCS), an upscaling algorithm, were employed to map forest carbon density at the spatial resolutions. This methodology was tested for mapping forest carbon density in Huang-Feng-Qiao forest farm of You County in Eastern Hunan of China. The results showed that: First, all of the means of predicted forest carbon density values at four spatial resolutions fell in the confidence intervals of the reference data at a significance level of 0.05. Second, the systematical, nested and clustering sampling design provided the potential to obtain spatial information of forest carbon density at multiple spatial resolutions. Third, the relative root mean square error (RMSE) of predicted values at the plot level was much greater than those at the sub-block and block levels. Moreover, the accuracies of the up-scaled estimates were much higher than those from previous studies. In addition, at the same spatial resolution, SGCSWA (scaling up the SGCS and Landsat derived 30 m resolution map using a window average (WA)) resulted in smallest relative RMSEs of up-scaled predictions, followed by combinations of Landsat images and SGBCS. The accuracies from both methods were significantly greater than those from the combinations of MODIS images and SGCS. Overall, this study implied that the combinations of Landsat 8 images and SGCSWA or SGBCS with the systematical, nested and clustering sampling design provided the potential to formulate a methodological framework to map forest carbon density and conduct accuracy assessment at multiple spatial resolutions. However, this methodology needs to be further refined and examined in other forest landscapes.

Description: For the planning and sustainable management of forest resources, well-managed plantations are of great significance to mitigate the decrease of forested areas. Monitoring these planted forests is essential for forest resource inventories. In this study, two ALOS PALSAR-2 quad-polarimetric synthetic aperture radar (SAR) images and ground measurements were employed to estimate growing stem volume (GSV) of Chinese fir plantations located in a hilly area of southern China. To investigate the relationships between forest GSV and polarization characteristics, single and fused variables were derived by the Yamaguchi decomposition and the saturation value of GSV was estimated using a semi-exponential empirical model as a base model. Based on the estimated saturation values and relative root mean square error (RRMSE), the single and fused characteristics and corresponding models were selected and integrated, which led to a novel saturation-based multivariate method used to improve the GSV estimation and mapping of Chinese fir plantations. The new findings included: (1) All the original polarimetric characteristics, statistically, were not significantly correlated with the forest GSV, and their logarithm and ratio transformation fused variables greatly improved the correlations, thus the estimation accuracy of the forest GSV. (2) The logarithm transformation of surface scattering resulted in the greatest saturation, value but the logarithm transformation of double-bounce scattering resulted in the smallest RRMSE of the GSV estimates. (3) Compared with the single transformations, the fused variables led to more reasonable saturation values and obviously reduced the values of RRMSE. (4) The saturation-based multivariate method led to more accurate estimates of the forest GSV than the univariate method, with the smallest value (29.64%) of RRMSE achieved using the set of six variables. This implied that the novel saturation-based multivariate method provided greater potential to improve the estimation and mapping of the forest GSV.

Description: Estimating the net primary production (NPP) of vegetation is essential for eco-environment conservation and carbon cycle research. Remote sensing techniques, combined with algorithm models, have been proven to be promising methods for NPP estimation. High-precision and real-time NPP monitoring in heterogeneous areas requires high spatio-temporal resolution remote sensing data, which are not easy to acquire by single remote sensors, especially in cloudy weather. This study proposes to fuse images of different sensors to provide high spatio-temporal resolution data for NPP estimation in cloud-prone areas. Firstly, the time series Normalized Difference Vegetation Index (NDVI) with a spatial resolution of 30 m and a temporal resolution of 16 days, are obtained by the enhanced spatial and temporal adaptive reflectance fusion model (ESTARFM). Then, the time series NDVI data, combined with meteorological data are input into an improved Carnegie–Ames–Stanford Approach (CASA) model for NPP estimation. This method is validated by a case study of a heavily urbanized area, in the middle reaches of the Yangtze River in China. The results indicate that the NPP estimated by the fused NDVI data has more detailed spatial information than by using the MODIS data. The results show a strong correlation between the actual Landsat8 NDVI and the fused NDVI images, which means that the accuracy of synthetic NDVI images (a 16 day interval and a 30 m resolution) is reliable, and it can provide superior inputs for accurate estimations of a NPP time series. The correlation coefficient (R) and root mean square error between the NPP, based on the fused NDVI and the measured NPP, are 0.66 and 14.280 g C/(m2·yr), respectively, indicating a good consistency. The small discrepancy is caused by the uncertainties of fused NDVI, measurement errors, conversion errors, and other factors in the CASA model. In this study, we achieved NPP with high spatial and temporal resolutions, which can provide higher accuracies of NPP data for analyzing the carbon cycling heavily urbanized areas, compared with similar studies using mono-temporal NPP data. The spatio-temporal fusion technique is an effective way of generating high spatio-temporal resolution images from different sensors, thereby providing enough data for NPP monitoring in urbanized areas.

Description: Rice is one of the world’s major staple foods, especially in China. Highly accurate monitoring on rice-producing land is, therefore, crucial for assessing food supplies and productivity. Recently, the deep-learning convolutional neural network (CNN) has achieved considerable success in remote-sensing data analysis. A CNN-based paddy-rice mapping method using the multitemporal Landsat 8, phenology data, and land-surface temperature (LST) was developed during this study. First, the spatial–temporal adaptive reflectance fusion model (STARFM) was used to blend the moderate-resolution imaging spectroradiometer (MODIS) and Landsat data for obtaining multitemporal Landsat-like data. Subsequently, the threshold method is applied to derive the phenological variables from the Landsat-like (Normalized difference vegetation index) NDVI time series. Then, a generalized single-channel algorithm was employed to derive LST from the Landsat 8. Finally, multitemporal Landsat 8 spectral images, combined with phenology and LST data, were employed to extract paddy-rice information using a patch-based deep-learning CNN algorithm. The results show that the proposed method achieved an overall accuracy of 97.06% and a Kappa coefficient of 0.91, which are 6.43% and 0.07 higher than that of the support vector machine method, and 7.68% and 0.09 higher than that of the random forest method, respectively. Moreover, the Landsat-derived rice area is strongly correlated (R2 = 0.9945) with government statistical data, demonstrating that the proposed method has potential in large-scale paddy-rice mapping using moderate spatial resolution images.

Description: Remote Sensing, Vol. 10, Pages 50: Improving Selection of Spectral Variables for Vegetation Classification of East Dongting Lake, China, Using a Gaofen-1 Image Remote Sensing doi: 10.3390/rs10010050 Authors: Renfei Song Hui Lin Guangxing Wang Enping Yan Zilin Ye There is a large amount of remote sensing data available for land use and land cover (LULC) classification and thus optimizing selection of remote sensing variables is a great challenge. Although many methods such as Jeffreys–Matusita (JM) distance and random forests (RF) have been developed for this purpose, the existing methods ignore correlation and information duplication among remote sensing variables. In this study, a novel approach was proposed to improve the measures of potential class separability for the selection of remote sensing variables by taking into account correlations among the variables. The proposed method was examined with a total of thirteen spectral variables from a Gaofen-1 image, three class separability measures including JM distance, transformed divergence and B-distance and three classifiers including Bayesian discriminant (BD), Mahalanobis distance (MD) and RF for classification of six LULC types at the East Dongting Lake of Hunan, China. The results showed that (1) The proposed approach selected the first three spectral variables and resulted in statistically stable classification accuracies for three improved class separability measures. That is, the classification accuracies using three or more spectral variables statistically did not significantly differ from each other at a significant level of 0.05; (2) The statistically stable classification accuracies obtained by integrating MD and BD classifiers with the improved class separability measures were also statistically not significantly different from those by RF; (3) The numbers of the selected spectral variables using the improved class separability measures to create the statistically stable classification accuracies by MD and BD classifiers were much smaller than those from the original class separability measures and RF; and (4) Three original class separability measures and RF led to similar ranks of importance of the spectral variables, while the ranks achieved by the improved class separability measures were different due to the consideration of correlations among the variables. This indicated that the proposed method more effectively and quickly selected the spectral variables to produce the statistically stable classification accuracies compared with the original class separability measures and RF and thus improved the selection of the spectral variables for the classification.

Description: Spectral reflectance distortions caused by terrain and solar illumination seriously reduce the accuracy of mapping forest carbon density, especially in mountainous regions. Many models have been developed for mitigating or eliminating the terrain effects on the quality of remote sensing images in hilly and mountainous areas. However, these models usually use global parameters, which may lead to overcorrections for regions with poor illumination and steep slopes. In this study, we present a local parameter estimation (LPE) method based on a pixel-moving window for topographic correction (TC), which can be considered as a general optimization framework for most semiempirical TC models. We set seven kernel sizes for the presented framework, which are 15 pixels, 25 pixels, 50 pixels, 100 pixels, 250 pixels, 500 pixels, and 1000 pixels, respectively. The proposed method was then applied to four traditional TC models, Minnaert (MIN), C Correction (CC), Sun Canopy Sensor + C (SCSC) and Statistical Empirical Correction (SEC), to form four new TC models. These new models were used to estimate forest carbon density of a mountainous area in Southern China using field plot data and a Landsat 8 image. Four evaluation methods, including correlation analysis, the stability of land covers, comparison of reflectance between sunlit and shaded slopes, and accuracy assessment of forest carbon density, were employed to evaluate the contributions of moving window sizes, and assess the performance of the TC models for forest carbon density estimation. The results show that the four TC models with LPE perform much better than the traditional TC models in reducing the topographic effects and improving the estimation accuracy of forest carbon density for the study area. Among the traditional TC models, SEC performs slightly better than SCSC, CC, and MIN. Therefore, the SEC-based model with LPE, that is, LPE-SEC, gets greater R2 and smaller relative RMSE values in estimating forest carbon density than other models. Moreover, all the means of the predicted forest carbon density values fall in the confidence interval of the validation data at a significant level of 0.05. Overall, this study implies that the proposed method with LPE provides great potential to improve the performance of TC and forest carbon density estimation for the study area. It is expected that the improved TC method can be applied to other mountainous areas to improve the quality of remotely sensed images.

Description: The radiative forcing of the aerosol–radiation interaction can be decomposed into clear-sky and cloudy-sky portions. Two sets of multi-model simulations within Aerosol Comparisons between Observations and Models (AeroCom), combined with observational methods, and the time evolution of aerosol emissions over the industrial era show that the contribution from cloudy-sky regions is likely weak. A mean of the simulations considered is 0.01±0.1 W m−2. Multivariate data analysis of results from AeroCom Phase II shows that many factors influence the strength of the cloudy-sky contribution to the forcing of the aerosol–radiation interaction. Overall, single-scattering albedo of anthropogenic aerosols and the interaction of aerosols with the short-wave cloud radiative effects are found to be important factors. A more dedicated focus on the contribution from the cloud-free and cloud-covered sky fraction, respectively, to the aerosol–radiation interaction will benefit the quantification of the radiative forcing and its uncertainty range.