ISSN:
1618-2650
Keywords:
Best. von Kohlenstoff in Gesteinen und Mineralien
;
Coulometrische Titration
;
Gesamt-, Carbonat- und Nichtcarbonat-C
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
Description / Table of Contents:
Zusammenfassung Für die Bestimmung von Gesamt-, Carbonat- und Nichtcarbonat-Kohlenstoff in magmatischen, metamorphen und sedimentären Gesteinen (auch bei höheren Anteilen an organischem C) ist ein Verfahren nach dem Prinzip der coulometrischen Titration geeignet. Der Gesamt-Kohlenstoff wird ermittelt durch Erhitzung der auf 〈0,125 mm zerkleinerten Probe bei etwa 1250°C im Sauerstoffstrom ohne irgendwelche Zusätze. Zur Bestimmung von Nichtcarbonat-Kohlenstoff wird eine bestimmte Menge Gesteinspulver mit Salzsäure versetzt und auf einem Aluminiumblock HCl abgeraucht. Der Carbonat-Kohlenstoff entweicht als CO2. Zurück bleibt der Nichtcarbonat-Kohlenstoff, welcher wie der Gesamt-Kohlenstoff coulometrisch bestimmt wird. Der Carbonat-Kohlenstoff bzw. die äquivalente Menge CO2 ergibt sich dann aus der Differenz von Gesamt- zu Nichtcarbonat-Kohlenstoff. Das Verfahren ist anwendbar auf Kohlenstoffgehalte in Gesteinen von etwa 10 ppm bis ≧20 Gew.-% bei mittleren Standardabweichungen von etwa 0,0002–0,05% C (Richtwerte). Die Analysendauer für eine Probe beträgt etwa 3–5 min.
Notes:
Abstract For the measurement of total carbon the sample, ground finer than 0.125 mm and without the addition of any reagents, is ignited in a current of oxygen at about 1250°C. Non-carbonate carbon can be analysed after another portion of the sample is treated with conc, hydrochloric acid and evaporated on a hot plate; the carbonates are decomposed and the carbonate carbon is removed as carbon dioxide. The residue is non-carbonate carbon which is also determined by the coulometric method. The difference between total carbon and non-carbonate carbon corresponds to carbonate carbon or its equivalent as carbon dioxide. The method is applicable to carbon contents in rocks from 10 ppm to ≧20 wt.-%. The standard deviation is approximately 0.0002 to 0.05% C. Each carbon analysis takes about 3 to 5 min.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00428060
Permalink