ALBERT

Notes: La diversité des conditions d’environnement (roche-mère, climat, végétation) prévalant dans un massif de moyenne montagne (Vosges, France) nous a permis d’établir leur rôle dans la manifestation à des degrés divers des propriétés andiques dans le sol. Nous avons examiné un lot de 13 profils sélectionnés à partir de critères lithologiques, climatiques et morphologiques présumés favorables à l’expression de ces propriétés andiques: roches-mères basiques d’origine volcanique ou non, climat montagnard très humide, abondance de matière organique sur une grande profondeur. Ces profils se subdivisent en deux populations. Quatre d’entre eux peuvent être classés comme des Andisols (Alic Fulvudands) alors que les autres ont des propriétés andiques trop faiblement exprimées pour appartenir à cet ordre et doivent être classés comme des Andic Haplumbrepts. Tous ces sols sont dépourvus d’allophanes. Dans cet environnement de moyenne montagne, les facteurs favorables à la manifestation de propriétés andiques sont d’une part, les altitudes et les expositions qui induisent de faibles températures et de fortes précipitations et d’autre part, l’altérabilité des roches-mères déterminée par leur composition chimique et minéralogique. Comme les vieux matériaux volcaniques sur lesquels se développent la plupart des sols étudiés sont pauvres en verres, voire complètement dévitrifiés, les Andisols vosgiens présentent beaucoup d’analogies avec les Andisols non-allophaniques non-volcaniques identifiés dans d’autres environnements. Leurs propriétés andiques sont faiblement exprimées et elles sont dues à la présence de complexes organo-métalliques associée à des teneurs élevées en carbone organique.The diverse environmental conditions (parent material, climate, vegetation) in the Vosges Mountains (France) allow us to investigate their role in the development of soils with varying degrees of andic properties. We studied 13 profiles selected on the basis of lithological, ecological and morphological criteria assumed to favour the formation of andic properties, i.e. basic parent materials of volcanic and other origins, wet montane climates and accumulation of thick layers of organic matter. The profiles belong to two classes: four are Andisols, more precisely Alic Fulvudands, and the others are Andic Haplumbrepts with only weakly expressed andic properties. In this montane environment the factors favouring the andic properties seem to be on the one hand height and exposure inducing cold and humid microclimates, and on the other the chemical and mineralogical composition controlling the weatherability of the soil’s parent materials. For example, the old volcanic rocks on which most of the soils occur are poor in glassy material or are even completely devitrified. Accordingly, Andisols in the Vosges are like those of non-volcanic, non-allophanic Andisols elsewhere in the world: their andic properties are weakly expressed and are caused by organo-metallic complexes associated with their upper organic-rich horizons rather than by allophanes.

Notes: In semi-arid tropics soil hardening may reduce both water infiltrability and biological activity, thus inducing the development of large almost bare areas. A sandy-loam soil with contrasting loose and underlying hard horizons was studied in the southern plain of the Chad basin. The fabrics of these horizons were studied using combined sieving and sedimentation techniques, mercury porosimetry and scanning electron microscopy. The horizons had similar particle size distributions of the skeleton grains. The hard horizon differs by a small increase in its fine clay (〈 0·2 μm) content. The hardness is closely related to a fabric with clay coatings on the skeleton grains and clay wall-shaped bridges linking the latter. This induces a strong continuity of the solid phase. This fabric requires a minimum of clay content (6%) to make the coatings and the wail-shaped bridges, and it can be 30% less porous than the loose horizon, without any change in the packing of the skeleton grains. These characteristics of the fabric of the hard horizon are like those of fragipans elsewhere. The continuity of the solid phase, from the microscopic to the macroscopic scale, as well as the absence of a network of cracks explains the considerable strength of the hard horizon, and consequently the difficulties for water infiltration, root penetration and tillage.

Notes: Low-activity clay soils on old planation surfaces of the tropics are generally considered as stable end points of soil formation. It is therefore surprising to find Andisols on them. We characterized the properties of six profiles representative of these soils in the western part of the Nilgiri Hills (2000–2500 m above mean sea level), Southern India, where the present climatic conditions are cool (mean annual temperature 15°C) and humid (mean annual rainfall 2500 mm). Thick (50–80 cm) dark-reddish brown topsoil overlies strongly desilicated yellowish-red materials. This horizon has andic properties to a sufficient depth and the carbon content requirement of the melanic epipedon to place these soils in the Andisol order. Our data as well as the history of the Nilgiri Hills suggest that the formation of these non-allophanic Andisols resulted from the succession of two main steps. First, a ‘lateritic’ weathering cycle led to the relative accumulation of secondary Al and Fe oxides. Later, the accumulation of organic matter favoured by a more recent climatic change induced complexation by organic acids of Al and Fe oxides, and the production of enough metal–humus complexes to give rise to andic properties. Such soils, in which secondary Al and Fe oxides, generally considered as indicators of an advanced weathering stage, are involved in a new cycle of soil formation, are original Andisols.

Notes: The surface composition of particles present in the fine earth (〈 2 mm) of 50 soil horizons differing in composition and pedogenetic origin (13 soil profiles) was analysed by X-ray photoelectron spectroscopy (XPS) to assess the capability and limitations of this technique and to gain better knowledge of the soil samples. The surfaces were systematically enriched in carbon, sometimes up to 1000 times, indicating that the soil particle surfaces are coated with organic substances, even in horizons where the bulk organic content is less than 0.1 g kg−1. The distribution of carbon in the various oxidation states was 0.569 ± 0.008 C[0], 0.275 ± 0.004 C[+1], 0.089 ± 0.003 C[+2] and 0.066 ± 0.002 C[+3] for most horizons (mean ± standard error, 69 data). Only Andosol surface horizons systematically had surface organic matter in a more oxidized state. After correcting the results for the presence of organic coatings, we found that Si was generally depleted and Al enriched at the surface of soil particles, while Fe was either depleted or enriched depending on the sample considered. However, the coating of the coarser soil particles by the finer ones and their differential composition explained this observation and limits the interest of XPS for characterizing the surface enrichment of inorganic elements in crude soil samples. These limitations should be considered when interpreting XPS results in future work. Nevertheless, XPS can analyse the adsorbed organic matter and its functional composition of carbon without the need for any chemical or physical extraction that might alter the structure and composition of the organic molecules.

Notes: Morphological, geochemical and mineralogical studies were carried out in a representative soil catena of the low-elevation plateaux of the upper Amazon Basin to interpret the steps and mechanisms involved in the podzolization of low-activity clay soils. The soils are derived from Palaeozoic sandstones. They consist of Hydromorphic Podzols under tree savannah in the depressions of the plateaux and predominantly of Acrisols covered by evergreen forest elsewhere.Incipient podzolization in the uppermost Acrisols is related to the formation of organic-rich A and Bhs horizons slightly depleted in fine-size particles by both mechanical particle transfer and weathering. Weathering of secondary minerals by organic acids and formation of organo-metallic complexes act simultaneously over short distances. Their vertical transfer is limited. Selective dissolution of aluminous goethite, then gibbsite and finally kaolinite favour the preferential cheluviation of first Fe and secondly Al. The relatively small amount of organo-metallic complexes produced is related to the quartzitic parent materials, and the predominance of Al over Fe in the spodic horizons is due to the importance of gibbsite in these low-activity clay soils.Morphologically well-expressed podzols occur in strongly iron-depleted topsoils of the depression. Mechanical transfer and weathering of gibbsite and kaolinite by organic acids is enhanced and leads to residual accumulation of sands. Organo-metallic complexes are translocated in strongly permeable sandy horizons and impregnate at depth the macro-voids of embedded soil and saprolite materials to form the spodic Bs and 2BCs horizons. Mechanical transfer of black particulate organic compounds devoid of metals has occurred later within the sandy horizons of the podzols. Their vertical transfer has formed well-differentiated A and Bh horizons. Their lateral removal by groundwater favours the development of an albic E horizon. In an open and waterlogged environment, the general trend is therefore towards the removal of all the metals that have initially accumulated as a response to the ferralitization process and have temporarily been sequestrated in organic complexes in previous stages of soil podzolization.

Notes: Second derivative diffuse reflectance spectroscopy (DRS) in the visible range has been used to characterize changes in colour and identify the nature of Fe oxides which withstand reduction during experimental yellowing of reddish materials. It is accepted that haematite dissolves preferentially and faster than goethite, and Al-substitution controls the dissolution kinetics of Fe oxides. However, DRS has shown that haematite is more resistant than predicted and that some Fe-oxides, probably trapped within kaolinite particles, are inaccessible to solvents. DRS allows the nature of dissolved phases at each deferration step to be determined and changes in Al-content of residual phases throughout deferration to be followed. It also demonstrated that Helmholtz coordinates correlate very well with changes in Fe-oxide mineralogy and are preferable to redness ratings when monitoring differential dissolution of Fe oxides through colour measurements. DRS is a powerful and sensitive technique for monitoring the dissolution of Fe oxides in soils.

Notes: [Auszug] To approach field conditions, we percolated an aqueous aniline (50 p.p.m.) solution through columns containing a 9:1 (w/w) mixture of fine sand and clay. Homoionic Fe(III), Al and Ca exchanged forms of raw montmorillonite from Camp-Berteau (Morocco) were used. An appropriate percolation velocity ...

Notes: [Auszug] Birnessite (d-???2) was prepared and used in this study because it is one of the most common Mn oxides in sediments and soils4. The appearance of As(v) in solution after adding solutions of various concentrations of As(ni) to Mn(iv) oxide (Table 1) clearly shows that As(ni) is converted to As(v) by ...