ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
Thin TiN layers have been successfully produced on Si and SiO2 by reactive evaporation combined with rapid thermal annealing. Results of composition, resistivity, and stress measurements on these layers are reported. The TiN layers have a resistivity around 40 μΩ cm and a high stress of between 1 and 6 GPa. The composition ratio of nitrogen to titanium, measured by elastic recoil detection (ERD), combined with time-of-flight, was found to vary between 0.8 and 1.0 depending on the deposition conditions. In addition to the stoichiometry determination, ERD also clearly shows the presence of a TiSi2 layer between the TiN and the Si substrate. It is also shown that good TiN layers can be produced by reactive evaporation for nitrogen partial pressures between 1.0 and 2.0×10−5 mbar and for titanium evaporation rates between 0.3 and 0.5 nm/s.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.356392
Permalink