ALBERT

Description: The recent Leonid meteor storms have propelled meteor shower forecasting from an idea into the realm of practical application, invoked several times per year by numerous spacecraft. This paper will describe shower activity predictions, which give zenith hourly rate (ZHR) as a function of time, and how these are translated into spacecraft risks. Common spacecraft meteor shower mitigation strategies will also be discussed, and the important issue as to when to implement such operations considered. It should be noted that, while the recent meteor storms did not result in the loss of a vehicle, there were a few spacecraft anomalies attributed to Leonid strikes, and the nature of these will be commented upon. Finally, we assess the current state of the art in shower forecasting, and take a look "down the road" at some possible outbursts in the near future.

Description: Lunar video observations are routinely conducted at the NASA Marshall Space Flight Center in Huntsville Alabama for the detection of meteoroid impacts. Over 240 impacts have been detected since the start of the observing program initiated approximately 5 years ago. During this time it has been fairly rare that lunar observing conditions and the weather have been favorable during the peak of the major showers. However, observing conditions were marginally favorable during the peak of the 2010 Geminids. On Dec. 14, 2010 approximately 5.5 hours of video were recorded. Even though the lunar phase was just outside the constraints established for optimum lunar impact monitoring, the resulting video was of sufficient quality that 21 lunar impacts were detected yielding an average impact rate of approximately 4 per hour. This compares to 17 lunar impacts detected over 40 nights of observations ( approximately 100 hours of lunar video) yielding an average impact rate of 1 per 6 hours for the whole of 2010, excluding Dec. 14. The results of the 2010 Geminid lunar impact detections will be discussed along with previous results from the 2006 Geminid shower that also coincided within the lunar observing window.

Description: No abstract available

Description: The International Space Station (ISS) will be the largest, highest power spacecraft placed in orbit. Because of this the design of the electrical power system diverged markedly from previous systems. The solar arrays will operate at 160 V and the power distribution voltage will be 120 V. The structure is grounded to the negative side of the solar arrays so under the right circumstances it is possible to drive the ISS potential very negative. A plasma contactor has been added to the ISS to provide control of the ISS structure potential relative to the ambient plasma. The ISS requirement is that the ISS structure not be greater than 40 V positive or negative of local plasma. What are the ramifications of operating large structures with such high voltage power systems? The application of a plasma contactor on ISS controls the potential between the structure and the local plasma, preventing degrading effects. It is conceivable that there can be situations where the plasma contactor might be non-functional. This might be due to lack of power, the need to turn it off during some of the build-up sequences, the loss of functionality for both plasma contactors before a replacement can be installed, similar circumstances. A study was undertaken to understand how important it is to have the contactor functioning and how long it might be off before unacceptable degradation to ISS could occur. The details of interaction effects on spacecraft have not been addressed until driven by design. This was true for ISS. If the structure is allowed to float highly negative impinging ions can sputter exposed conductors which can degrade the primary surface and also generate contamination due to the sputtered material. Arcing has been known to occur on solar arrays that float negative of the ambient plasma. This can also generate electromagnetic interference and voltage transients. Much of the ISS structure and pressure module surfaces exposed to space is anodized aluminum. The anodization thickness is very thin to provide the required solar absorptance and emittance. For conditions where ISS structure can charge negative a large percentage of the array voltage, the dielectric strength of this layer is low, and dielectric breakdown (arcing) can occur. The energy stored capacitively in the structure can be delivered to the arc. The mechanisms by which this energy is delivered and how much of the energy is available hasn't been fully quantified. Questions have been raised regarding the possibility of whether a sustained arc might result due to current collected by the solar arrays from local plasma. It was postulated that even if dielectric breakdown didn't occur, impacts due to micrometeoroids and space debris could penetrate thin layers of dielectric on ISS and initiate an arc due to the coupling provided by the dense local plasma produced by the impact. This was proven in experiments conducted jointly by MSFC and Auburn University. A target chamber with a simulated ionospheric plasma and a biased, anodized aluminum plate and a 1-microfarad capacitor was used. The plate was then impacted by 75-micron particles accelerated to orbital velocity. Arc discharges were sustained for higher voltages but a threshold appears below which no discharge was initiated. Most items without an exposed power system will float electrically near the local plasma potential. This is true of the Space Shuttle, an Astronaut on EVA, and similar items. The structure of ISS might be at a large negative voltage. Therefore, capacitively stored energy can be transferred during docking, installing external boxes and equipment and Astronaut contact with ISS structure. The circumstances of when this can happen and the resulting effects are evaluated in this study. Also, a crewmember on EVA might be in the vicinity of an arc. All safety aspects of such an encounter including charging, molten particles from the arc site and EMI have been evaluated. This paper will report on the total results of this study focussed on the 4A configuration, scheduled to be complete in November, 2000. Interactions such as arcing, debris induced arcs, sustained arcs, sputtering, contamination from sputtering and arcing, docking interactions and Astronaut safety issues will all be addressed.

Description: The Natural Environment Branch at NASA s Marshall Space Flight Center (MSFC) has the responsibility to provide engineering support to programs and projects in natural environments. The Natural Environments Branch (EV13) is responsible for natural environments definitions, modelling, database development and effects assessments. EV13 personnel develop requirements for flight projects and provide operational support for space and launch vehicle systems. To accomplish these responsibilities, Branch . personnel have developed modelling and analytical tools which include planetary atmospheres, meteoroids, ionizing radiation, plasmas and ionospheres, magnetic and gravitational fields, spacecraft charging modelling, and radiation effects on electronic parts. NASA s Meteoroid Environment Office is operated within the EV13 and provides meteoroid engineering models and shower forecasts to spacecraft designers and operators. This paper will describe the capabilities within the Natural Environments Effects Branch including; examples of natural environment definitions, radiation transport, output from the Global Reference Atmosphere Models for Earth, Venus, Mars, Titan, and Neptune), recent NASCAP 2K results from solar sail modelling, and meteor stream models

Description: No abstract available

Description: A database of properties of meteors, and software that provides access to the database, are being developed as a contribution to continuing efforts to model the characteristics of meteors with increasing accuracy. Such modeling is necessary for evaluation of the risk of penetration of spacecraft by meteors. For each meteor in the database, the record will include an identification, date and time, radiant properties, ballistic coefficient, radar cross section, size, density, and orbital elements. The property of primary interest in the present case is density, and one of the primary goals in this case is to derive densities of meteors from their atmospheric decelerations. The database and software are expected to be valid anywhere in the solar system. The database will incorporate new data plus results of meteoroid analyses that, heretofore, have not been readily available to the aerospace community. Taken together, the database and software constitute a model that is expected to provide improved estimates of densities and to result in improved risk analyses for interplanetary spacecraft. It is planned to distribute the database and software on a compact disk.

Description: A comprehensive set of environment definitions is necessary from the beginning of the development of a spacecraft. The Cross-Program Design Specification for Natural Environments (DSNE, SLS-SPEC-159) was originally developed during the Constellation Program and then modified and matured for the Exploration Programs (Space Launch System and Orion). The DSNE includes launch, low-earth orbit, trans-lunar, cis-lunar, interplanetary, and entry/descent/landing environments developed from standard and custom databases and models. The space environments section will be discussed in detail.

Description: No abstract available

Description: The construction of small, inexpensive all-sky cameras designed specifically for the NASA Fireball Network is described. The use of off-the-shelf electronics, optics, and plumbing materials results in a robust and easy to duplicate design. Engineering challenges such as weather-proofing and thermal control and their mitigation are described. Field-of-view and gain adjustments to assure uniformity across the network will also be detailed.