Publication Date:
2012-05-03
Description:
The present work reports the results of the study of the effect of metal contaminants on the oxidation, thermal, and storage stability of Jatropha curcas biodiesel (JCB) with and without antioxidants. Taking Pyrogallol (PY) as the most effective antioxidant based on the earlier work of the authors, JCB was mixed with different transition metals—Fe, Ni, Mn, Co, and Cu in different concentrations. Induction period (IP) was measured using Rancimat method (EN 14112). The ASTM D6468 and thermogravimetric analysis (TGA) methods are used for evaluating the thermal behavior of JCB. Based on results, several correlations are developed for assessing the oxidation, thermal, and storage stability. For the purpose of optimization, response surface methodology (RSM) is used. A comparison between the experimental values and those predicted by the correlation shows that all the data points lie within ±10% deviation lines of the experimental results. The optimized concentration of PY for 2 ppm metal-contaminated biodiesel to have an IP of 6 hr is 326.96, 361.64, 386.15, 417.24, and 600 ppm for Fe, Ni, Mn, Co, and Cu, respectively. From the experiments it is found that if metal concentration is 0, then, 200 ppm of PY is sufficient to make biodiesel stable for 6 months. If metal (Fe) concentration is 2 ppm or more, then 800 ppm PY is sufficient to make biodiesel stable for 5.5 months. This is the first study of its kind being reported in the literature in which RSM is used for design of experiment for developing the correlation for oxidation, thermal, and storage stability. The models developed by RSM will be highly useful for predicting the optimum antioxidant concentration to impart maximum fuel stability in JCB.
Print ISSN:
2090-7451
Electronic ISSN:
2090-746X
Topics:
Energy, Environment Protection, Nuclear Power Engineering
Permalink
