Electronic Resource
Oxford, UK
:
Blackwell Publishing Ltd
Fatigue & fracture of engineering materials & structures
3 (1980), S. 0
ISSN:
1460-2695
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract— Stress gradients at the root of a notch are significant for the notch effect and the size effect of fatigue properties. Usually the gradient of the stress distribution in the minimum section is considered. In the present paper the variation of the tensile stress along the edge of the notch is considered. Calculations are made for a variety of notches. The results indicate a remarkable conformity of stress distributions at the notch root if the same peak stress and notch root radius (ρ) apply. Consequently K1and ρare highly characteristic for the stress distribution around the notch. Along the edge of the notch the stress decreases at a much slower rate than in the minimum section going away from the material surface. For the stress along the edge of the notch a stress gradient coefficient is defined. The variation of this coefficient is fairly small for several notches and K1, values. A 5% lower stress as compared to the peak stress at the notch root is obtained at about 0.02 ρbelow the material surface and at a distance of about 0.18 ρalong the material surface.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1460-2695.1980.tb01382.x
Permalink
|
Location |
Call Number |
Expected |
Availability |
