ALBERT

Beschreibung: Magnetic sensors are widely used in aeroengines and their health management systems, but they are rarely installed in the engine hot section due to the loss of magnetic properties by permanent magnets with increasing temperature. The paper presents and verifies models and design solutions aimed at improving the performance of an inductive sensor for measuring the motion of blades operated at elevated temperatures (200–1000 °C) in high pressure compressors and turbines. The interaction of blades with the sensor was studied. A prototype of the sensor was made, and its tests were carried out on the RK-4 rotor rig for the speed of 7000 rpm, in which the temperature of the sensor head was gradually increased to 1100 °C. The sensor signal level was compared to that of an identical sensor operating at room temperature. The heated sensor works continuously producing the output signal whose level does not change significantly. Moreover, a set of six probes passed an initial engine test in an SO-3 turbojet. It was confirmed that the proposed design of the inductive sensor is suitable for blade health monitoring (BHM) of the last stages of compressors and gas turbines operating below 1000 °C, even without a dedicated cooling system. In real-engine applications, sensor performance will depend on how the sensor is installed and the available heat dissipation capability. The presented technology extends the operating temperature of permanent magnets and is not specific for blade vibration but can be adapted to other magnetic measurements in the hot section of the aircraft engine.