ISSN:
1573-9066
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Conclusions 1. It has been shown that Relit coatings of high particle microhardness can in principle be produced by the technique of atmospheric spray-deposition. 2. Spray-deposited Relit consists of disk-shaped and globular particles having a complex microstructure. Their open porosity is 7–11%, while their density is 13.5–14.0 g/cm3. 3. The microhardness of spray-deposited Relit is strongly affected by the powder particle size. When Relit powder of 45–150-μ particle size is used, the resulting microhardness lies in the range 650–2400 kg/mm2. 4. The bonds between the particles in spray-deposited Relit are comparatively weak. The bend strength of the material is 5–10 kg/mm2, while its Vickers hardness is 100–250 kg/mm2. 5. To produce wear-resistant surfaces capable of withstanding high specific loads, spray-deposited coatings must be subjected to some additional treatment such as solder consolidation or sintering.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00797389
Permalink