ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract For polypropylene composites filled with ultrafine or particles of the order of microns, (SiO2 and glass, respectively), yield stress was measured as functions of temperature, the rate of strain and filler content. The yield stress of the composites filled with ultrafine particles increased with the filler content and decreased with the filler size, while for the composites filled with glass particles, these relations were reversed. For SiO2 filled composites, the tensile yield stress was found to be reducible with regard to temperature, the rate of strain and the filler content. The Arrhenius plot of the shift factors for composing the logarithmic strain rate — temperature master curve formed a single curve irrespective of the filler content and size. The curve comprised three linear regions with breaks appearing at 60 and 110° C, where the transition of the matrix polymer took place. The master curves obtained for different contents of a given size filler could be further reduced into a grand composite curve by shifting them along the axis of logarithmic strain rate, with the logarithmic second shift factors proportional to the square root of the volume fraction of the filler. The dependence of the filler volume fraction on the second shift factor was related to the dispersion state of fillers in PP matrix, namely, the promotion of the aggregation with filler content. The dependences of the yield stress on the filler volume fraction and size were explained by a modified equation based on the dispersion strength theory, with an aggregation parameter incorporated.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00542072
Permalink
