ALBERT

Description: An experimental investigation is described in which principal emphasis is given to revealing the nature of the motions in the non-linear range of boundary-layer instability and the onset of turbulence. It has as its central purpose the evaluation of existing theoretical considerations and the provision of a sound physical model which can be taken as a basis for a theoretical approach. The experimental method consisted of introducing, in a two-dimensional boundary layer on a flat plate at ‘incompressible’ speeds, three-dimensional disturbances under controlled conditions using the vibrating-ribbon technique, and studying their growth and evolution using hot-wire methods. It has been definitely established that longitudinal vortices are associated with the non-linear three-dimensional wave motions. Sufficient data were obtained for an evaluation of existing theoretical approaches. Those which have been considered are the generation of higher harmonics, the interaction of the mean flow and the Reynold stress, the concave streamline curvature associated with the wave motion, the vortex loop and the non-linear effect of a three-dimensional perturbation. It appears that except for the latter they do not adequately describe the observed phenomena. It is not that they are incorrect or may not play a role in some aspect of the local behaviour, but from the over-all point of view the results suggest that it is the non-linear effect of a three-dimensional perturbation which dominates the behaviour. A principal conclusion to be drawn is that a new perspective, one that takes three-dimensionality into account, is required in connexion with boundary-layer instability. It is demonstrated that the actual breakdown of the wave motion into turbulence is a consequence of a new instability which arises in the aforementioned three-dimensional wave motion. This instability involves the generation of ‘hairpin’ eddies and is remarkably similar in behaviour to ‘inflexional’ instability. It is also shown that the results obtained from the study of controlled disturbances are equally applicable to ‘natural’ transition. © 1962, Cambridge University Press. All rights reserved.

Description: An experimental investigation is described which has as its objectives the extension of the technical data base pertaining to roughness-induced transition and the advancement of the understanding of the physical processes by which three-dimensional roughness elements induce transition from laminar to turbulent flow in boundary layers. The investigation was carried out primarily with single hemispherical roughness elements surface mounted in a well-characterized zero-pressure-gradient laminar boundary layer on a flat plate. The critical roughness Reynolds number at which turbulence is regarded as originating at the roughness was determined for the roughness elements herein considered and evaluated in the context of data existing in the literature. The effect of a steady and oscillatory free-stream velocity on eddy shedding was also investigated. The Strouhal behaviour of the ‘hairpin’ eddies shed by the roughness and role they play in the evolution of a fully developed turbulent boundary layer, as well as whether their generation is governed by an inflexional instability, are examined. Distributions of mean velocity and intensity of the u-fluctuation demonstrating the evolution toward such distributions for a fully developed turbulent boundary layer were measured on the centreline at Reynolds numbers below and above the critical Reynolds number of transition. A two-region model is postulated for the evolutionary change toward a fully developed turbulent boundary layer: an inner region where the turbulence is generated by the complex interaction of the hairpin eddies with the pre-existing stationary vortices that lie near the surface and are inherent to a flow about a three-dimensional obstacle in a laminar boundary layer; and an outer region where the hairpin eddies deform and generate turbulent vortex rings. The structure of the resulting fully developed turbulent boundary layer is discussed in the light of the proposed model for the evolutionary process.

Description: The results of an experimental investigation of a turbulent boundary layer with zero pressure gradient are presented. Measurements with the hot-wire anemometer were made of turbulent energy and turbulent shear stress, probability density and flattening factor of u-fluctuation, spectra of turbulent energy and shear stress, and turbulent dissipation. The importance of the region near the wall and the inadequacy of the concept of local isotropy are demonstrated. Attention is given to the energy balance and the intermittent character of the outer region of the boundary layer. Also several interesting features of the spectral distribution of the turbulent motions are discussed.

Description: The manner in which flow in a boundary layer becomes turbulent was investigated on a flat plate at wind speeds generally below 100 feet per second. Hot-wire techniques were used, and many of the results are derived from oscillograms of velocity fluctuations in the transition region. Following a presentation of the more familiar aspects of transition, there are presented the very revealing facts discovered while studying the characteristics of artificially produced turbulent spots. These are: (1) oscillograms of natural transition are identical to oscillograms of spot passage; (2) transition starts from perturbations in the laminar flow as spots which then grow in accordance with the general concept proposed by Emmons. (3) Turbulence always moves downstream followed by laminar flow; (4) the following flow is in a state of calm for a period during which transition will not occur.