ISSN:
1573-4889
Keywords:
codeposition
;
diffusion coating
;
pack cementation
;
thermodynamics
;
oxidation
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The simultaneous deposition of Cr and Si into plain carbon, low-alloy, and austenitic steels using a halide-activated pack-cementation process is described. Equilibrium partial pressures of gaseous species have been calculated using the STEPSOL computer program to aid in designing specific processes for codepositing the desired ratios of Cr and Si into a given alloy. The calculations indicate that NaCl-activated packs are chromizing, while NaF-activated packs deposit more Si with less Cr. The use of a “dual activator” (e.g., NaF+NaCl) allows for the deposition of both Cr and Si in the desired amounts. Single-phase ferritic coatings (150–250 microns thick) with a surface concentration of 20–35 wt.% Cr and 2–4% Si have been grown on AISI 1018, Fe-2.25 Cr-1.0Mo-0.15C, and Fe-0.5 Cr-0.5 Mo-0.2C steels using packs containing a 90 wt.% Cr-10Si binary source alloy, a NaF+NaCl activator, and a silica filler. Two-phase coatings (approximately 75 microns thick) containing 20–25 wt.% Cr and 2.0–2.4% Si have been obtained on 304 stainless steel using packs containing a 90 wt.% Cr-10Si binary source alloy, a NaF activator, and an alumina filler. The same pack chemistry allowed the diffusion of Cr and Si into the austenitic Incoloy 800 alloy without a phase change. A coated Fe-2.25 Cr-1.0 Mo-0.15 C coupon with a surface concentration of Fe-34 wt.% Cr-3Si was cyclically oxidized in air at 700°C for over four months and 47 cycles. The weight gain was very low (〈0.2 mg/cm2) with no scale spalling detected. Coated coupons of AISI 1018 steel, and Fe-0.5 Cr-0.5 Mo-0.2C steel have shown excellent oxidation-sulfidation resistance in reducing, sulfur-containing atmospheres at temperatures from 400 to 700°C and in erosion and erosion-oxidation testing in air at 650 and 850°C.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF01052029
Permalink
