ALBERT

Description: No abstract available

Description: Spot and Runway Departure Advisor (SARDA) is a proposed decision-support tool for air traffic control tower controllers for reducing taxi delay and optimizing the departure sequence. In the present study, the tool's usability was evaluated to ensure that its claimed performance benefits are not being realized at the cost of increasing the work burden on controllers. For the evaluation, workload ratings and questionnaire responses collected during a human-in-the-loop simulation experiment were analyzed to assess the SARDA advisories' effects on the controllers' ratings on cognitive resources (e.g., workload, spare attention) and satisfaction. The results showed that SARDA reduced the controllers' workload and increased their spare attention. It also made workload and attention levels less susceptible to the effects of increases in the traffic load. The questionnaire responses suggested that the controllers generally were satisfied with the ease of use of the tool and the objectives of the SARDA concept, but with some caution. To gain more trust from controllers, the the reasoning behind advisories may need to be made more transparent to them.

Description: This presentation discusses an upcoming simulation for data comm in the terminal area. The purpose of the presentation is to provide the REDAC committee with a summary of some of the work in Data Comm that is being sponsored by the FAA. The focus of the simulation is upon flight crew human performance variables, such as crew procedures, timing and errors. The simulation is scheduled to be conducted in Sept 2012.

Description: Human factors data collected during the SARDA HITL Simulation Experiment include a variety of subjective measures, including the NASA TLX, questionnaire questions regarding situational awareness, advisory usefulness, UI usability, and controller trust. Preliminary analysis of the TLX data indicate that workload may not be adversely affected by use of the advisories, additionally, the controller's subjective ratings of the advisories may suggest acceptance of the tool.

Description: Heart Rate Variability (HRV) has been reported to reflect the person's cognitive and emotional stress levels, and may offer an objective measure of human-operator's workload levels, which are recorded continuously and unobtrusively to the task performance. The present paper compares the HRV data collected during a human-in-the-loop simulation of airport ramp-traffic control operations with the controller participants' own verbal self-reporting ratings of their workload.

Description: This paper describes a study comparing the use of paper strips with virtual flight strips depicted on a new user interface, the Ramp Traffic Console (RTC), designed for use by ramp controllers to be used in place of paper strips. A Human-In-the-Loop (HITL) experiment was performed as the fifth in a series of six HITL simulation studies designed to evaluate a pushback Decision Support Tool (DST) concept for Charlotte Douglas International Airport (CLT). Workload and usability were assessed in post-run and post-study questionnaires. In the RTC virtual flight strip condition, post-run questionnaire results show lower workload ratings across all aspects of workload; additionally a trend is found toward increased usability ratings. Post-study questionnaire results indicate a preference for RTC over paper strips. Additional research is suggested with more training runs and a greater number of participants to increase statistical power. It is also suggested that this new technology be re-evaluated as a part of the ATD-2 (Airspace Technology Demonstration 2) field testing activities.

Description: This document serves as a user manual for the STBO Client in Charlotte Douglas International Airport Air Traffic Control Tower. It describes the elements of the full interface and provides explanations for how to interact with the interface. The document also provides instructions for entering Traffic Management Initiatives, scheduling runway utilization changes, and closing runways. There are also detailed instructions for how to negotiate Approval Request (APREQ) release times using the STBO Client.

Description: Data Exchange and Integration is necessary for progress towards an Integrated Arrival, Departure, and Surface (IADS) traffic management capability. In collaboration with the FAA, NASA has introduced new data exchange elements to Charlotte-Douglas International Airport air traffic facilities, including the American Airlines ramp, as part of the Airspace Technology Demonstration 2 (ATD2). This paper describes the new tools that deliver these elements, and the human factors impact of the tools as measured by post-bank surveys. Workload was unaffected by ATD2 tool use, and situational awareness was improved in the Tower and with Ramp controllers in the second round of surveys. Respondents described their tools as more helpful if they included ATD2 tools 1) in the Tower for insuring compliance for aircraft under a Traffic Management Initiative, 2) in the TRACON when actively used for many TRACON tasks, and 3) in the Ramp in the second round of surveys.

Description: NASA has been working with the FAA and aviation industry partners to develop and demonstrate new concepts and technologies that integrate arrival, departure, and surface traffic management capabilities. In March 2017, NASA conducted a human-in-the-loop (HITL) simulation for integrated surface and airspace operations, modeling Charlotte Douglas International Airport, to evaluate the operational procedures and information requirements for the tactical surface metering tool, and data exchange elements between the airline controlled ramp and ATC Tower. In this paper, we focus on the calibration of the tactical surface metering tool using various metrics measured from the HITL simulation results. Key performance metrics include gate hold times from pushback advisories, taxi-in-out times, runway throughput, and departure queue size. Subjective metrics presented in this paper include workload, situational awareness, and acceptability of the metering tool and its calibration.

Description: NASA has been collaborating with the Federal Aviation Administration (FAA) and aviation industry partners to develop and demonstrate new concepts and technologies for the Integrated Arrival, Departure, and Surface (IADS) traffic management capabilities under the Airspace Technology Demonstration 2 (ATD-2) project. The primary goal of the ATD-2 project is to improve the predictability and the operational efficiency of the air traffic system in metroplex environments while maintaining or improving throughput by enhancing and integrating arrival, departure and surface prediction, scheduling, and management systems. In the Phase 1 Baseline IADS Demonstration, the tactical surface scheduling capability and the user interfaces for ramp controllers and ramp traffic managers were implemented for ramp operations. The purpose of the tactical surface scheduling capability is to provide the airline ramp controller with aircraft pushback advisories that prevent surface congestion and to respond to surface and airspace constraints that become known over relatively short time horizons. For this purpose, the tactical surface metering tool first estimates the capacity of current and near-future runway resources from flight schedule and surveillance data. With demand forecasts and predicted taxi trajectories, this tool computes an efficient runway schedule of aircraft in the planning horizon based on their readiness, Earliest Off-Block Times (EOBTs), and a ration by schedule (RBS) rule. Details on the implementation of the Tactical Surface Metering tool will be provided in the full paper. Both pushback and recommended hold times advisories provided by this surface metering tool are shown on the user interfaces for the ramp controller and the ramp traffic manager, called Ramp Traffic Console (RTC) and Ramp Manager Traffic Console (RMTC), respectively. There is excess queue time in the system due to demand capacity imbalance, this time can be taken as a hold on the runway queue or at the gate and was referred to as the Metering Value. This metering value can be adjusted by the Ramp Manager in collaboration with Air Traffic Controller-Tower Traffic Management Coordinator (TMC). They selected a set of metering values as default values for the tool during human-in-the-loop simulation. As the metering value increases, there is a decrease in the gate hold and increase in the queue time at the runway. Procedures and Information needs related to managing the surface metering procedures were researched in the simulated environment. These procedures will be compared to the procedures adopted at Charlotte Douglas International Airport when the tools were deployed and adopted in November 2017 for one departure push bank per day. Feedback regarding initial issues, information needs such as the need to see EOBTs on the flight data tags and how they compare to scheduled times will also be discussed in the full paper. Initial results will be provided regarding the choice of the metering value and how it was adjusted on a daily basis and what procedures evolved will also be presented in the paper.