ALBERT

Description: Geophysical monitoring activities were an important component of the CO2 injection program at the Ketzin site, Germany. Here we report on the seismic and electrical resistivity tomography (ERT) measurements performed during the period of the site development and CO2 injection. Details on the site geology, the history of the CO2 injection operation, and petrophysical models relevant for the interpretation of the geophysical data are presented. The seismic measurements comprise 2D and 3D surface seismic surveys, vertical seismic profilings, and crosshole measurements. Apart from the measurements, results from advanced processing methods, such as impedance inversion and full-waveform inversion are also presented. In addition, results from crosshole ERT and surface-downhole ERT are presented. If operational efforts are taken into consideration we conclude that a combination of several geophysical methods is preferable given the demands of a spatiotemporally comprehensive monitoring program. We base this conclusion on that the different imaging characteristics and petrophysical sensitivities of different methods can complement each other. An important finding is, based on signal quality and reduced operational costs, that the use of permanent installations is promising. Generally, specific monitoring layouts will depend on site-specific characteristics, such as reservoir depth, availability of wells, petrophysical characteristics, and accessibility of surface locations. Given the comprehensive range of methods applied, the reported results are not only relevant to the operation of CO2 storage sites, but are also of interest to other monitoring projects dealing with fluid injection or production.

Description: 3D time-lapse seismic surveys (4D seismic) have proven to be a suitable technique for monitoring of injected CO2, because when CO2 replaces brine as a free gas it considerably affects elastic properties of porous media. Forward modeling of a 4D seismic response to the CO2 -fluid substitution in a storage reservoir is an inevitable step in such studies. At the Ketzin pilot site (CO2 storage) 67 kilotons of CO2 were injected into a saline aquifer between 2008 and 2013. In order to track migration of CO2 at Ketzin, 3D time-lapse seismic data were acquired by means of a baseline pre-injection survey in 2005 and 3 monitor surveys: in 2009, 2012 and in 2015 (the 1st post-injection survey). Results of the 4D seismic forward modeling with the reflectivity method suggest that effects of the injected CO2 on the 4D seismic data at Ketzin are significant regarding both seismic amplitudes and time delays. These results prove the corresponding observations in the real 4D seismic data at the Ketzin pilot site. But reservoir heterogeneity and seismic resolution, as well as random and coherent seismic noise are negative factors to be considered in this interpretation. Results of the 4D seismic forward modeling with the reflectivity method support the conclusion that even small amounts of injected CO2 can be monitored in such post-injected saline aquifer as the CO2 storage reservoir at the Ketzin pilot site both qualitatively and quantitatively with considerable uncertainties (Lüth et al., 2015).