ISSN:
0933-5137
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The growth of the oxide protective layer on different Ni-Cr-Fe-alloys with variation of oxygen partial pressureHigh temperature alloys e.g. Incoloy 800 H, Hastelloy X and Ni75Cr25 model alloy are in-situ oxidized with variation potentials oxidation of PO2 = 4,41 × 10-19 bar, PO2 = 4,41 × 10-17 bar and PO2 = 176 × 10-16 bar by temperature, 800°. The behaviour of the scales which are oxidized at different oxidizing atmospheres has been investigated in this work, with deuterium permeation. The test of scales as corrosion barrier had been done in sulfidizing atmospheres with PS2 = 1,82 × 10-7 bar. The microstructure of the oxide layers has been investigated with Light Microscopy (LM), Scanning Electron Microscopy (SEM), Analytical Transmission Electron Microscopy (ATEM) and High Resolution Transmission Electron Microscopy (HRTEM). It is found that the deuterium permeation measurement can be correlated as a method for characterization corrosion layer at high temperature alloys. The structure of the oxide layer, the influence of sulfidizing atmospheres, additions of small amounts of reactive elements such as Ti before oxidation, the interface structure between oxide layers and matrix, as well as crystal defects and grain boundaries is explainable.
Notes:
Hochtemperaturlegieungen wie Incoloy 800 H, Hastelloy X und die pulvermetallurgisch hergestellte Modellegierung Ni-Cr/75-25 wurden mit ihren Oxiddeckschichten, die in verschiedenen Oxidationspotentialen mit Sauerstoffpartialdrucken von PO2 = 4.41 × 10-19 bis PO2 = 1.76 × 10-16 bar und bei einer Betriebstemperatur von T = 800° gewachsen sind, untersucht. Während der Oxidation wurde die Deuterium-Permeation gemessen. Gefügeuntersuchungen mit Hilfe der Lichtmikroskopie, der Rasterelektronenmikroskopie und vor allem der Transmissionselektronenmikroskopie unterstützen dabei die Aussagefähigkeit der Permeationsmessungen. Insbesondere werden Aufbau der Oxidschicht, der Einfluß von Schwefel, eine zusätzliche Titanbeschichtung vor der Oxidation, eine eventuell vorhandene Korngrenzenkorrosion und die Struktur der Grenzfläche Werkstoff-Oxidschicht vorgestellt und diskutiert.
Additional Material:
12 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/mawe.19980290111
Permalink