ISSN:
1460-2695
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract— An ultrasonic surface acoustic wave technique for studying the growth behaviour of small fatigue cracks is described. The technique allows crack depth and opening stress to be monitored continuously during the course of a fatigue test. Results are given for a 1740 MPa yield strength, silicon-modified, AISI 4340 steel tested under zero-to-tension cyclic loading. Good agreement is shown between acoustically determined crack depth and that measured by post-fracture optical microscopy. The monitoring of changing crack depth-to-surface length ratios during tests is also demonstrated. Acoustically determined crack opening stresses were found to be about 10% higher than values determined by measurements of crack tip opening displacements by scanning electron microscopy. Effects on crack growth of two different specimen surface preparations, electropolishing and diamond paste polishing, are also reported. Growth rates in electropolished specimens were as much as an order of magnitude higher than in diamond paste polished specimens which had a shallow but significant layer of compressive residual stress.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1460-2695.1994.tb00223.x
Permalink
