ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    Electronic Resource
    Electronic Resource
    [S.l.] : American Institute of Physics (AIP)
    Journal of Applied Physics 73 (1993), S. 5230-5236 
    ISSN: 1089-7550
    Source: AIP Digital Archive
    Topics: Physics
    Notes: Long wavelength infrared detection using intersubband transitions has been progressing rapidly in recent years. One advantage of the quantum-well infrared photodetectors is the wavelength tunability as a function of their structural parameters. In this work, we have performed a systematic calculation on the detection wavelength, the absorption linewidth, and the oscillator strength of a typical GaAs/AlxGa1−xAs multiple-quantum-well photodetector, with aluminum molar ratio in the barriers ranging from 0.14 to 0.42 and the quantum-well width ranging from 20 to 70 A(ring). We found that within these material parameters, the detection wavelength can be varied from 5 to over 25 μm. In addition, we also discuss the photoconductive gain of the detectors with respect to the energies of the final state of the optical transition and the satellite valleys of the detector material.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Electronic Resource
    Electronic Resource
    [S.l.] : American Institute of Physics (AIP)
    Journal of Applied Physics 88 (2000), S. 1612-1623 
    ISSN: 1089-7550
    Source: AIP Digital Archive
    Topics: Physics
    Notes: In this article, we discuss the utilities of corrugated quantum well infrared photodetectors (C-QWIPs) in detector material characterization. By measuring the detector responsivity as a function of corrugation period, several important detector parameters, such as the absorption coefficient α of parallel propagating light and the energy resolved photoconductive gain g, can be directly deduced. For the QWIP material presented, α at the peak was found to be 0.21 μm−1 under the usual operating condition. This value of α corresponds to an absorption length of 4.8 μm. Instead of being a constant, the value of g also varies significantly across the excitation spectrum, and the peak value is larger than the noise gain at large bias. Our results show that the present characterization technique is capable of providing accurate and detailed information on the intrinsic properties of QWIP materials under actual operating conditions. It is extremely useful in detector optimization. In addition, we also show the characteristics of C-QWIPs with an additional vertical trench at the center of each corrugation to gain more insights into the distribution of light intensity in a C-QWIP structure. © 2000 American Institute of Physics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Electronic Resource
    Electronic Resource
    [S.l.] : American Institute of Physics (AIP)
    Journal of Applied Physics 91 (2002), S. 551-564 
    ISSN: 1089-7550
    Source: AIP Digital Archive
    Topics: Physics
    Notes: InGaAs/AlGaAs quantum well structures have been shown to be versatile for infrared detection. By changing the material composition, one can tune the detection wavelength from 2 to 35 μm and beyond. However, there have been few systematic calculations on the absorption wavelength of these structures with respect to their structural parameters. In this work we have adopted the transfer-matrix method to calculate both their energy levels and the wave functions. From this calculation, the absorption and the responsivity spectra of the structures can be predicted. The theory agrees with the experimental result of the test structures. Supported by the experimental evidence, we applied the calculation to a general class of midwavelength detectors and thus established a useful guideline for the detector design in this wavelength range. © 2002 American Institute of Physics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Electronic Resource
    Electronic Resource
    [S.l.] : American Institute of Physics (AIP)
    Journal of Applied Physics 80 (1996), S. 1257-1259 
    ISSN: 1089-7550
    Source: AIP Digital Archive
    Topics: Physics
    Notes: In this work, we show that there is a reduction of photoconductive gain g in quantum well infrared photodetectors from its classical value. The reduction is caused by the quantum nature of electron transport in these structures. On the other hand, the generation-recombination noise is unaffected by the transport model, and remains to be the same as a classical photoconductor. The reduction of g leads to an apparent noise increase in these structures, i.e., the noise gain deduced from the noise measurement is larger than g deduced from the photoconductivity measurements. We compared the present theory with existing experimental data, and found reasonable agreement. © 1996 American Institute of Physics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Electronic Resource
    Electronic Resource
    [S.l.] : American Institute of Physics (AIP)
    Journal of Applied Physics 75 (1994), S. 4731-4736 
    ISSN: 1089-7550
    Source: AIP Digital Archive
    Topics: Physics
    Notes: A long-wavelength λc=18 μm infrared hot-electron transistor (IHET) with low dark current is demonstrated. In order to achieve long-wavelength absorption, a low barrier height is required, which in turn results in a large dark current. Therefore, operation of a normal long-wavelength quantum-well infrared photodetector (QWIP) structure is limited to very low temperatures and biases due to the thermally activated dark current. In the IHET, a high-energy pass filter placed after 30 periods of GaAs/AlGaAs quantum wells blocks the temperature-activated dark current while allowing high-energy photoexcited electrons to pass and be collected as photocurrent. A comparison of the dark current to the 300 K background photocurrent shows that the QWIP structure without the high-energy pass filter demonstrates background-limited infrared photodetection (BLIP) only at T≤35 K. Furthermore, in order to avoid saturating a typical readout circuit, detector operation of the QWIP is restricted to biases less than 0.08 V at 35 K. In contrast, the filtered dark current in the IHET is reduced by two to four orders of magnitude such that BLIP performance can be achieved for temperatures up to T=55 K without saturating the readout circuit. Because of the preferential current filtering effect, the noise equivalent temperature difference of the IHET can be improved by a factor of 100 at T=55 K. The dark-current-limited detectivity was found to be D*=1×1010 cm Hz1/2/W at λp=15 μm, Ve=−0.2 V, and T=55 K.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Electronic Resource
    Electronic Resource
    [S.l.] : American Institute of Physics (AIP)
    Journal of Applied Physics 78 (1995), S. 5765-5774 
    ISSN: 1089-7550
    Source: AIP Digital Archive
    Topics: Physics
    Notes: The influence of the nonuniform photogeneration on the electric-field distribution is considered for quantum-well photodetectors under drift velocity saturation. We found that spatial nonuniformity of photogenerated electrons due to attenuation of the infrared flux induces strong electric-field domains. The electric-field domains formation is accompanied by degradation of the signal-to-noise ratio. We obtained that domain structures undergo realignment at certain threshold voltage as a result of feedback influence of the quantum well recharging on the photogeneration rates which in turn cause the additional electric-field redistribution. The realignment manifests itself in a steplike change of photoconductive gain and quantum efficiency of photoabsorption at threshold bias voltage and is followed by considerable increase of generation–recombination noise. © 1995 American Institute of Physics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Electronic Resource
    Electronic Resource
    [S.l.] : American Institute of Physics (AIP)
    Journal of Applied Physics 77 (1995), S. 1771-1775 
    ISSN: 1089-7550
    Source: AIP Digital Archive
    Topics: Physics
    Notes: Photocurrent and excess current noise in a quantum well infrared photodetector are considered using a drift-diffusion model of charge carrier transport. The effect of quantum well recharge under the influence of the nonuniform generated charge carriers is addressed. The recharging effect drastically changes the dependency of both photoconductive gain and excess current noise gain upon detector parameters. We have found that for uniform generation, both gains coincide. For nonuniform generation, noise gain is essentially different from photoconductive gain. This distinction is of the order of 100% for the real device parameters. The existing discrepancy in formulae for photoconductive gain and excess current noise derived in different models, which implicitly assumed drift transport of electrons, is cleared up.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Electronic Resource
    Electronic Resource
    Woodbury, NY : American Institute of Physics (AIP)
    Applied Physics Letters 58 (1991), S. 1533-1535 
    ISSN: 1077-3118
    Source: AIP Digital Archive
    Topics: Physics
    Notes: Recently, experimental evidence has revealed that the energy distribution of the dark current in a typical multiple quantum well GaAs infrared detector is extremely broad, in contrast to the narrowly distributed photocurrent. In this letter, we present the current transfer ratio of an infrared hot-electron transistor with a superlattice collector filter. From the current transfer characteristics, we demonstrate that the superlattice is able to collect electrons with specific energy against a broad background. The energy filtering characteristics can be attributed to the underlying band structure of the superlattice. When the filter is applied to infrared radiation detection, the detectivity of the transistor is improved.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Electronic Resource
    Electronic Resource
    Woodbury, NY : American Institute of Physics (AIP)
    Applied Physics Letters 72 (1998), S. 7-9 
    ISSN: 1077-3118
    Source: AIP Digital Archive
    Topics: Physics
    Notes: A quantum-well infrared photodetector (QWIP) based on the corrugated light-coupling scheme has been fabricated and tested for remote temperature sensing. The QWIP consists of two stacks of multiple quantum wells (MQWs), each sensitive in one of the atmospheric infrared transmission windows and each with a separate readout circuit. High optical coupling efficiency is obtained in both wavelength ranges, demonstrating the use of the corrugated structure for two-color detection. By monitoring the ratio of the photocurrent generated simultaneously in each MQW stack, the temperature of the object emitting the radiation can be determined, regardless of its emissivity and the geometrical factors. This temperature sensing ability is tested by using a blackbody radiator with precision temperature control as the target. The agreement between the measured and the preset temperatures indicates that the corrugated QWIP is capable of precision thermometric measurements. © 1998 American Institute of Physics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Electronic Resource
    Electronic Resource
    Woodbury, NY : American Institute of Physics (AIP)
    Applied Physics Letters 68 (1996), S. 1446-1448 
    ISSN: 1077-3118
    Source: AIP Digital Archive
    Topics: Physics
    Notes: In this letter, we report a quantum well infrared photodetector geometry for normal incidence light coupling. The new optical coupling scheme utilizes total internal reflection at the sidewalls of triangular wires to create favorable optical polarization for infrared absorption. These wires are created by chemically etching an array of V grooves through the detector active region along a specific crystallographic direction. Experimental results from the initial single color as well as two-color detectors with linear wires and unthinned substrate show efficient light coupling comparable to the standard 45° edge coupling, without the undesirable wavelength dependence or spectral narrowing effect of a conventional grating structure. At the same time, the dark current density is substantially reduced due to the partial material removal. Further improvement is expected by creating a two-dimensional coupling structure with substrate thinning. © 1996 American Institute of Physics.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...