ISSN:
1573-482X
Source:
Springer Online Journal Archives 1860-2000
Topics:
Electrical Engineering, Measurement and Control Technology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The two-parameter Weibull strength distribution of {1 1 1} n-type silicon prismatic bars was determined in four-point bending and analyzed as a function of specimen size (width), loading rate, two different crystallographic orientations, and specimen orientation (polished or etched surface in tension). 100% fractography was performed to classify strength-limiting flaw types and to censor the strength data. All flaw types were extrinsic. Machining or cutting damage in the form of chipped edges (an edge-type flaw) was the dominant strength-limiting flaw when the polished surface was subjected to tensile stress, while a flat-bottomed etch pit (a surface-type flaw) was the dominant strength-limiting flaw when the etched surface was subjected to tensile stress. The censored Weibull strength distribution was independent of specimen width, loading rate (indicative of slow crack growth insusceptibility), and the two crystallographic orientations; however, it was dependent on specimen orientation. Pooling of the strength data was employed to tighten the confidence intervals about the censored parameters. The results from this study indicate that different extrinsic strength-limiting flaws and strength distributions will be operative depending on the manner in which a silicon component is stressed.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1008973231053
Permalink