ISSN:
0268-2605
Keywords:
zinc sulphide
;
precipitation
;
nanocrystallites
;
nanopores
;
optical transmission spectroscopy
;
vibrational spectroscopy
;
Raman spectroscopy
;
X-ray diffraction
;
transmission electron microscopy
;
thermogravimetric analysis
;
Chemistry
;
Industrial Chemistry and Chemical Engineering
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
Notes:
During the synthesis of ZnS powders by wet chemical precipitation, the formation of nanoporous spheres is observed. The powders have been investigated using thermogravimetric analysis, X-ray diffraction and optical spectroscopies. Nanopore formation can be explained by several stages of growth. The formation of nanoparticles as primary particles is followed by their agglomeration forming secondary particles. These secondary particles are monodispersed spheres with a considerable porosity, because the agglomeration of the nanoparticles is unlikely to be volume-filling. The voids or nanopores formed by this agglomeration process in the secondary particles is estimated to comprise around 35% of the sphere volume. They are mainly filled with water and the residues of the chemical reagents. Water in the pores partially reacts with ZnS and forms hydrated sulphates. The chemical reagents used for the precipitation reactions are also found to be bound to the nanocrystallite's surfaces as ligands in some cases. Depending on the reaction conditions and reagents, the agglomeration of the nanoparticles can also be modified or hindered by the use of complexing agents acting as a sterically stabilizing surface layer on the nanocrystallites. The agglomeration of nanoparticles to larger units being a general phenomenon, this use of complexing agents to control pore formation and agglomerate size should be applicable to other nanocrystalline systems. © 1998 John Wiley & Sons, Ltd.
Additional Material:
7 Ill.
Type of Medium:
Electronic Resource
Permalink
