ISSN:
1572-9567
Schlagwort(e):
capillary viscometer
;
1,1-dichloro-2,2,2-trifluoroethane
;
HCFC 123
;
viscosity
Quelle:
Springer Online Journal Archives 1860-2000
Thema:
Physik
Notizen:
Abstract The viscosity of HCFC 123 was measured over the range of temperature from 223 to 418 K and pressure up to 20 MPa. The experimental method was that of the capillary flow and a closed-circuit high-pressure viscometer was used. The sample fluid was circulated through a Pyrex glass capillary from a high-pressure plunger system. The constant of the Pyrex glass capillary was calibrated against the reference standard, pure water. The viscosity of the sample was calculated from the flow rate, the pressure drop at the capillary, and the capillary constant using the Hagen-Poiseuille equation. Measurements were made on seven isotherms. In the case of the transpiration method, the density is needed for calculation of the viscosity from the kinematic viscosity. The available density data of HCFC 123 are less reliable than those for CFC 11. Therefore, uncertainty in the viscosity of HCFC 123 is larger, although the measured kinematic viscosity itself has a reproducibility of 0.1 %. HCFC 123 is proposed as an alternative to CFC 11. Comparisons of the data for these two substances show that the viscosity of HCFC 123 is similar in magnitude to that of CFC 11 at temperatures around 350 K, higher at lower temperatures, and lower at higher temperatures. The pressure gradients for these two corresponding substances are similar over the entire temperature range.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1007/BF00503879
Permalink
