ISSN:
0021-9304
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Medicine
,
Technology
Notes:
The vital first phase of the overall materials study to protract the life of total joint replacements is the identification of the fracture toughness and fatigue properties of bone cements. Information gained from fatigue testing, performed in a manner which simulates in vivo conditions, and fracture toughness, which is a measure of the propensity of a crack to propagate, is the first step towards the prediction of the life of the total joint replacement. Part I of this study identified the fracture toughness characteristics of two acrylic bone cements, while the present work has been concerned with determining the fatigue behavior by means of tests conducted in a rotating bending fatigue apparatus. Fatigue specimens were fabricated under conditions which approximated clinical procedures and then tested while immersed in bovine serum at 37°C in order to simulate in vivo conditions. In addition, a similar study was completed on specimens tested in air at ambient temperature for purposes of comparison. Testing was conducted in both of these environments on specimens containing zero and 10.0 wt % BaSO4. Cyclic loading frequency was maintained between 1200 and 1400 cycles/min in order to insure that crack propagation was the sole mechanism of failure, i.e., failure via cyclic thermal softening was obviated.Results of this phase of the study, when analyzed by a Student t-test at the 90% confidence level with four degrees of freedom, indicate that the fatigue life of specimens tested in bovine serum at 37°C is superior to that of specimens tested in air at ambient temperature. The addition of BaSO4 to Simplex-P cement, while not significant at the 90% confidence level, was significant in increasing the fatigue life in air at the 80% confidence level; however, this effect was not noticeable when testing in bovine serum at 37°C. Examination of the fracture surfaces enabled calculation of the critical stress intensity factor which when compared with values from an earlier work showed good agreement.
Additional Material:
7 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/jbm.820110413
Permalink
