Publication Date:
2019-06-28
Description:
The use of a holographic technique for accurately measuring the surface figure of the Tidbinbilla (Canberra, Australia) 64-m antenna is described. Described by Bennet et al. (1976) and Scott and Ryle (1977), the technique consists of measuring the complex far-field response of the antenna at a single frequency using a terrestrial, satellite-borne or celestial radiation source of small angular diameter. This two-dimensional pattern is then Fourier transformed to yield the complex illumination function across the antenna aperture; antenna surface deviations are manifested as phase fluctuations in this function. The speed and low cost of using the technique are real advantages where observing schedules with the telescopes are heavily subscribed. For the 64-m antenna, the unweighted rms surface deviation is found to be about 1.8 mm; when weighted by the radial amplitude taper it is about 1.1 mm. Two earlier estimates by other methods had yielded tolerances of about 1.2 mm rms and 1.1 mm rms. It is planned to use the technique to survey the 22-m antennas of the Australian Telescope accurate to approximately 0.1 mm rms near 10 Ghz.
Keywords:
INSTRUMENTATION AND PHOTOGRAPHY
Type:
Astronomical Society of Australia, Proceedings (ISSN 0066-9997); 5; 2 19
Format:
text
Permalink