ISSN:
0933-5137
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Application of Fracture Mechanics for the Improvement of the Life Time of Forming DiesAn investigation was undertaken to determine the life times of dies when these life times are determined by crack propagation from such stress raisers as notches. Notched DCB specimens were used to investigate the processes of crack initiation and propagation in the high temperature steel X 40 CrMo V 51 at 500°C. The results showed that the life times depend both on the heat treatment of the material and also on the length of hold time at temperature. Hold times during the forming process should be minimized in order to avoid fast creep crack propagation.
Notes:
Die Lebensdauer von Werkzeugen in der Umformtechnik wird in vielen Fällen durch die Entstehung von Rissen begrenzt, die in Gebieten mit hohen Spannungen wie Kerben auftreten. Zur Bestimmung der Lebensdauer wurden an gekerbten Proben aus dem Warmarbeitsstahl X 40CrMo V 51 bei 500°C Rißeinleitung und Rißfortschritt untersucht. Es zeigt sich, daß die Lebensdauer einerseits von der Wärmebehandlung des Gesenkwerkstoffes, andererseits von der Haltezeit beim Umformen abhängt. Die Haltezeiten sollten so kurz wie möglich sein, um schnelles Kriechrißwachstum zu vermeiden.
Additional Material:
7 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/mawe.19800111202
Permalink