ALBERT

Description: The scaling relations presently derived illustrate the influence of ballistic coefficient and L/D primary vehicle parameters on the peak heating rate and total heating/unit area for gliding entry of the earth atmosphere at parabolic speed. Comparisons with stagnation-point and windward centerline laminar and turbulent heating during three Space Shuttle flights are presented. It is found that total heat input/unit area is reduced by decreasing both of the primary vehicle parameters.

Description: The objective of this report is to provide useful engineering formulations and to instill a modest degree of physical understanding of the phenomena governing convective aerodynamic heating at high flight speeds. Some physical insight is not only essential to the application of the information presented here, but also to the effective use of computer codes which may be available to the reader. A discussion is given of cold-wall, laminar boundary layer heating. A brief presentation of the complex boundary layer transition phenomenon follows. Next, cold-wall turbulent boundary layer heating is discussed. This topic is followed by a brief coverage of separated flow-region and shock-interaction heating. A review of heat protection methods follows, including the influence of mass addition on laminar and turbulent boundary layers. Also discussed are a discussion of finite-difference computer codes and a comparison of some results from these codes. An extensive list of references is also provided from sources such as the various AIAA journals and NASA reports which are available in the open literature.

Description: A new research effort at NASA Ames Research Center has been initiated in Planetary Defense, which integrates the disciplines of planetary science, atmospheric entry physics, and physics-based risk assessment. This paper describes work within the new program and is focused on meteor entry and breakup. Over the last six decades significant effort was expended in the US and in Europe to understand meteor entry including ablation, fragmentation and airburst (if any) for various types of meteors ranging from stony to iron spectral types. These efforts have produced primarily empirical mathematical models based on observations. Weaknesses of these models, apart from their empiricism, are reliance on idealized shapes (spheres, cylinders, etc.) and simplified models for thermal response of meteoritic materials to aerodynamic and radiative heating. Furthermore, the fragmentation and energy release of meteors (airburst) is poorly understood. On the other hand, flight of human-made atmospheric entry capsules is well understood. The capsules and their requisite heat shields are designed and margined to survive entry. However, the highest speed Earth entry for capsules is 13 kms (Stardust). Furthermore, Earth entry capsules have never exceeded diameters of 5 m, nor have their peak aerothermal environments exceeded 0.3 atm and 1 kWcm2. The aims of the current work are: (i) to define the aerothermal environments for objects with entry velocities from 13 to 20 kms; (ii) to explore various hypotheses of fragmentation and airburst of stony meteors in the near term; (iii) to explore the possibility of performing relevant ground-based tests to verify candidate hypotheses; and (iv) to quantify the energy released in airbursts. The results of the new simulations will be used to anchor said risk assessment analyses.With these aims in mind, state-of-the-art entry capsule design tools are being extended for meteor entries. We describe: (i) applications of current simulation tools to spherical geometries of diameters ranging from 1 to 100 m for an entry velocity of 20 kms and stagnation pressures ranging from 1 to 100 atm; (ii) the influence of shape and departure of heating environment predictions from those for a simple spherical geometry; (iii) assessment of thermal response models for silica subject to intense radiation; and (iv) results for porosity-driven gross fragmentation of meteors, idealized as a collection of smaller objects. Lessons learned from these simulations will be used to help understand the Chelyabinsk meteor entry up to its first point of fragmentation.

Description: The flow field around a proposed lunar return aerobrake is examined computationally assuming viscous, laminar flow and utilizing an effective gamma approach to incorporate real-gas effects. The flow fields for three cases are calculated with both an axisymmetric and a three-dimensional formulation. The three vehicle configurations have braking panels extended 50 deg, 55 deg, and 60 deg to the inflow (zero lift configurations). The resulting axisymmetric and 3D flow fields are examined, and it is shown that despite complexities in the 3D flow field, the total drag coefficients calculated from modified axisymmetric results are very close to those obtained from the 3D solutions. The aerobrake is shown to achieve total drag coefficients as high as 8.4 for a vehicle with panels deflected to 60 deg.

Description: A coupled, trajectory based flowfield and material thermal response analysis is presented for the European Space Agency (ESA) proposed Rosetta comet nucleus sample return vehicle. The probe returns to Earth along a hyperbolic trajectory with an entry velocity of 16.5 km/sec and requires an ablative heat shield on the forebody. Combined radiative and convective, ablating flowfield analyses were performed for the significant heating portion of the shallow ballistic entry trajectory. Both quasi-steady ablation and fully transient analyses were performed for a heat shield composed of carbon-phenolic ablative material. Quasi-steady analysis was performed using the two-dimensional, axisymmetric codes RASLE and BLIMPK. Transient computational results were obtained from the one-dimensional ablation/conduction code, CMA. Results are presented for heating, temperature and ablation rate distributions over the probe forebody for various trajectory points. Comparison of transient and quasi-steady results indicates that, for the heating pulse encountered by this probe, the quasi-static approach is conservative from the standpoint of predicted surface recession.

Description: Formulations useful for engineering formulations are sought, with a view to a clearer physical understanding, of the phenomena that govern convective aerodynamic heating at the elevated speeds encountered in atmospheric missile trajectories. After discussing cold-wall laminar boundary layer heating, the complex boundary layer transition phenomenon and cold-wall turbulent boundary layer heating are treated. The current understanding of separated flow-region and shock-interaction heating is presented, together with an evaluation of heat-protection methods and a characterization of the influence of mass addition on laminar and turbulent boundary layers. Finite-difference method-based CFD code results are evaluated.