ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Data  (12)
  • Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16  (9)
  • ADCP data; Autonomous underwater vehicle; AUV; AUV underway data; BlueMining; Breakthrough Solutions for Mineral Extraction and Processing in Extreme Environment – Blue Mining; CTD data; DEPTH, water; Heading; LATITUDE; LONGITUDE; M127; M127_696-1; Meteor (1986); Pitch angle; Redox potential; Roll angle; Signal; TAG_field; Time in seconds; turbidity  (3)
Collection
  • Data  (12)
Keywords
Publisher
Years
  • 1
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 109861 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 175680 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 175680 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 184384 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 184384 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 115264 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 175741 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 175741 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Publication Date: 2023-01-30
    Description: Field studies were conducted in two different areas of the Limfjorden, in Lovns Bredning (26th February to 4th March 2017) and in Løgstør Bredning (6-10th March 2017). In each sampling area, 16 fixed-position moorings were deployed in two circular sensor arrays around a mussel dredging area to investigate possible effects of dredging related sediment plumes (Pastor et al, 2020). The inner array (stations 1 - 8) had a diameter of 200 m and the outer array (stations 9 - 16) was set up with a diameter of 600 m. Integrated temperature and light loggers (HOBO Pendant Temperature/Light 64K Data Logger) were mounted on each mooring in the two circular arrays at three different water depths (0.5, 1.5 and 3.0 m above seabed). The 48 loggers (3 depths and 16 stations) were deployed in each area over a period of four days and light intensity time series were collected with a sampling interval of 30 seconds. Five loggers in the Lovns area did not provide any data due to technical problems (two near-surface loggers and three loggers at 1.5 m above the seabed). However, only one bottom logger at Løgstør Bredning failed to provide data. Each time series was filtered using a 3-minute moving average for removing the largest outliers, but retaining sharp changes in light intensity associated with short-lived sediment plumes caused by experimental mussel dredging.
    Keywords: Date/Time local; Event label; Height above sea floor/altitude; HOBO_ON; HOBO Pendant Temperature/Light 64K Data Logger; Illuminance; light intensity; Limfjorden; MULT; Multiple investigations; mussel dredging; Onset HOBO data logger; Sediment plumes; Time in hours; TLi_01; TLi_02; TLi_03; TLi_04; TLi_05; TLi_06; TLi_07; TLi_08; TLo_09; TLo_10; TLo_11; TLo_12; TLo_13; TLo_14; TLo_15; TLo_16
    Type: Dataset
    Format: text/tab-separated-values, 109861 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Publication Date: 2024-04-20
    Description: A total of fifteen missions of the autonomous underwater vehicle (AUV) Abyss was performed in June 2016 over the TAG hydrothermal field as part of the EU-funded project Blue Mining. Each dive lasted a few hours and recorded information for a number of sensors including ADCP (RDI Teledyne Model WHN300 S/N), CTD (Seabird SBE49FastCAT), ECO (=combined fluorometer and turbidity senso; Wetlabs FLNTU/0712017), REDOX-sensor (Eh-sensor by Ko-Ichi Nakamura from AIST, South Korea) . The sensor data is recorded in separate files for each dive. The vehicles performance under water and core functions (roll, pitch, heading, power use, and many others) are recorded in the STATE file of each dive.
    Keywords: ADCP data; Autonomous underwater vehicle; AUV; AUV underway data; BlueMining; Breakthrough Solutions for Mineral Extraction and Processing in Extreme Environment – Blue Mining; CTD data; DEPTH, water; Heading; LATITUDE; LONGITUDE; M127; M127_696-1; Meteor (1986); Pitch angle; Redox potential; Roll angle; Signal; TAG_field; Time in seconds; turbidity
    Type: Dataset
    Format: text/tab-separated-values, 56826 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...