ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The Development of Thick Coats of Chemically-resistant PaintsThe article describes the behavior of 30 different chemically-resistant paints in industrial atmospheres in which hydrochloric acid was present in six different concentrations. The paints were of five different bases, viz.: vinylresin, chlorinated rubber, siccative oils, chloro-hydrocarbon and neoprene. The relation between the durability of the paint and the thickness of the coat was specially investigated. It was proved that it was not possible to obtain lasting protective coat on steel surfaces when the total thickness of the film was less than 5 mils = 0.125 mm. This was particularly evident in the various corrosive hydrochloric in the film or to an insufficient thickness of the film on irregularities of the steel surface (corners, edges, crevices, welds, etc.). The normal paints in use in industry, when applied in three coats, only furnish a film of a average thickness of 3.5 mils. When a film thickness of more than 5 mils is applied, the continuity of the surface is complete and sufficient, even over surface irregularities. In the case of thicknesses greater than 5 mils, the durability and life of the paint is dependent upon the basic resistance of the materials used in the manufacture thereof.
Notes:
Berichtet wird über das Verhalten von 30 Anstrichstoffen auf der Basis von Vinylharz, Chlorkautschuk, trocknenden Ölen, Chlorkohlenwasserstoff und Neopren in Industrieatmosphäre mit einem Gehalt an Salzsäure in 6 verschiedenen Konzentrationen. Dabei wird vor allem die Abhängigkeit der Anstrichhaltbarkeit von der angewandten Gesamtschichtdicke untersucht. Es wird der Nachweis geführt, daß unterhalb einer Filmdicke von insgesamt 5 mils = 0,125 mm, insbesondere in der aggressiven Salzsäureatmosphäre, ein dauerhafter Schutzanstrich auf Stahluntergrund nicht zu erzielen, ist, da in diesem Falle Filmdiskontinuitäten zurückbleiben oder der Anstrich über Unregelmäßigkeiten (Ecken, Kanten, Vertiefungen, Schweißnähten) der Unterlage nur eine ungenügende Filmdicke aufweist. Handelsübliche Industriefarben liefern im Dreischichtsystem nur eine mittlere Filmdicke von 3,5 mils. Bei Filmdicken über 5 mils ist die Kontinuität des Überzugs dagegen auch über Oberflächenunregelmäßigkeiten vollständig und ausreichend. Bei Dicken oberhalb dieser Grenze ist das Verhalten nur von der Resistenz des Systems abhängig.
Additional Material:
5 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19540050102
Permalink