ISSN:
1040-0397
Schlagwort(e):
Nickel
;
Cobalt
;
Constant current stripping potentiometry
;
Catalytic enhancement by nitrite
;
Trace analysis
;
Seawater
;
Wastewaters
;
Dimethylglyoxime
;
α-Benzyldioxime
;
Chemistry
;
Polymer and Materials Science
Quelle:
Wiley InterScience Backfile Collection 1832-2000
Thema:
Chemie und Pharmazie
Notizen:
A rapid and highly sensitive method using constant current stripping potentiometry for the determination of nickel and cobalt in seawaters and industrial wastewaters has been established. The method is based on the adsorptive accumulation of nickel and cobalt in the presence of either dimethylglyoxime (DMG) or α-benzyldioxime (α-BD) prior to stripping using a constant reducing current. Nitrite is used in the stripping step for the catalytic enhancement of the stripping signal. Analytical protocols for standard solutions using DMG or α-BD show good precision (RSD's between 3 and 4% on the same film) and detection limits (30 ng/L for Ni/DMG; 10-ng/L for Co/DMG; 9ng/L for Co/α-BD). However, iron interferes significantly with the determination of cobalt using α-BD. With DMG, the simultaneous determination of nickel and cobalt is possible and has been developed into a protocol readily applicable to the routine determination of these metals. The analytical protocol is rapid, easy to perform and the results are in agreement with those obtained by graphite furnace atomic absorption spectrophotometry. The DMG procedure has also been optimized for the determination of cobalt alone, which has advantages for determinations at concentrations of 1 μg/L or less.
Zusätzliches Material:
6 Ill.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1002/elan.1140071114
Permalink
