ALBERT

Description: The traditional polytetrafluoroethylene (PTFE)/Al reactive material liner shaped charge generally produces insufficient penetration depth, although it enlarges the penetration hole diameter by chemical energy release inside the penetration crater. As such, a novel high-density reactive material liner based on the PTFE matrix was fabricated, and the corresponding penetration performance was investigated. Firstly, the PTFE/W/Cu/Pb high-density reactive material liner was fabricated via a cold pressing/sintering process. Then, jet formation and penetration behaviors at different standoffs were studied by pulse X-ray and static experiments, respectively. The X-ray results showed that the PTFE/W/Cu/Pb high-density reactive material liner forms an excellent reactive jet penetrator, and the static experimental results demonstrated that the penetration depth of this high-density reactive jet increased firstly and then decreased by increasing the standoff. When the standoff was 1.5 CD (charge diameter), the penetration depth of this reactive jet reached 2.82 CD, which was significantly higher than that of the traditional PTFE/Al reactive jet. Moreover, compared with the conventional metal copper jet penetrating steel plates, the entrance hole diameter caused by this high-density reactive jet improved 29.2% at the same standoff. Lastly, the chemical reaction characteristics of PTFE/W/Cu/Pb reactive materials were analyzed, and a semi-empirical penetration model of the high-density reactive jet was established based on the quasi-steady ideal incompressible fluid dynamics theory.