ISSN:
1752-1688
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Architecture, Civil Engineering, Surveying
,
Geography
Notes:
: Concrete block irrigation diversion systems have been proposed as alternatives to permanent dams of concrete or rock or temporary gravel berms. Permanent dams can cause stream channel instability, bank erosion, sediment pollution, ice flow blockage, and safety problems for recreational floating craft. Temporary berms can require substantial streambed disturbance and can promote sediment pollution, stream bank instability, and bank erosion. A design procedure was developed based on a model of the hydraulic performance of concrete block diversion systems. The procedure was used to model a site on the Gallatin River in Montana. The method relies on HEC-RAS (Hydrologic Engineering Center -River Analysis System) software combined with analytical techniques in an iterative scheme. The hydraulic performance of different diversion configurations (the existing heavy-rock diversion system, concrete blocks oriented parallel to flow, and concrete blocks oriented diagonally) was assessed using the model under a range of flow rates. The minimum diversion dimensions (length, number, and size of blocks) that maintained block stability while diverting the requisite flow were determined for each model run. At the Gallatin River site, the block system oriented parallel to flow required less diversion material than the diagonal orientation. The recommended diversion length was 51.8 m (170 ft). Trapezoidal blocks with a top width of 20.3 cm (8 in), a height of 45.7 cm (18 in), and side slopes of 2 vertical to 1 horizontal were specified. This configuration minimizes the total block mass, diverts the required flow, and has a factor of safety of 2.0 against block displacement.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1752-1688.1998.tb04163.x
Permalink
