ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The orientation distributions of six tantalum samples, TaPA, TaG1, TaG2, TaQ2-S1, TaQ2-S2 and TaQ2-S4, were studied by neutron diffraction and ODF analysis. The TaPA specimen is a commercial tantalum sheet with an unknown fabrication history. The TaG1 and TaG2 were fabricated from a powder metallurgical ingot by uniaxial compression, and the TaQ2 type samples were fabricated from commercial stock by similar uniaxial forging. TaQ2-S1 is the section closest to the centre of the forged disc, S2 is the intermediate section, and S4 is the section adjacent to the periphery. The texture of TaPA consisted of many components, including {014}〈100〉, {111}〈¯321〉, {100}〈010〉, and [111]/[100] double-fibre textures with the fibre axes oriented parallel to the normal direction. The two TaG-type specimens were dominated by the [111]/[100] double-fibre texture, accompanied by a weak {100}〈010〉 cube texture. The three sections of TaQ2 had much higher degrees of texture than the TaG-type samples, with an extremely strong (111) peak, which consists of (111)〈11¯2〉, (111) 〈¯1¯12〉, and [111] fibre texture. The average pole density of the three equivalent orientations of (111)〈11¯2〉 was the strongest for the S1 with over 150 multiples of random distribution (mrd), and gradually decreased with increasing radial distance to about 100 mrd for the S4 section. On the other hand, the average intensity of (111)〈¯1¯12〉 type orientations was increased from about 40 mrd at S1 to about 100 mrd for the S4 section.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00354248
Permalink