ALBERT

Description: The Piano di Pezza fault is the central section of the 35 km long L'Aquila-Celano active normal fault-system in the central Apennines of Italy. Although palaeoseismic data document high Holocene vertical slip rates (~1 mm yr –1 ) and a remarkable seismogenic potential of this fault, its subsurface setting and Pleistocene cumulative displacement are still poorly known. We investigated for the first time the shallow subsurface of a key section of the main Piano di Pezza fault splay by means of high-resolution seismic and electrical resistivity tomography coupled with time-domain electromagnetic soundings (TDEM). Our surveys cross a ~5-m-high fault scarp that was generated by repeated surface-rupturing earthquakes displacing Holocene alluvial fans. We provide 2-D Vp and resistivity images, which show significant details of the fault structure and the geometry of the shallow basin infill material down to 50 m depth. Our data indicate that the upper fault termination has a sub-vertical attitude, in agreement with palaeoseismological trench evidence, whereas it dips ~50° to the southwest in the deeper part. We recognize some low-velocity/low-resistivity regions in the fault hangingwall that we relate to packages of colluvial wedges derived from scarp degradation, which may represent the record of some Holocene palaeo-earthquakes. We estimate a ~13–15 m throw of this fault splay since the end of the Last Glacial Maximum (~18 ka), leading to a 0.7–0.8 mm yr –1 throw rate that is quite in accordance with previous palaeoseismic estimation of Holocene vertical slip rates. The 1-D resistivity models from TDEM soundings collected along the trace of the electrical profile significantly match with 2-D resistivity images. Moreover, they indicate that in the fault hangingwall, ~200 m away from the surface fault trace, the pre-Quaternary carbonate basement is at ~90–100 m depth. We therefore provide a minimal ~150–160 m estimate of the cumulative throw of the Piano di Pezza fault system in the investigated section. We further hypothesize that the onset of the Piano di Pezza fault activity may date back to the Middle Pleistocene (~0.5 Ma), so this is a quite young active normal fault if compared to other mature normal fault systems active since 2–3 Ma in this portion of the central Apennines.

Description: We present the crustal resistivity structure of the Pamir and Southern Tian Shan orogenic belts at the northwestern promontory of the India–Asia collision zone. The magnetotelluric (MT) data were recorded along a roughly north–south trending, 350 km long corridor from the Pamir Plateau in southern Tajikistan across the Pamir frontal ranges, the Alai Valley and the southwestern Tian Shan to Osh in the Kyrgyz part of the Fergana Basin. In total, we measured at 178 sites, whereof 26 combine broad band and long period recordings. One of the most intriguing features of the 2-D and 3-D inversion results is a laterally extended zone of high electrical conductivity below the Pamir Plateau, with resistivities below 1 m, starting at a depth of ~10–15 km. The high conductivity can be explained with the presence of partially molten rocks at middle to lower crustal levels, possibly related to ongoing migmatization and/or middle/lower crustal flow underneath the Southern Pamir. This interpretation is consistent with a low velocity zone found from local earthquake tomography, relatively high v p / v s ratios, elevated surface heat flow, and thermomechanical modelling suggesting that melting temperatures are reached in the felsic middle crust. In the upper crust of the Pamir and Tian Shan, the Palaeozoic–Mesozoic suture zones appear as electrically conductive, whereas the compact metamorphic rocks of the Muskol-Shatput Dome of the Central Pamir are highly resistive. The intra-montane basin of the Alai Valley—sandwiched between the Pamir and Tian Shan—exhibits a generally conductive upper crust that bifurcates into two conductors at depth. One of them connects to the active Main Pamir Thrust, which is absorbing most of today's convergence between the Pamir and the Tian Shan. Several deeper zones of high conductivity in the middle and lower crust of Central and Northern Pamir likely record fluid release due to metamorphism associated with active continental subduction/delamination.

Description: Described are results of laboratory experiments which revealed regularities of gradual transition from stick-slip mode to aseismic creep. The behaviour of model gouge-filled fault was investigated with experimental setup of the spring-bock model. It was experimentally proven that small variations of a percentage of materials with velocity strengthening and velocity weakening properties in the fault principal slip zone may result in significant variation of the portion of seismic energy radiated during a fault slip event. The tests simulated different modes of interblock sliding whose characteristic values of scaled kinetic energy varied by several orders of magnitude, while differences in contact strength and shear stress drop remained relatively small. The obtained results led to the conclusion that the earthquake radiation efficiency and the fault slip mode are governed by the ratio of two parameters—maximum fault slip-weakening rate and shear stiffness of the enclosing massif. The ratio can be essentially changed by small variations of the material composition of the fault principal slip zone.

Description: The Scythian Platform (ScP) with a heterogeneous basement of Baikalian–Variscan–Cimmerian age is located between the East European Craton (EEC) on the north and the Crimean–Caucasus orogenic belt and the Black Sea (BS) Basin on the south. In order to get new constrains on the basin architecture and crustal structure of the ScP and a better understanding of the tectonic processes and evolution of the southern margin of the EEC during Mesozoic and Cenozoic time, a 630-km-long seismic wide-angle refraction and reflection (WARR) profile DOBRE-5 was acquired in 2011 October. It crosses in a W–E direction the Fore-Dobrudja Trough, the Odessa Shelf of the BS and the Crimean Plain. The field acquisition included eight chemical shot points located every 50 km and recorded by 215 stations placed every ~2.0 km on the land. In addition, the offshore data from existing profile 26, placed in the Odessa Shelf, were used. The obtained seismic model shows clear lateral segmentation of the crust within the study region on four domains: the Fore-Dobrudja Domain (km 20–160), an offshore domain of the Karkinit Trough at the Odessa Shelf of the BS (km 160–360), an onshore domain of the Central Crimean Uplift (Crimean Plain, km 360–520) and the Indolo-Kuban Trough at the Kerch Peninsula (km 520–620) that is the easternmost part of the Crimea. Two contrasting domains of the ScP within the central part of the DOBRE-5 profile, the Karkinit Trough and the Central Crimean Uplift, may represent different stages of the ScP formation. A deep Karkinit Trough with an underlying high-velocity (〉7.16 km s –1 ) lower crust body suggests its rifting-related origin during Early Cretaceous time. The Central Crimean Uplift represents a thick (up to 47 km) crustal domain consisting of three layers with velocities 5.8–6.4, 6.5–6.6 and 6.7–7.0 km s –1 , which could be evidence of this part of the ScP originating on the crust of Precambrian craton (EEC). The thick heterogeneous basement of the Central Crimean Uplift shows inclusions of granitic bodies associated with magmatic activity related with Variscan orogeny within the ScP. General bending and crustal scale buckling of the Central Crimean Uplift with a wavelength of 230 km could be an effect of the Alpine compressional tectonics in the adjacent Crimean Mountains. The extended/rifted continental margin of the ScP (EEC) at the Odessa Shelf and buckling/uplifted domain of the Central Crimean Uplift affected by compressional tectonics, are separated by the N–S oriented Western Crimean Fault. The crust of the southern margin of the EEC is separated from the ScP, which originated on the EEC crust tectonised and reworked during the Palaeozoic–Mesozoic, by the crustal fault of ~W–E orientation, which corresponds with the Golitsyn Fault observed at the surface between the EEC and the ScP. The Fore-Dobrudja Domain with a thick (〉10 km) heterogeneous basement and two subhorizontal layers in the crystalline crust (with velocities 6.2–6.3 and 6.4–6.65 km s –1 ) differs from the ScP crust and its origin could be very similar to that of the Trans-European Suture Zone and Palaeozoic West European Platform.

Description: This dataset contains ceilometer-derived cloud base height detected at the Princess Elisabeth station, East Antarctica (71°57'S - 23°21'E) in 2010 using the polar threshold algorithm. Dataset contains the data over one year, at 15 seconds resolution product: cloud base height (in meters a.g.l.) FOR DETAILS AND DATA AVAILABILITY, SEE : https://ees.kuleuven.be/hydrant/aerocloud/

Description: This dataset contains ceilometer-derived cloud base height detected at the Princess Elisabeth station, East Antarctica (71°57'S - 23°21'E) in 2011 using the polar threshold algorithm. Dataset contains the data over one year, at 15 seconds resolution product: cloud base height (in meters a.g.l.) FOR DETAILS AND DATA AVAILABILITY, SEE : https://ees.kuleuven.be/hydrant/aerocloud/

Description: This dataset contains ceilometer-derived cloud base height detected at the Princess Elisabeth station, East Antarctica (71°57'S - 23°21'E) in 2012 using the polar threshold algorithm. Dataset contains the data over one year, at 15 seconds resolution product: cloud base height (in meters a.g.l.) FOR DETAILS AND DATA AVAILABILITY, SEE : https://ees.kuleuven.be/hydrant/aerocloud/

Description: This dataset contains ceilometer-derived cloud base height detected at the Princess Elisabeth station, East Antarctica (71°57'S - 23°21'E) in 2015 using the polar threshold algorithm. Dataset contains the data over one year, at 15 seconds resolution product: cloud base height (in meters a.g.l.) FOR DETAILS AND DATA AVAILABILITY, SEE : https://ees.kuleuven.be/hydrant/aerocloud/

Description: This dataset contains ceilometer-derived cloud base height detected at the Princess Elisabeth station, East Antarctica (71°57'S - 23°21'E) in 2014 using the polar threshold algorithm. Dataset contains the data over one year, at 15 seconds resolution product: cloud base height (in meters a.g.l.) FOR DETAILS AND DATA AVAILABILITY, SEE : https://ees.kuleuven.be/hydrant/aerocloud/

Description: This dataset contains ceilometer-derived cloud base height detected at the Princess Elisabeth station, East Antarctica (71°57'S - 23°21'E) in 2016 using the polar threshold algorithm. Dataset contains the data over one year, at 15 seconds resolution product: cloud base height (in meters a.g.l.) FOR DETAILS AND DATA AVAILABILITY, SEE : https://ees.kuleuven.be/hydrant/aerocloud/