ALBERT

Description: The stability of small two-dimensional travelling-wave disturbances in an incompressible laminar boundary layer over a flexible surface is considered. By first determining the wall admittance required to maintain a wave of given wave-number and phase speed, a characteristic equation is deduced which, in the limit of zero wall flexibility, reduces to that occurring in the ordinary stability theory of Tollmien and Schlichting. The equation obtained represents a slight and probably insignificant improvement upon that given recently by Benjamin (1960). Graphical methods are developed to determine the curve of neutral stability, as well as to identify the various modes of instability classified by Benjamin as ‘Class A’, ‘Class B’, and ‘Kelvin-Helmholtz’ instability, respectively. Also, a method is devised whereby the optimum combination of surface effective mass, wave speed, and damping required to stabilize any given unstable Tollmien-Schlichting wave can be determined by a simple geometrical construction in the complex wall-admittance plane. What is believed to be a complete physical explanation for the influence of an infinite flexible wall on boundary-layer stability is presented. In particular, the effect of damping in the wall is discussed at some length. The seemingly paradoxical result that damping destabilizes class A waves (i.e. waves of the Tollmien-Schlichting type) is explained by considering the related problem of flutter of an infinite panel in incompressible potential flow, for which damping has the same qualitative effect. It is shown that the class A waves are associated with a decrease of the total kinetic and elastic energy of the fluid and the wall, so that any dissipation of energy in the wall will only make the wave amplitude increase to compensate for the lowered energy level. The Kelvin-Helmholtz type of instability will occur when the effective stiffness of the panel is too low to withstand, for all values of the phase speed, the pressure forces induced on the wavy wall. The numerical examples presented show that the increase in the critical Reynolds number that can be achieved with a wall of moderate flexibility is modest, and that some other explanation for the experimentally observed effects of a flexible wall on the friction drag must be considered. © 1962, Cambridge University Press. All rights reserved.