ISSN:
0021-8995
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
The effect of deformation history on the elongational behavior and spinnability of polypropylene melt was investigated by carrying out isothermal melt-spinning experiments. For the study, spinnerettes of different die geometries were used to investigate the effect, if any, of the entrance angle, the capillary length-to-diameter (L/D) ratio, and the reservoir-to-capillary diameter (DR/D) ratio on the elongational behavior of molten threadlines. An experimental study was also carried out to investigate the phenomenon of draw resonance in the extrusion of polypropylene melts through spinnerettes of different die geometries. Draw resonance is the phenomenon which gives rise to pulsations in the threadline diameter when the stretch ratio is increased above a certain critical value. The results of our study show that the critical stretch ratio at which the onset of draw resonance starts to occur decreases as the L/D ratio is decreased, as the entrance angle is increased, as the DR/D ratio is increased, as the melt temperature is decreased, and as the shear rate in the die is increased. Of particular interest is the observation that, at 180°C, the severity of fiber nonuniformity increases as the stretch ratio is increased, whereas at 200°C and 220°C, the severity of fiber nonuniformity first increases and then decreases as the stretch ratio is increased considerably above the critical value. A rheological interpretation of the observed onset of draw resonance is presented with the aid of the independently determined rheological data.
Additional Material:
22 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/app.1976.070200613
Permalink