ISSN:
1573-4862
Keywords:
Thermo-elasticity
;
noncontact NDE
;
photo-acoustics
;
composite
;
Gr/epoxy
;
ultrasonics
;
cscan
;
array
Source:
Springer Online Journal Archives 1860-2000
Topics:
Electrical Engineering, Measurement and Control Technology
,
Mathematics
Notes:
Abstract Critical issues are examined in the application of laser generation and detection of ultrasound to the inspection of large area air-frame composites. Among these issues are surface roughness, signal-to-noise ratio, insensitivity to the path length between the part and detector, and wide band vs. narrow-band generation. Demonstrated is the feasibility of transmission C-scans of 150 ply Gr/epoxy panels containing simulated delaminations. Waveforms having a signal-to-noise ratio of greater than 40 dB in 15-mm thick Gr/epoxy were obtained with generating laser powers well below the ablation limit for the graphite epoxy. Detection was shot-noise limited with a detector noise figure of about 5–10 dB.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00565641
Permalink
