ISSN:
1572-8765
Keywords:
aluminum alloys
;
dimple size
;
fractography
;
fracture mechanics
;
fracture toughness
;
tensile test
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Four 7075-T651 aluminum alloys have been tested in tension in order to assess the applicability of the Schwalbe's model to the fracture toughness calculation. Standard K IC tests were performed on compact tension samples at room temperature, and the results compared with those from the Schwalbe's model which takes into account several mechanical properties derived from a conventional tensile test applied on round unnotched tensile samples, and the average dimple size of the corresponding fracture surfaces. The values of K IC calculated through the Schwalbe's model, correlate qualitatively well with those from the standard technique. Fracture toughness deterioration is accompanied by a loss of the true fracture strain, strain hardening capacity and average dimple size. On the other hand, the higher the Zn/Mg ratio, the volume fraction of precipitates and the yield strength, the lower the fracture toughness. All these effects are originated in the presence of matrix precipitates. Therefore, the reduction in K IC can be explained in terms of the matrix response to the applied stress field as a function of the differences in volume fraction of the strengthening precipitates. The round tension samples corresponding to the four materials, failed in a predominantly ductile transgranular fashion, which facilitates the application of the Schwalbe's model based in the characteristic dimples, developed in this mode of fracture, as a microstructural element size.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1008620232065
Permalink