ALBERT

Notes: Me3SiCl bildet mit N-Methylimidazol (NMI) eine bei Raumtemperatur beständige, kristalline 1:1 Verbindung. Nach der Röntgenstrukturanalyse entsteht unter Spaltung der Si—Cl-Bindung und Anlagerung eines NMI-Rings eine Verbindung ionischer Struktur [Me3Si(NMI)]+Cl- 1. Die Reaktion von Me2HSiCl mit NMI (Molverhältnis 1:2) führt unter Spaltung der Si—Cl-Bindung und Koordination von zwei NMI-Ringen zur Verbindung [Me2HSi(NMI)2]+Cl- 2. Bei der analogen Umsetzung von Me2SiCl2 mit NMI (Molverhältnis 2:1) entsteht eine Verbindung, die Me2SiCl2 und NMI im Molverhältnis 1:2 enthält. Bei der Sublimation werden Einkristalle der Verbindung [Me2Si(NMI)3]2+ 2 Cl-· NMI 3 erhalten.

Notes: One of the basic prerequisites for rational and high quality production of plastic parts is a tool layout tailored to the production process. To date, both design and construction have generally been based on values acquired by experience. This first, necessitates highly qualified personnel and second, involves what is frequently time consuming and costly finishing work. Experience acquired so far with computer-aided layout of injection molds shows that even a designer with little experience reaches the target more quickly and more reliably. At the same time he is able to draw on the results of intricate calculation and simulation methods which he was unable to apply in the past for reasons of time alone. This paper thus sets out the possibilities currently open and the experience available for computer-aided mold layout. The chief point of focus here is a system for the layout of injection molds. Working on from this system, however, the potentials for computer application are presented for blow mold- and foaming mold-design. After finding the mold principle, mold layout essentially divides up into two major areas, namely dimensioning calculations (CAE) and compilation of production documents (CAD). In dimensioning, the different functional elements of the mold are calculated. The aids that have been developed and the potentials of computer-aided dimensioning are presented with examples from the fields of rheological, thermal, and mechanical mold layout. Computer-aided rheological layout divides up into two steps. The first gives information on qualitative filling behavior (filling picture, flow paths) and the second provides quantitative results (pressures, shear stresses, temperatures). Computer-aided thermal layout similarly divides up into part steps. These are a rough overall energy balance, a rough layout of the tempering system, a segmented layout, and a homogeneity check, which involves simulating the temperature conditions in the mold by means of difference methods. When it comes to mechanical layout of the mold, programs are available for deformation calculations on basic cases and these will frequently be sufficient. For more complex cases of loading and deformation, a finite element program is used. Graphic data processing units can be used to supply extra facilities - first, to provide an aid for the simulation programs in dimensioning and second, to rationalize the compilation of the production documents. An illustration of a CAD workplace is given, incorporating the necessary computer configuration and peripherals. Compiling production documents is essentially a problem of variant design. The variants in this case are the individual components of the mold and a number of standardized accessories that can be called up as “standardized components.” The mold cavity, however, always has to be a free design. All programs are dialogue driven and are in a standardized manner so that even designers with no data processing experience can use the computer as an aid. The CAD/CAE system presented duly fulfils all these requirements. It allows the designer, at a single computer work station, to carry out both simulation and dimensioning calculations, to obtain information on material data, and to compile production documents on the basis of variant and free design. This provides the designer with a readily manageable aid and makes a considerable contribution towards improving the design result. Finally, the capacity of different computer concepts and the CAE/CAD/CAM systems on the market are discussed. For the future it will be possible to establish a computer-aided link between the different areas of design, from development of the molded part, via mold design and production, through setting the processing parameters of the injection molding machine.

Notes: Summary The ultrastructural development of the principal cells in rat small intestine was studied by morphometric analyses in relation to the exact cell position along crypt and villus. From the bottom to the tip of the crypt, a gradual increase occurred in absolute size of the total cell, the cytoplasm, the terminal web and of nearly all cell organelles. Also, the relative size of the cytoplasm, mitochondria, microvilli and endoplasmic reticulum increased during crypt cell differentiation. No sudden changes in ultrastructure were observed in the so-called “critical decision zone”, normally located halfway up the crypt where the proliferative activity ceases. At the crypt-villous junction a 1.4–3 fold increase in cell size, cytoplasm, terminal web and of most organelles was noted. Expansion of the proliferative cell compartment over the total length of the crypt as occurs during recovery after a low X-irradiation dose (72 h after 400 R) does not affect the normal development of cellular ultrastructure. These findings are discussed in relation to biochemical and cell kinetic data.

Notes: Summary The neurosecretory system of the freshwater snail Bulinus truncatus was investigated. With the Alcian blue-Alcian yellow (AB/AY) staining method at least 10 different types of neurosecretory cells (NSC) were distinguished in the ganglia of the central nervous system. The differences in staining properties of the NSC — with AB/AY the cells take on different shades of green and yellow — are borne out at the ultrastructural level: the NSC types contain different types of neurosecretory elementary granules. The neurosecretory system of B. truncatus is compared to that of Lymnaea stagnalis, the species which has received the most attention among the pulmonates. It appears from the comparison that the systems of both species show many similarities, although some differences are also apparent.

Notes: Summary Pit cells — a new type of cell first described here and so named because they contain highly characteristic granules — are situated in the wall of rat liver sinusoids, and have hyaloplasmic pseudopodia intermingling with the microvilli of the parenchymal cells. The characteristic granules are mainly situated at one side of the nucleus, the other side showing organelle-free hyaloplasm. Pit cells are also found in portal tracts and in granuloma-like cellular aggregates. They also occur in rat peripheral blood, although there are morphological differences between cells in these two sites. Pit cells can be regarded as regular inhabitants of the sinusoidal wall, and therefore belong to the series of sinusoidal cells, i.e., the endothelial (Wisse, 1972), Kupffer (Widmann et al., 1972; Wisse and Daems, 1970; Wisse, 1974a,b), and fat-storing cells (Ito, 1973). Pit cells do not phagocytose and do not react to a great number of experimental conditions, to which endothelial and Kupffer cells do react (Wisse, 1972, 1974b). Mitosis has been observed in a pit cell. The function of pit cells remains obscure, but an endocrine function is suggested by the morphology of their highly characteristic granules.

Notes: Summary The effect of pimozide and an LHRH-analogue (LHRH-A) on gonadotropic cells of the goldfish pituitary gland were described qualitatively and quantitatively. A scale of four categories was devised to reflect various ultrastructural appearances of the cells. Experimental animals were divided into a control group, a group injected with LHRH-A alone, pimozide alone, and groups receiving these two substances in combination. Fish injected with the single substance were killed 12 h after injection while the groups receiving the combined treatments were killed at 4, 12 and 48 h. Serum levels of gonadotropin measured by radioimmunoassay were used to indicate whether an increase in hormone release had occurred. An immunocytochemical technique, the protein A-gold procedure, assured that the cells studied were gonadotropes. The control group showed variation in the profiles of gonadotropic cells. The single treatment groups showed some increase in secretory inclusions. At 4 h after injection the combined treatment caused a significant increase in hormone granules; at 12 and 48 h there was a gradual decrease in content of secretory products, and an increase in vacuolization. The results indicate that the combined pimozide and LHRH-A treatment stimulated gonadotropin production as well as release.

Notes: Thermo-oxidative ageing processes were investigated in films (100 μm thick) made from isotactic polypropylene with different antioxidant concentrations between 0% and 0.1% using isothermal long-term differential thermal analysis (ILDTA). The end of the oven life of polypropylene coincided with the loss of mechanical properties which was confirmed by tensile tests at temperatures far below the crystallite melting range. Already prior to the beginning of autocatalytic decomposition, ILDTA experiments permits conclusions to be drawn on the thermal history of the specimens and statements made regarding the end of thermo-oxidative stability of the polymer, which is accompanied by a deterioration in the mechanical properties.In consequence of the correlation between oxidation time and antioxidant concentration the local antioxidant concentration in sheets or films can be measured by ILDTA. Thus, investigating the diffusion of an antioxidant in polypropylene using ILDTA is possible.

Notes: Infrared spectroscopy was used for the determination of the base-pairing content of four specific tRNAs in deuterium oxide solution. Infrared spectra were obtained in the 1750-1550 cm-1 region at various temperatures ranging from about 15 to 90°C. Melting curves were constructed by plotting the molar extinction coefficient at ν = 1657 cm-1 versus temperature. These transition curves enabled us to determine the ranges of temperature which correspond to the ordered (partially double-stranded) or randomly coiled structure of the tRNA. For a set of wavenumbers the extinction coefficients at these temperatures were used for the calculation of the base-pairing content. The procedure employed here is based on a method described earlier by Thomas [(1969) Biopolymers 7, 325-334]. For the conditions selected for this investigation (Mg2+-free D2O-buffer; 0.01M tris-DCl, 0.015M NaCl, pD 7.5) the results of this determination agree within the limits of errors with the number of base pairs predicted by the cloverleaf model.

Notes: Recently, it was suggested that parallel β-sheets have a significant dipole moment, in contrast to antiparallel sheets. Ab initio molecular-orbital (MO) calculations on parallel and antiparallel β-strands of tetra(Gly) show that they have very similar charge distributions. Interaction energies between two and three strands of tetra(Gly), obtained using the direct reaction field Hamiltonian, show that a particular choice of point charges is probably not crucial for calculating interactions within β-sheets, but that it might be for calculating interactions between these sheets and other parts of a protein, in particular, α-helices. The point-charge representation of our MO-SCF results will probably reduce the hazard of introducing artefacts in electrostatic calculations of protein conformational energies, provided the short-range interactions are treated in a more realistic way, i.e., such that intra- and interchain induction effects are included.

Notes: Die Darstellung der freien Farbsäuren des Betanins und Betanidins wird beschrieben, ihre Bruttoformeln werden erörtert. Beide Verbindungen sind optisch aktiv. Sie spalten mit starker Natronlauge in der Hitze etwa 1/3 ihres Stickstoffes als Ammoniak ab. Quantitative Decarboxylierungsversuche und potentiometrische Titration weisen für das Glucosid wie für das Aglykon auf drei Carboxylgruppen, von denen eine durch eine basische Gruppe neutralisiert zu sein scheint, und eine schwach saure (phenolische) Gruppe hin. Beim oxydativen Abbau des Betanidins wurde L-Asparaginsäure erhalten.