ALBERT

Description: Seismic images of oceanic thermohaline finestructure record vertical displacements from internal waves and turbulence over large sections at unprecedented horizontal resolution. Where reflections follow isopycnals, their displacements can be used to estimate levels of turbulence dissipation, by applying the Klymak–Moum slope spectrum method. However, many issues must be considered when using seismic images for estimating turbulence dissipation, especially sources of random and harmonic noise. This study examines the utility of seismic images for estimating turbulence dissipation in the ocean, using synthetic modeling and data from two field surveys, from the South China Sea and the eastern Pacific Ocean, including the first comparison of turbulence estimates from seismic images and from vertical shear. Realistic synthetic models that mimic the spectral characteristics of internal waves and turbulence show that reflector slope spectra accurately reproduce isopycnal slope spectra out to horizontal wavenumbers of ∼0.04 cpm, corresponding to horizontal wavelengths of 25 m. Using seismic reflector slope spectra requires recognition and suppression of shot-generated harmonic noise and restriction of data to frequency bands with signal-to-noise ratios greater than about 4. Calculation of slope spectra directly from Fourier transforms of the seismic data is necessary to determine the suitability of a particular dataset to turbulence estimation from reflector slope spectra. Turbulence dissipation estimated from seismic reflector displacements compares well to those from 10-m shear determined by coincident expendable current profiler (XCP) data, demonstrating that seismic images can produce reliable estimates of turbulence dissipation in the ocean, provided that random noise is minimal and harmonic noise is removed.

Description: Internal tide generation, propagation, and dissipation are investigated in Luzon Strait, a system of two quasi-parallel ridges situated between Taiwan and the Philippines. Two profiling moorings deployed for about 20 days and a set of nineteen 36-h lowered ADCP–CTD time series stations allowed separate measurement of diurnal and semidiurnal internal tide signals. Measurements were concentrated on a northern line, where the ridge spacing was approximately equal to the mode-1 wavelength for semidiurnal motions, and a southern line, where the spacing was approximately two-thirds that. The authors contrast the two sites to emphasize the potential importance of resonance between generation sites. Throughout Luzon Strait, baroclinic energy, energy fluxes, and turbulent dissipation were some of the strongest ever measured. Peak-to-peak baroclinic velocity and vertical displacements often exceeded 2 m s−1 and 300 m, respectively. Energy fluxes exceeding 60 kW m−1 were measured at spring tide at the western end of the southern line. On the northern line, where the western ridge generates appreciable eastward-moving signals, net energy flux between the ridges was much smaller, exhibiting a nearly standing wave pattern. Overturns tens to hundreds of meters high were observed at almost all stations. Associated dissipation was elevated in the bottom 500–1000 m but was strongest by far atop the western ridge on the northern line, where 〉500-m overturns resulted in dissipation exceeding 2 × 10−6 W kg−1 (implying diapycnal diffusivity Kρ 〉 0.2 m2 s−1). Integrated dissipation at this location is comparable to conversion and flux divergence terms in the energy budget. The authors speculate that resonance between the two ridges may partly explain the energetic motions and heightened dissipation.

Description: A strong internal tide is generated in the Luzon Strait that radiates westward to impact the continental shelf of the South China Sea. Mooring data in 1500-m depth on the continental slope show a fortnightly averaged incoming tidal flux of 12 kW m−1, and a mooring on a broad plateau on the slope finds a similar flux as an upper bound. Of this, 5.5 kW m−1 is in the diurnal tide and 3.5 kW m−1 is in the semidiurnal tide, with the remainder in higher-frequency motions. Turbulence dissipation may be as high as 3 kW m−1. Local generation is estimated from a linear model to be less than 1 kW m−1. The continental slope is supercritical with respect to the diurnal tide, implying that there may be significant back reflection into the basin. Comparing the low-mode energy of a horizontal standing wave at the mooring to the energy flux indicates that perhaps one-third of the incoming diurnal tidal energy is reflected. Conversely, the slope is subcritical with respect to the semidiurnal tide, and the observed reflection is very weak. A surprising observation is that, despite significant diurnal vertical-mode-2 incident energy flux, this energy did not reflect; most of the reflection was in mode 1. The observations are consistent with a linear scattering model for supercritical topography. Large fractions of incoming energy can reflect depending on both the geometry of the shelfbreak and the phase between the modal components of the incoming flux. If the incident mode-1 and mode-2 waves are in phase at the shelf break, there is substantial transmission onto the shelf; if they are out of phase, there is almost 100% reflection. The observations of the diurnal tide at the site are consistent with the first case: weak reflection, with most of it in mode 1 and almost no reflection in mode 2. The sensitivity of the reflection on the phase between incident components significantly complicates the prediction of reflections from continental shelves. Finally, a somewhat incidental observation is that the shape of the continental slope has large regions that are near critical to the dominant diurnal tide. This implicates the internal tide in shaping of the continental slope.

Description: Simulations of steady two-dimensional stratified flow over an isolated obstacle are presented where the obstacle is tall enough so that the topographic Froude number, Nhm/Uo ≫1. N is the buoyancy frequency, h m the height of the topography from the channel floor and U o the flow speed infinitely far from the obstacle. As for moderate Nhm/Uo (̃1), a columnar response propagates far up-and downstream, and an arrested lee wave forms at the topography. Upstream, most of the water beneath the crest is blocked, while the moving layer above the crest has a mean velocity Um = UoH/(H-hm). The vertical wavelength implied by this velocity scale, λo = 2φU m/N, predicts dominant vertical scales in the flow. Upstream of the crest there is an accelerated region of fluid approximately λo thick, above which there is a weakly oscillatory flow. Downstream the accelerated region is thicker and has less intense velocities. Similarly, the upstream lift of isopycnals is greatest in the first wavelength near the crest, and weaker above and below. Form drag on the obstacle is dominated by the blocked response, and not on the details of the lee wave, unlike flows with moderate Nh m/Uo. Directly downstream, the lee wave that forms has a vertical wavelength given by λo, except for the deepest lobe which tends to be thicker. This wavelength is small relative to the fluid depth and topographic height, and has a horizontal phase speed cpx = U m, corresponding to an arrested lee wave. When considering the spin-up to steady state, the speed of vertical propagation scales with the vertical component of group velocity cgz = Um, where is the aspect ratio of the topography. This implies a time scale t̂= tNα/2φ for the growth of the lee waves, and that steady state is attained more rapidly with steep topography than shallow, in contrast with linear theory, which does not depend on the aspect ratio. Copyright © 2010 Cambridge University Press.

Description: A simple parameterization for tidal dissipation near supercritical topography, designed to be applied at deep midocean ridges, is presented. In this parameterization, radiation of internal tides is quantified using a linear knife-edge model. Vertical internal wave modes that have nonrotating phase speeds slower than the tidal advection speed are assumed to dissipate locally, primarily because of hydraulic effects near the ridge crest. Evidence for high modes being dissipated is given in idealized numerical models of tidal flow over a Gaussian ridge. These idealized models also give guidance for where in the water column the predicted dissipation should be placed. The dissipation recipe holds if the Coriolis frequency f is varied, as long as hN/W ≫ f, where N is the stratification, h is the topographic height, and W is a width scale. This parameterization is not applicable to shallower topography, which has significantly more dissipation because near-critical processes dominate the observed turbulence. The parameterization compares well against simulations of tidal dissipation at the Kauai ridge but predicts less dissipation than estimated from observations of the full Hawaiian ridge, perhaps because of unparameterized wave–wave interactions.

Description: The downward propagation of near-inertial internal waves following winter storms is examined in the context of a 2-yr record of velocity in the upper 800 m at Ocean Station Papa. The long time series allow accurate estimation of wave frequency, whereas the continuous data in depth allow separation into upward- and downward-propagating components. Near-inertial kinetic energy (KEin) dominates the record. At all measured depths, energy in downgoing motions exceeds that of upward-propagating motions by factors of 3–7, whereas KEin is elevated by a factor of 3–5 in winter relative to summer. The two successive winters are qualitatively similar but show important differences in timing and depth penetration. Energy is seen radiating downward in a finite number of wave groups, which are tagged and catalogued to determine the vertical group velocity cgz, which has a mean of about 1.5 × 10−4 m s−1 (13 m day−1). Case studies of three of these are presented in detail. Downward energy flux is estimated as cgz × KEin (i) by summing over the set of events, (ii) from time series near the bottom of the record, and (iii) from the wavenumber–frequency spectrum and the dispersion relationship. These estimates are compared to the work done on near-inertial motions in the mixed layer by the wind, which is directly estimated from mixed layer near-inertial currents and winds measured from a surface buoy 10 km away. All three methods yield similar values, indicating that 12%–33% of the energy input into the mixed layer transits 800 m toward the deep sea. This simple picture neglects lateral energy flux carried by the first few vertical modes, which was not measured. The substantial deep penetration implies that near-inertial motions may play a role in mixing the deep ocean, but the strong observed variability calls for a need to better understand the role of lateral mesoscale structures in modulating the vertical propagation.

Description: The three-dimensional (3D) double-ridge internal tide interference in the Luzon Strait in the South China Sea is examined by comparing 3D and two-dimensional (2D) realistic simulations. Both the 3D simulations and observations indicate the presence of 3D first-mode (semi)diurnal standing waves in the 3.6-km-deep trench in the strait. As in an earlier 2D study, barotropic-to-baroclinic energy conversion, flux divergence, and dissipation are greatly enhanced when semidiurnal tides dominate relative to periods dominated by diurnal tides. The resonance in the 3D simulation is several times stronger than in the 2D simulations for the central strait. Idealized experiments indicate that, in addition to ridge height, the resonance is only a function of separation distance and not of the along-ridge length; that is, the enhanced resonance in 3D is not caused by 3D standing waves or basin modes. Instead, the difference in resonance between the 2D and 3D simulations is attributed to the topographic blocking of the barotropic flow by the 3D ridges, affecting wave generation, and a more constructive phasing between the remotely generated internal waves, arriving under oblique angles, and the barotropic tide. Most of the resonance occurs for the first mode. The contribution of the higher modes is reduced because of 3D radiation, multiple generation sites, scattering, and a rapid decay in amplitude away from the ridge.

Description: A parameterization is presented for turbulence dissipation due to internal tides generated at and impinging upon topography steep enough to be “supercritical” with respect to the tide. The parameterization requires knowledge of the topography, stratification, and the remote forcing—either barotropic or baroclinic. Internal modes that are arrested at the crest of the topography are assumed to dissipate, and faster modes assumed to propagate away. The energy flux into each mode is predicted using a knife-edge topography that allows linear numerical solutions. The parameterization is tested using high-resolution two-dimensional numerical models of barotropic and internal tides impinging on an isolated ridge, and for the generation problem on a two-ridge system. The recipe is seen to work well compared to numerical simulations of isolated ridges, so long as the ridge has a slope steeper than twice the critical steepness. For less steeply sloped ridges, near-critical generation becomes more dominant. For the two-ridge case, the recipe works well when compared to numerical model runs with very thin ridges. However, as the ridges are widened, even by a small amount, the recipe does poorly in an unspecified manner because the linear response at high modes becomes compromised as it interacts with the slopes.